Latest oil pipe line Tenders | Government oil pipe line Tenders

State Government

CTN :42830563

10 Dec, 2025 11.41 Lacs

Vizianagaram - Andhra Pradesh

Tender For painting of 19nos badly rusted ms type towers of 132kv vontithadi lilo line from 112/1 to 112/20 (except 112/10) with one coat of red oxide and one coat of aluminium paint in vizianagaram district

State Government

CTN :42999783

04 Dec, 2025 6.62 Lacs

Hyderabad - Telangana

Tender For laying of 400/300/250mm dia di water supply line to ms.aspire spaces pvt under ameenpur section ,sd-ii, operation and maintenance div-xxii,file no 2025-5-2085

Central Government/Public Sector

CTN :42989120

03 Dec, 2025 NA

Delhi - Delhi

Tender For corrigendum : replacement of electric wiring, fan and fittings in agd at new broadcasting house new delhi.(2025-26). (ii)rmo substation at new broadcasting house new delhi.(2025-26) (sh- annual non- comprehensive maintenance of 2x1250 kva substation i/c servicing ,cleaning and over hauling). (iii)rmo at new broadcasting house new delhi.(2025-26) (sh- repairing and replacing of defective ms pipe line etc.) (iv)replacement of florescent tube with retrofit led tube within existing mirror optic electric luminari

State Government

CTN :43003455

23 Dec, 2025 82.1 Thousand

Bilaspur - Chhattisgarh

Tender For re-fitting of theft angle piece/tower parts on tower with transportation, loading/unloading of material and punching, welding of nut-bolt of 220 kv dcds kotmikala-anuppur (amarkantak) line under jurisdiction of tlm s/dn. csptcl, korba. by cutting ms/gi angles to requisite length and making hole as per requirement on each piece at site. all material required for angle piece refitting will be provided by csptcl, transportation of angle piece, nut & bolt, spring washer etc. from tlm store korba to working site is to be done by contractor on his cost. details of location. 1. 220 kv dcds kotmikala-anuppur (amarkantak) line loc no. 02,03,04,07,12 & 13. total tower loc. no. 06. total angle pieces=162 nos.

Central Government/Public Sector

CTN :42585044

08 Dec, 2025 NA

Raipur - Chhattisgarh

Tender For corrigendum : procurement of atlas copco compressor spares installed at stage 2 ahpdadri - vlv mnt kit,2910 3054 00,atlas copco, throttle valve kit,2910305500,compressor, maint. kit,2906 0260 00,atlas copco,za6h, pipe seal kit,2906 0257 00,atlas copco, nipple,1621183400,atlas copco, seal washer,0661100033,atlas copco, wtr pe hex bolt,0147140203,atlas,za6h, wtr pe blt wshr,0301235800,atlas,za6h, oil pipe line,1621192600,atlas,za6h, pressure screw,0627422403,atlas copco, coupling,0634100020, tlas,zr500

corporations/Associations/Others

CTN :43003424

23 Dec, 2025 4.34 Lacs

Kolkata - West Bengal

Tender For laying of 150mm and 200mm dia ms pipe for diversion of water supply pipe line at suryanagar in ward 98 br x

CTN :42999164

08 Dec, 2025 49.99 Lacs

Mumbai - Maharashtra

Tender For renovation of aluminium sliding window with provide & fixing of f.r.p. weather shed, g.i.precoated sheet, m.s. grill, drain line, plaster and painting of jamdar qrts. at arthur road jail, mumbai.

CTN :42922643

10 Dec, 2025 NA

Coimbatore - Tamil Nadu

Tender For purchase of equipments - purchase of equipment:chromatographic workstation with capillary injector, packed injector, and auto-sampler should be quoted. chromatography workstation instruments should be built with self-diagnostic features and active-time management tools for better productivity, general features of chromatography workstation: column oven can accommodate two columns with maximum temperature range up to 400 c with set point resolution of 0.1 c. it should support 20 ramps & maximum temperature ramp rates of 100 c /min. cool down of oven from 400 c to 50 c in less than 5 min. fully automated with electronic pneumatic control afc / ppc / epc (digital control) for injector gas afc/epc/ppc should provide optimum performance with all types of capillary columns. system should have the capability to install a minimum of three injection and four detector ports. capable of detecting h and o across 0.01% 100% ranges (i.e., both trace in a matrix and bulk near-pure streams) column oven: operational temperature range: ambient +10 to 400 c overheat protection: programmable up to 420 c injector port: split/spitless injector 1 no packed injector 1 no, maximum temperature: 400 c, pressure setting range 0 100 psi with control setpoint of 0.01psi for specified pressure range., carrier gas flow control should have constant flow, constant pressure modes and constant linear velocity. auto injector: automatic sample injector up to 15 vials 2 ml vial with crimp set 100 nos, detector: flame ionisation detector (fid) 1 no, minimum detectable quantity: 3 pgc/s or more liner dynamic range: 1 107, maximum acquisition rate: 4 ms (250hz), thermal conductivity detector, sensitivity: >40000 mv maximum acquisition rate: 4 ms, maximum operating temp: 400 cgas cylinders & fittings, gas sampling: zero air, h2, n2 and helium gas cylinder with 2-stage regulators, each 1 no. four-stage gas purification panel and gas tubing. quote a suitable gas sample injector apparatus for the analysis of co2 gas, gas standards and a suitable packed column quote a 6-port gas sampling valve suitable for both manual (through syringe) and auto injection (online) quote sample line, sample loop, heated lines, filters, safety hydrogen purging, and flow control of gas. calibration gasses: suitable gas standards such as ar, he, h2, o2, co and ch4 should be providedpc and ups: pc i5 (or higher), 8gb ram, 1tb hdd, 22-inch led monitor (or higher), ssd: 512 gb, windows 10 os (or higher), wired keyboard and mouse. laser printer b/w, online ups sine wave capacity of 5 kva with battery power backup of 1 hour should be provided by the supplier general terms and conditions:warranty: 3 years manufacturer s warranty certificate. vendor should be an authorised provider of sophisticated high-precision chromatograph workstation systems for the past 15 years or more with: a proven track record in multiple countries and national institutes standard quality certifications such (iso 9001) 5+ past installations of similar systems in india. compliance statement should be enclosed with the quotation. the installation should be done at free of cost. hands-on training for 1 day for two trainees (faculty and scholars) must be provided on operation, maintenance and troubleshooting to two to two-three persons at the site of installation. if required, hands-on training must also be given to our faculty/scholars at a later stage, without any financial commitment to university. the technical details of the quoted instrument must be available on the official website of the principal supplier. the vendor should provide the list of end-users (recent) with contact details. the vendor must submit the latest reference letters from their previous users. trained service engineers in india (with suitable certificates) for the quoted model must be readily available to resolve the technical problems. a list of recent scientific publications in reputed journals from the user institutions where the quoted mode

CTN :42990723

05 Dec, 2025 18.77 Lacs

Mumbai - Maharashtra

Tender For improvement of passage and drainage line at old masjid patra chawl, m.s. ansari marg in e ward.

CTN :42701545

06 Dec, 2025 14.08 Lacs

Moradabad - Uttar Pradesh

Tender For corrigendum : (line 02) ward no- 01 me irfan mulla ji ke makaan se khem singh va m.s. public school tak c.c. interlocking road va u-type r.c.c. naali nirman karye.

Oil Pipe Line Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others