Latest oil painting item Tenders | Government oil painting item Tenders

Central Government/Public Sector

CTN :45548817

16 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of underframe details (cross member assy,stiffeners etc) fortrain set dtc coaches to drg no. 1. 72711024, alt."b" -1 no 2. 72711025, alt."b" -1 no 4. 72711027 alt 'c' -1 no, 3. 72711026 alt 'c' -1 no, 5. 72711028-1 no, 6. 72711029-1 no, 7. aae11542-1 no,8. aae11102-1 no, 9. aae11101, alt."a" -2 nos, 10. aae11192-2 nos, 11. aad11701 alt 'b'-1 no, 12. 72711039 alt 'a'-1 no, 13. 72711040 alt 'a'-1 no, 14. aad11526 alt 'b' -13 nos 15. aad11955 alt 'a' -1 no, 16. 72711041 alt 'a' -1 no, 17. 72711042-1 no, 18. 72711037-1 no, 19. 72711038-1 no, 20. 72711015 alt 'a' -9 nos, 21. 72711016 alt 'a' -9 nos, 22. aae11137 alt 'a' -1 no, 23. aae11138 alt 'a' -1 no, 24. 72711030-1 no, 25. 72711031-1 no, 26. 72711035, alt 'a'-1 no, 27. 72711036, alt 'a'-1 no, 28. aad11944, alt 'a'-2 nos, 29. aad11945-2 nos, 30. aad11946-2 nos, 31. aad11950, alt 'b'-1 no, 32. aad11951, alt 'b'-1 no, 33. aad11964-2 nos, 34. aae11134, alt 'a' -1 no, 35. aae11131, alt 'a' -1 no, 36. aae11381, alt 'a' -1 no, 37. aae11071 -1 no, 38. ssa11103 -1 no,39. ssa11104 - 1 no, 40. 72611031 - 1 no, 41. 72611032, alt 'a' - 1 no, 42. aae11590, alt 'b'- 2 nos, 43. 72611029 - 1 no, 44. 72611030 - 1 no, 45. aae11657 alt 'a'- 2 nos, 46. aae11658 - 4 nos, 47. aae11660 - 2 nos, 48. aae11587 - 2 nos, 49. aae11586 - 2 nos, 50. aaa12540, alt 'a' - 2 nos, 51. aae11697 - 2 nos, 52. aae11698 - 2 nos, 53. aae11591 - 4 nos, 54. aae11663 - 4 nos, 55. aae11661 - 2 nos, 56. aae11662 - 2 nos, 57. aae11059, alt 'b' - 1 no, 58. aae11060, alt 'b' - 1 no, 59. aae11588, alt 'a' - 1 no, 60. aae11589 - alt 'b' -1 no, 61. aae11730 - 2 nos, 62. aae11731 - 2 nos, 63. aae11664 - alt 'b' -2 nos, 64. 72711052 alt 'a'-1 no, 65. aae11802 - 2 nos, 66. aai11574 - 2nos, 67. aai11588 - 2 nos, 68. aab12088 - 2 nos, 69. aai11576 - 2 nos, 70. aai11572, alt 'a' - 1 no, 71. 89811025 - 1 no, 72. 89811024 - 1 no, 73. aai11571, alt 'a' - 1 no. special condition : all the items are to be supplied as coach set only. finished components except ss components shall be thoroughly cleaned and latest to a dft of minimum 60 microns and mdts-094, rev.-01 with dmnd.-01 or latest shall be applied with epoxy zinc phosphate primer as per rdso/specno.m&c/pcn/100 followed. for procedure and colour shade excluding the areas as specified in detail drawings. suitable packing to be done to prevent damage during transit, unloading and rust prevention during storage. stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (c) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # final product inspection. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45549200

09 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of under frame arrgt for memu/dmc/3ph to drg no. 74511059, alt 'c' col 1. firm shall fulfill the manufacturing facility as per icf/md/spec-147, issue status-01 rev.02 with amendment no.02. special condition : packing condition as per drg no icf/j&t/misc-2487 alt 'b'. the under frame should be supplied as normal side up and side bearer side down. details for satge inspection. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item] [ warrantyperiod: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45546948

02 Jul, 2026 NA

Mysore - Karnataka

Tender For supply of high pressure hose suitable for application of high viscous paints such as p u paints, high build epoxy paints, fluoropolymer (fluoroethylene) paints, enamel paints, primer paints, etc. material type: core polyamide reinforced cover polyurethane blue colour suitable for application of heavy duty airless spray painting equipment having 420 bar to 480 bar pressure. for chemical resistance to solvents and aggressivefluid along with suitable connector as per annexure-i in the make: - vr coatings or tiger or graco or kremlin or jaguar or pilot or wagner only.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45551224

03 Jul, 2026 NA

Villupuram - Tamil Nadu

Tender For dn/mas acting for and on behalf of the president of india invites e-tenders against tender no m-sg-2026-515-ms_vm-2 closing date/time 03/07/2026 15:00 hrs. bidders will be able to submit their original/revised bidsupto closing date and time only. manual o ers are not allowed against this tender, and any such manual o er receivedshall be ignored.1. nit headername of worksignalling and telecom portion of work in connection withengineering works in chennai beach(msb)-villupuram(vm)section overchennai division.(msb-vm-2026-2)bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime03/07/2026 15:00date time of uploadingtender09/06/2026 16:19pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 14550242.18tendering section signalbidding style[ decision at schedulelevel ]bidding unitearnest money (rs.) 291000.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 12 monthscontract type works - general contract category expenditurebidding start date 19/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-sor 2022 items9145422.44above/below/par1please see item breakup for details. 9145422.44 at par9145422.44description:- sor 2022 itemss.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () b-non sor items5404819.7411 3900.00numbers 100.00 390000.00 at par 390000.00 rs.description:- provision of 7.2 mm holes in old/new rails to provide continuity bonding /polaritybonding etc (all other material required for the work shall be supplied by contractor) (this scheduleincludes the xing of bond wire in the 7.2 mm hole). the bond wire and channel bond pins will besupplied by railways)22606.00numbers 670.00 406020.00 at par 406020.00 rs.description:- releasing and re xing of tld boxes in dc track circuits. (this work includes releasingthe existing track connections and reconnecting the track connections after the completion of workalong with provision of necessary holes for connecting lead wires and painting of track particulars.all the materials required for the above work shall be supplied by the contractor as per the directionof the rly engineer at site.3360.00numbers7400.00 444000.00 at par 444000.00 rs.description:- re xing of released point m/c (all types) and its gound connections (existing pointmachine) including wiring and termination in point m/c and interconnections between point m/c andct box through pvc hose pipe and painting (all types of insulations connected to point work , alltypes of bolts and nuts, washer springs/ at , pvc hose pipe, 3/0.75 sq.mm copper wire,7/1.4 sq.mmcopper wire, paints and other miscellaneous items shall be supplied by the contractor). the workshall be carried out as per the instruction of engineer at site.4110.00numbers3600.00 396000.00 at par 396000.00 rs.page 1 of 16run date/time: 09/06/2026 16:19:30chennai division-s and t/southern rlytender documenttender no: m-sg-2026-515-ms_vm-2closing date/time: 03/07/2026 15:004description:- releasing and re xing of cable termination box for point machine (existing pt ctbox)- this work involves breaking of concrete andreleasing the existing cabletermination box andkeep it a side casting of foundation and erection of the released ctbox and carrying out the interconnection between point machine and ct box. the work shall be carried out as per the instrution ofengineer at site.55141.00numbers3771.78 531820.98 at par 531820.98 rs.description:- all type point machine ground connections to be released carefully withoutdamaging, kept aside and re- x the same after completion of engineering work. the work shall becarried out as per the instruction of engineer at site.66 8000.00numbers 5.70 45600.00 at par 45

CTN :45473506

15 Jun, 2026 NA

Liluah - West Bengal

Tender For supply of set of spare parts of airless spray painting machine model no. tiger 40.110, make: vr coating pvt. ltd. items/ material details as per annexure attached.- service kit set for hydraulic part 110 cc , piston seat assembly , sensing valve , slider assembly , suction hose cup 1" bsp , filter cassette 60 mesh , ser kit for falcon gun with seat & needle

CTN :45518182

18 Jun, 2026 42.78 Lacs

Delhi - Delhi

Tender For annual repair and maintenance of to goi press colony gpra qtrs at mayapuri new delhi during 2026-27 sh- supply of painting material for external finishing

Central Government/Public Sector

CTN :45384656

20 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For corrigendum : provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, c

CTN :45526448

25 Jun, 2026 NA

Patiala - Punjab

Tender For supply of material for providing of entry gate on footpath of main entry - m.s. angle , m.s. flat , cutter blade , grinder blade , welding rod , m.s. nut bolt , red oxide primer , s/e black paint, t.t. oil ,painting brush , malmal

State Government

CTN :45397974

18 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

Central Government/Public Sector

CTN :45487188

09 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of underframe complete for lwlrrm amrit bharat coaches to drg. no.lp11103,alt d, anx 9 without item 30 to drg. no.1.11012.0.03.095.001 with additional brackets to drg no 53811115, alt 'a'. the manufacturing facility as per icf/md/spec-147, issue status-01, rev-02 with amendment no.'02'. special condition : the underframe should be supplied as normal side up and side bearer side down. packing condition as per drg no. icf/j&t/misc-2487, alt 'b'. stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion.[safety item] [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Oil Painting Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector