Latest oil painting Tenders | Government oil painting Tenders

CTN :45727070

09 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For supply of bricks , sand , agg 20mm , agg 10mm , agg 63mm , coarse sand , cement , binding wire tata , white cement jk , wire brush , enamel paint gloss r y b g bk wh 6 ltr each , enamel paint matt r y b g bk wh 6 ltr each , turpentine oil , cotton waste , poster colour 12 shade , water tube colour 12 shade , glass marking pencil , distemper white , wall putty , emery paper 200 320 and 400 nos 25 each , stainer wall nut rose wood oak yellow red brown teak , washing thinner , touchwood 4 ltr pack , stain powder r br y bk 1 kg each , writing brush round 0 to 12 no , writing brush flat 0 to 12 no , water painting brush 0 to 12 no , oil painting brush 0 to 12 no , mixing plate tray , distemper brush , roller brush , putty blade , paint brush 1 inch , paint brush 2 inch , paint brush 4 inch , glass glue locitte , glass 2mm , glass 8mm , glass sanding disc , masking tape , acrylic putty , wall primer , canvas board 16 inch x 12 inch fine grain , universal stainer r y b g 1 btl each , diamond glazer , malmal cloth , duco primer , duco paint gloss r y b g bk wh 6 ltr each , duco paint matt r y b g bk wh 6 ltr each , duco thinner , pgi sheet 8 ft x4 ft x 24g , gi wire 2mm , gi wire 4mm , ms flat 1 pt 5 inch x 1 pt 5 inch x 5mm , ms flat 1 inch x 1 inch x 5mm , ms flat 2 inch x 1 inch x 5mm , ms square pipe 1 inch x1 inch x3mm , ms round pipe 1 inch x 3mm , ms rod 25mm , ms round bar 10mm , ms angle iron 25x25x3mm , ms angle iron 35x35x3mm , ms sheet 6 ft x 3 ft x 3mm , aluminium plate 3 ft x 4 ft , ms flat 2 inch x 5mm , gi pipe 3 by 4 inch , gi rivet no 8 500 gm , gi rivet no 10 500 gm , gi rivet no 12 500 gm , distilled water , u clip 6 mm , u clip 7 mm , u clip 9 mm , rawlplug 1 pt 5 , casing capping 25mm , extension board 15 amp modular , 3 pin top 15 amp , capacitor 42 mfd , fire fighting foam chemical 1 by 2 ltr btl , timber teak 10 ft x 2 inch x 2 inch cft 5 , timber sheesham 8 inch x 6 inch x 1 inch , plywood 8 ft x 4 ft x12mm , plywood 8 ft x 4 ft x 19mm , cnc bit flat bottom straight flutes bit 2 3 4 6 mm 5 each , cnc bit ball nose bit round tip 2 3 4 6mm 5 each , welding rod no 10 , cutting disc 14 inch , grinding disc 4 inch , grinding disc 8 inch , cutting disc 4 inch , aluminium filer rod 1 by 8 inch , brass rod 1 by 6 inch , copper rod 1 by 16 inch , brazing flux 1 kg pkt , acetylene gas , oxygen gas , co2 gas , nitrogen gas , soft coal , hack saw blade 12 inch , drill bit all size 2 to 13 mm bosch , power hacksaw blade 18 inch , black screw 3 by 4 inch 500 pc , black screw 1 inch 500 pc , black screw 2 inch 500 pc , sanding disc 4 inch , tile cutter blade 4 inch , tile cutter blade 121 by 141 bosch gdc , marbal grinding disc size 0 1 2 3 60 80 120 2 each size , marble polishing disc , silicon sealant with gun 250ml , pu expanding foam sealant with gun 250ml , spray paint gun , chain saw blade 18 inch , chain saw blade 16 inch , hand gloves , welding holder , hacksaw frame , duracell bty 1 pt 5v ultra

CTN :45587458

02 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For corrigendum : supply of provn of fighting pd constructed by brickwork , entrance canopy , loop hole on three sides , prefabricated steel door , steel double bunk , steel roofing trough srt , ismb 150 x 75mm x 3 point 46 mtr , 12 mm dia tmt bar , 8 mm dia tmt bar , ms binding wire , paint og synthetics enameled , paint brown synthetics enameled , red oxide primer , turpentine oil , painting brush 75mm , hdpe sand bags , wpc is2645 , ceiling at the bottom of ismb , ldpe film , tools and plants one set

CTN :45513465

30 Jun, 2026 9.44 Lacs

Imphal - Manipur

Tender For bid to ras bid to ras portland pozzolana cement , coarse sand , coarse aggregate , bricks sub , self tapping screws , ms square , hdpe sand , plywood commercial , app water , ceiling fan , synthetic enamel paint , pvc sheathed , thinner , distemper oil , painting brush 100mm , painting brush 75mm , pvc elbow 110mm , pvc elbow 75mm , pvc socket 110mm , ppr socket 20mm , ppr socket 25mm , ppr tee 25mm , ppr reducer , wooden scatling , nails 1 inch , hinges for , aldrop comp , ppgi sheet , self tapping screw , mild steel round , change over switch , pvc insulated , four layer hdpe , led tube , led bulb , ppr pipe , ppr elbow 25mm , ppr elbow 20mm , male threated socket , female threated socket , binding wire , non skid , metal cutter disc , metal cutting disc , welding rod , mild steel , acrylic sheet , male threated elbow , female threated elbow , pvc nahani trap , plastic tarpaulin , pvc waste , hand gloves

CTN :45671410

07 Jul, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of 06 x toilet cum bathing cubicle (4/4) in ferozepur - toilet cum bathing cubicle structure with pre-fab colns, purlins, rafters, wall (gi metal skinned puf panels), ppgi roof. pvc door (08 nos) of size 750 x 2100 mm and aluminum ventilator (08 nos) of size 450 x 450 mm, including all necessary fixing arrangement and fittings accessories as per tech specification and drawing att., well burnt common building bricks of sub class b of size 23 x 11.5 x 7.5 cm conforning to is: 2212-1991, opc (43grade) confirming to is 8112 in 50 kgs hdpe bags (make -ultratech/ ambuja/acc), 20mm graded stone aggregate (crushed) conforming to is-383 1970. they shall be clean, hard, tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities., 40mm graded stone aggregate (crushed) conforming to is-383 1970., they shall be clean, hard, tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities., interlocking tiles of size (200 x 120 x 60 mm thick gde m-35) i section of best quality., fine sand shall be clean, free from adhesive coating and shall not contain clay, mica and other impurities. the maximum quantities of clay and fine silt in sand shall not be more than 5% by mass as per is-383-1970., hard core stone aggregate 50-63 mm size., non skid ceramic floor tiles of size 400 x 400 x 7 to 8 mm thick. they shall be abrasion resistant conforming to is-15622, make: johnson/ kajaria/somany, looking mirror size 600x450mm of best quality aluminium frame and brass screw and washer for fixing with wall panel. make: modi guard /saint goban, white cement. make:- jk/ birla, water proofing compound, cement based paint for external wall. make:- shalimer/ asain/ berger, welding rod, oil bound distemper (off white) make: shalimer/asain/ berger, sand paper, turpentine oil, painting brush 4"., painting brush 2"., red oxide primer. make:- berger / shalimar / asian, paint synthetic enamel black colour. make:- berger / shalimar / asian, ms flat 35 x 3 mm, cp soap dish 125 mm. make: - hindustan/ jaguar/ sona/ prayag, angle iron staging of size 1.5 x 1.5 x 2.5 m with vertical ms angle columns of size 50 x 50 x 6 mm with 3mm thick ms sheet fitted at top of the staging work as shown in drg along with connecting accessories make: jindal/tata/sail/rinl, 1.25 mm thick ms sheet manhole cover of size 600 x 600 mm, incl ms handle of size 25 x 5 mm, with angle iron 40 x 40 x 5 mm all around and cross bracings. make: jindal/tata/sail/rinl, soakage pit cover of size 2.56x1.56m with angle iron 50 x 50 x 5 mm with all around and cross bracing and 1.25mm thick ms sheet including 600 x 600 mm suiteble opening cover with handle, septic tank cover of size 2.0 x 1.22m with angle iron 50 x 50 x 5 mm with all around and cross bracing and 1.25mm thick ms sheet, rotational moulded high density polyethylene water storage tank (cylinderical vertical tank) of 1000 ltrs capacity as per is 12701 of 1996 along with 20 mm dia brass valve with pvc float ball. make: - sintex/ polycon/ hindustan, gi socket 15 mm, isi marked. make: jindal/tata/sail/rinl, gi elbow 15 mm, isi marked. make: jindal/tata/sail/rinl, gi tee 15 mm, isi marked. make: jindal/tata/sail/rinl, gi union 15 mm, isi marked. make: jindal/tata/sail/rinl, cp bib cock 15 mm dia long body isi marked. make: - jaguar/ onida/hindware, gl pipe 15 mm dia, isi marked, make: jindal/tata/sail/rinl, gi nipple 15 mm 3" long, isi marked, make: jindal/tata/sail/rinl, gi plug 15 mm, isi marked, make: jindal/tata/sail/rinl, 15 mm dia pvc connection pipes, isi marked, gi socket reducer 20-15 mm, isi marked, make: -jindal/tata/sail/rinl, gi pipe 20 mm dia med grade, isi marked, make: -jindal/tata/sail/rinl, gi socket 20mm, isi marked, make: - tata/ jindal/ ravindra, gi elbow 20 mm, isi marked, make: jindal/tata/sail/rinl, gi tee 20 mm, is

CTN :45688511

15 Jul, 2026 2.40 Lacs

Gandhinagar - Gujarat

Tender For supply of chalk powder , gum camel , fevicol , compass acrylic color perl yellow orange and red and blue and green and violet and black , white perl color , metallic color golden and silver , painting brushes set of 12 professional brush for acrylic watercolor and oil painting , decorative mirror - abhala- different color , har dori for jewelry , pearls for jewelry - manka , butti jummar , double ring , hand needle big , hand needle small , rubber string , string , cutter , nose player , hacksaw blade , fabric color , rubber solution , steel scale 24 inch , steel scale 12 inch , pop , plastic dabba big , plastic dabba small , mdf 8 x 4 playwood sheet , plastic jar 100 ml , plastic jar 1 kg

CTN :45648463

02 Jul, 2026 15.04 Lacs

Imphal - Manipur

Tender For supply of hdpe sand bags , hdpe tarpaulin , mild steel corrugated , pendent holder , mcb amp sp , mcb amp dp , m seal , bed switch , gi binding , nails assorted , tripple layer , led flood , pedestal fan , led batten , galvanised steel two , portland pozzolana , concertina coil , synthetic enamel , led bulb w , switch piano , socket 35 pin , mcb distribution , ceiling fan mm , modular socket , modular switch , blanking plate , surface mounting , combined cover , mild steel , stainless steel , pixel bulk head , pvc frame , cp towel , exhaust fan mm , vitreous china , cp cast , pvc toilet , cp toilet , wall mounted , ppr stop , cp shower , pvc flushing , pvc switch board , batten holder , pvc soap , lc set , white cement , pvc insulated , plywood commercial bwr , coir mattress coir , fuel filter genr , oil filter genr , air filter genr , exhaust fan kva , exhaust fan for , oil pipe genr , engine oil , insulation tape , switch socket , socket pin , pvc sheathed , pvc casing capping , change over , security light , change over switch , flexible cable twin , 100 amp 3 phase , pvc bib cock , teflon tape , ppr gate , solvent cement , ppr pipe pn , ppr pipe , ppr elbow , pvc swr , ppr elbow , ppr tee , garden pipe , pvc float , door magnet , door handle , window door , wiremesh 2mtr , touch wood , thinner for , plywood enamelled face , app water , pvc connection pipe , veneered particle or , taping screw , pink primer , distemper oil , painting brush

Corporations/Associations/Others

CTN :45662707

02 Jul, 2026 4.05 Lacs

Multi City - Karnataka

Tender For supply and maintenance of necessary materials for 7 pure drinking water units in bilagi town - item description: painting steel work with deluxe multi surface paint to give an even shade. two coat applied @ 0.90l/10 m² over an under coat of primer applied @ 0.80 l/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge.. (pwd sr v-2, 2023-24, item no-8.33.3, page no-46), item description: providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge..:(pwd sr 2023-24 / volumme ii / i.no-8.3.2 /p.no-41), item description: supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer-in-charge.(csr 2023-24 v-2 itm no.11.6.1 pg 78), item description: dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of engineer-in-charge. for thickness of tiles 10 mm to 25 mm (pwd sr 2023-24 / volumme ii /i.no-19.22.1 /p.no-189), item description: providing and laying cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per engineer incharge (pwd sr 2023-24 / volumme ii / i.no-9.4 /p.no-59), item description: flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.(pwd sr 2023-24 / volumme ii / i.no- 9.35 /p.no-64), item description: providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered upvc (matching to ral-9016) sections and with minimum tio2 (titanium dioxide) at 6phr with tpe(thermo plastic elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with galvanized iron profile through-out the window frame. the outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with gi reinforcement of 2mm and mesh sash of size 37mm x 58mm. coextruded glazing bead for fixing of glass shall be of size 20mm x 24 mm. windows shall be provided with 6mm plain float glass, standard hardware& multi point locking system with touch lock. wall thickness of frame & sash shall be of 2mm-2.5mm. maximum possible size 2419mm x 2200mm (the cost is inclusive of all fixtures and separate charges for minor t&p s shall not be made) (pwd sr 2023-24/volumme ii/i.no-12.90 /p.no-110), item description: providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel prime

State Government

CTN :45661343

03 Jul, 2026 75.37 Lacs

Ambala - Haryana

Tender For providing and fixing of pool equipment accessories in swimming pool at sport complex sector-10, ambala city. “providing and fixing of pool racing lane and pool standard podium and other equipment accessories etc. complete in all respect and all other works contingent thereto.” (including three-year defect liability /mtc. free of cost. ) - [1.pm057] pm057. hire charges for jcb with bucket capacity more than 0.75 cum with fuel and driver [rate], [10.2]supplying and filling in plinth with sand (conforming to zone-iv, is 1542) under floors, including watering, ramming, consolidating and dressing complete. [through rate], [10.50.1]providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. 1. polished granite stone slab jet black, cherry red, elite brown, cat eye or equivalent. [through rate], [11.13.2]cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 2. 20 mm cement plaster [through rate], [11.52]cement rendering on plaster 1 mm thick [through rate], [12.134.4]providing and fixing factory made upvc white colour sliding glazed window up to 1.50 m in height dimension comprising of upvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware`s and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of engineer-in-charge. (single / double glass panes, wire mesh and silicon sealant shall be paid separately). variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 4. three track three panels sliding window with fly proof s.s wire mesh (two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 1.75 sqm). [through rate], [12.171]providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer-in-charge (door handle, lock and stopper etc.to be paid separately). [through rate], [12.177.1]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 1. with toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) [through rate], [13.41]providing and fixing stainl

CTN :45197349

24 Jun, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras supply of 125mm long. , aluminium tower bolts 100mm long. , gi red elbow 15mm x 20mm. , aluminium tower bolts 150mm long. , stainless steel sliding door bolt 300mm , aluminium curtain rod 19mm dia 20 feet length , gi plug 15 mm dia. , aluminium aldrop bolt 150mmx12mm dia , hasps and staples aluminium 100 mm , gi nipple 20mm dia x 50mm length , pvc water storage tank 500 ltr , pvc tank 1000 ltr capacity , wash hand basin 550x400mm , pvc low level flushing cistern 10 ltr capacity , european wc with s trap , glass pane 4mm , iwc orrisa patern 580 x 440 mm , pvc rain water pipe 100mm 6m long , pvc bib tap long body 15mm bore , float valve pvc 20mm dia , pvc bib tap long body 15mm , pvc waste pipe 32 mm dia for urinal , bitumen tape flash strip 100mm wide 10 mtr long , pvc connection of size 15mmx600mm , glass pane froasted 4mm , 4- tier metal shoe rack, 20 pairs metal shoe tower shelf storage cabinet 35.6 x 11.9 x 33.3 inches , pvc internal fitting for ll cistern , m seal. , looking mirror 21x15 inch with pvc frame. , angle stop cock ptmt 15mm dia. , kitchen sink coupling 100mm best quality. , pillar tape ptmt 15mm dia. , kitchen sink with drainboard of 1mm thick 37 x 18 x 8 inch. , road stud rectangular poly carbonate 125mm x 125mm x 25mm with a shank of 65mm red or yellow. , dark eye polyurethane portable speed bumps size l-500xw-100xh015mm , self adhesive bituminous felt fibre glass based. 3mm thk for water proofing in 20 mtrs roll. , glazed oil putty in 10kg bag. , pvc float valve for ll flush cistern , pvc float valve 25mm. , ss wire mesh mosquito proof 24 guage 16 aparture in standard roll size 4 feet wide x 15 or 20mrs long. , pvc connection of size 15mm x 450mm. , pvc waste pipe 32 mm dia 900mm corrugated , pvc water tank cover 500 ltrs. , speed bump made from heavy duty abs or yellow combination. l 70mm w 23mm available on both sides in red yellow colour with h 75mm w 250mm cat no se 503 , ss wire mesh mosquito proof 24 guage 16 aparture in standard roll size 3 feet wide x 15 or 20 mrs long. , plastic seat cover for wc white. , pvc bathroom cabinet 510x450x100mm with mirror one side plate complete. , bitumen washer for roof sheet , pvc waste pipe 32 or 40mm dia with swivel arm 225 mm. , pvc shower rose 125mm dia with swivel arm 225mm. , helical door spring 150 mm , pvc connection pipe for gyser inlet 15mm x 450mm long. , pvc waste pipes 32mm dia for whb. , pvc flush handle for ll cistern , pvc conncetion 600mm. , tank nipple 20mm with check nut , rubber gasket beading for doors 40mm widex6mm thick , tank nipple 15 mm with check nut , pvc waste coupling 32mm dia for wash hand basins. , bitumen leak stop best quality , shower rose ptmt 15mm x 100mm , pvc stop cock 15mm , white cement in pack . , wooden beading 10mm width for doors and windows. , pvc grating 100mm dia for floor. , stop cock ptmt 15 mm dia , nails wire 75mm. , pvc waste pipes 32mm x 750mm long. , wire nail 25mm long x 2mm dia. , nail 30 or 25mm. , hasps and staples aluminium 150mm. , nails 50mm. , nails 40mm , hacksaw blade 12 inch. , shalipatch ready made bituminous pot hole patching mix , kit for pvc low level cistern 10 ltr cap white colour , cushion foam 32 mm density covered with super cloth 22 feet x 21 feet. , teak wood beading 2 inch used on edges of doors, window etc , plywood commercial 4mm thick 8 feet x 4 feet conforming isi ost face , teak wood beading 2 inch used on edges of doors windows etc , ply wood commercial 12mm thick 6 feet x 3 feet conforming isi , spirit de-natured , lakh dana for polishing , ply wood commercial 12mm thick 7 feet x 3 feet conforming isi , thinner //bid details 2 / 114

CTN :45606733

27 Jun, 2026 1.93 Lacs

Malda - West Bengal

Tender For procurement of materials and repairing of pump house, internal wiring at fatepur-i hdtw( ml no 238) mouza, jl no 35, plot no 634, fatepur-ii hdtw( ml no 3) jl no 35, plot no 78 under fatepur mouza, at old malda block, malda. - procurement of materials, c.i. sluice valve with hand wheel, 151marked,15:14846. ) 150 rnrn dia. (sor wrdd ch)13.00 rates of materials for the program 2021-2022 item no-18a) page- 3), 150 mm dia ms plate flange ( rate approved by se dated 14.05.2020), repairing of pump house, stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish and stacking anywhere within the compound as directed., dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m in ground floor including roof. (a) up to 150 mm. thick, dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof, single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand., cement concrete with graded stone ballast (40 mm size) excluding shuttering in ground floor. (a) pakur variety a) 1:3:6 proportion, hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (a) 25 mmto 30 mm thick wooden shuttering as per decision and direction of engineer-in charge., reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation, basement and upto roof of ground floor /upto 4 m. ( i ) tor steel/mild steel. ii. jsw/jspl/shyam/srmb/ bmasl/elecrosteel/ssl, ordinary cement concrete (mix 1:1.5:3) with graded stone chips ( 20 mm down ) excluding shuttering and reinforcement. if any,in ground floor. as per is 456-2000. a) pakur variety (rate analysis), plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(b) with (1:4) cement mortar. (ii) 15 mm thick plaster, neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc., artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m all complete including all materials and labour. in ground floor. 3 mm thick topping (high polishing grinding on this item is not permited) with ordinary cement. (iii) 25 mm thick, applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. (in ground floor)applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint

Oil Painting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

State Government