Latest oil terminal Tenders | Government oil terminal Tenders

Central Government/Public Sector

CTN :45366634

22 Jun, 2026 25.00 Lacs

Ferozepur - Punjab

Tender For corrigendum : repair to sunken flooring, plumbing with connected items to otm accn in aor of age b/r-ii of ge (east) ferozepur cantt - demolition of un-reinforced cement concrete in any position, complete all as specified and directed., m&l for cement concrete (1:5:10) type e-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete, complete all as specified and directed., m&l for 15 mm thick rendering over concrete surface of sunken floor in cm 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using wpc complete all as specified and directed.(wpc measured and paid separetely), m&l for water proofing treatment to rcc sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:-(a) applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.(b) app based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.note: (i) laying of app based membranes shall be done by torch on method or as per manufacturers instructions.(ii) a minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturers instructions.(iii) all ci/pvc traps in sunken slabs to be enclosed with pcc 1:1.5:3(min 15 cm) all round., supply only integral water proofing compound, complete all as specified and directed., taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including wpc,preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed. (wpc measured and paid separately), m&l for preparing old surfaces plastered or unplastered of walls, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement based paint complete all as specified and directed., m&l for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement complete all as specified including preparation of new surfaces of wall and applying two coats of oil bound distemper on walls including corneces, pillars etc complete all as specified & directed., m&l for preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed., m&l for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings, complete all as specified and directed., m&l for preparing old surfaces plastered or unplastered of ceiling, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime wash (white washing), complete all as specified and directed., resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 sqm but n.exc. 2 sqm each complete all as specified & directed., taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 square metre each including cut

Central Government/Public Sector

CTN :45512816

23 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 45 )items as given below ,[1] scrapping,moorum over wbm surface 100.000 m2,[2] earth wrk,box cutg,175m 1400.000 m3,[3] dressing and chilchalling road flanks 100.000 m2,[4] disposal,debris 1000.000 m3,[5] lay bitumin macadam,hotmix plnt,15-20tph 1250.000 m3,[6] layg thk20mm premix carpet,hotmix palnt 84000.000 m2,[7] layg 6mm nominal thick premix carpet 84000.000 m2,[8] layg tack coat,wbm surface,4kg/10m2,m/c 20100.000 m2,[9] providing & laying tack coat over wbm 5000.000 m2,[10] layg tack coat,wbm surface,3kg/10m2,m/c 84000.000 m2,[11] providing & laying tack coat bituminous 168000.000 m2,[12] supply,sand including spreading 250.000 m3,[13] supply of moorum including stacking 20.000 m3,[14] labour f/spreading moorum to proper lvl 20.000 m3,[15] supply approve quality stone metal&stack 600.000 m3,[16] applg,thermoplastic paint 3600.000 m2,[17] instln 3m microprismatic lens cats eye 3000.000 ea,[18] scrapping, cleaning etc. 50000.000 m2,[19] supply approved quality slag metal&stack 180.000 m3,[20] extra over premix carpet for plastic use 21000.000 m2,[21] extra over seal coat for plastic use 21000.000 m2,[22] supply and installation of bumps 70.000 m,[23] dismantling of brick work 5.000 m3,[24] disman of pcc 5.000 m3,[25] disman,rcc 5.000 m3,[26] prvdg&placing,steel reinf 2.000 to,[27] rcc,w/down stone chips,1:1.5:3 10.000 m3,[28] flyash br wrk,230mm,m7.5,super sturcture 5.000 m3,[29] plaster,cement mortar,thk12mm 50.000 m2,[30] nmnl mix,m-15 cc w/grd stone,f/basement 5.000 m3,[31] ctrld cc grd m30 mix,gnd flr 20.000 m3,[32] supply,hume pipe,dia300mm 5.000 m,[33] prvdg,layg,jtng,r.c.hume pipe,450nb 5.000 m,[34] supply,hume pipe,dia500mm 5.000 m,[35] microsurfacing type-ii 7000.000 m2,[36] microsurfacing type-iii 3500.000 m2,[37] providing and laying 25mm thick mastic 10500.000 m2,[38] providing and laying dense graded bm 1260.000 m3,[39] providing and laying bituminous concrete 940.000 m3,[40] providg bituminous concrete with plastic 300.000 m3,[41] wet mix macadam base course 630.000 m3,[42] labour for spreading stone 630.000 m3,[43] labour for spreading slag metal 189.000 m3,[44] sweeping,road mechanically 10500.000 m2,[45] prvdg,shuttering 200.000 m2

CTN :45531294

19 Jun, 2026 4.74 Lacs

Visakhapatnam - Andhra Pradesh

Tender For construction of balance modular rcc precast compound wall with concertina coil, chain link fencing with angular iron posts, rcc foundation for 10m aluminium tower, providing and fixing of inaugural plaque with brick wall and other miscellaneous works, visakhapatnam sh : providing and fixing of granite plaque, rccc base for tower and other misccellaneous workssubwork/packages:sh providing and fixing of granite plaque, rcc base for tower and other miscellaneous works

Central Government / Public Sector

CTN :45515896

10 Jul, 2026 NA

Vadodara - Gujarat

Tender For auction sale of ewaste, e-waste, e-waste (v2) - forward auction for disposal of obsolete it hardware such as desktops, laptops, servers, printers, networking equipment, and other it peripherals lying at indian oil corporation limited, gujarat state office based location (sidhpur terminal, vadodara black oil terminal, gri koyali, sanand bottling plant & gujarat state office).

State Government

CTN :45502985

16 Jun, 2026 21.18 Lacs

Malappuram - Kerala

Tender For dismantling the damaged old drain. the provisions for rising drain wall up to road level pcc for base wall, rcc m20 concrete for slabs and construction of irish drain

State Government

CTN :45482296

13 Jun, 2026 49.9 Thousand

Nadia - West Bengal

Tender For notice for the vbgram materials supply - supply of first aid box including medicines (specified by pia) at, model citizen information board for ibs( specification-made of, with a height of 3ft, width 2ft and thickness of 4 inch & 30 degree, head with pentagonal shape including fixing the mgnrega, biswa bangla logo in upper side of the board and supply in, mgnrega worksite anywhere., model citizen information board for community (specification-, of brick structure with plastering and colour ( back colour, and black for writting) with a height of 4ft, width 3ft and thickness, 4 inch & 30 degree in head with pentagonal shape including fixing, the mgnrega and biswa bangla logo in upper side of the board, supply in the mgnrega worksite anywhere., g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size, mmx47 mm with a wall thickness of 5 mm, made out of extruded, mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated, factory made solid panel pvc door shutter consisting of outer, made out of m.s. tubes of 19 gauge thickness and size 19 mmx19, mm for styles, top and bottom rails, m.s. frame shall have cost, steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame, made of flat bent bar, end bifurcated with necessary screws etc., cement concrete(1:2:4) as per direction. (cost of concrete will be, paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured, from extruded section conforming to i.s. specification (i.s. 205/66), and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x, 4.0mm, anodised aluminium barrel / tower / socket bolt (full covered) of, approved manufactured from extruded section conforming to i.s., 204/74 fitted and fixed with cadmium plated screws: (vi) 200mm, long x 10mm dia. bolt., anodised aliminium d-type handle of approved quality, manufactured from extruded section conforming to i.s. specification, (i.s. 230/72) fitted and fixed complete: (a) with continuous plate, base (hexagonal/ round rod) (iii) 100 mm grip x 12 mm dia rod., (c) supplying 6 levers 'godrej' crystal satine mortice lock with keys, including fitting & fixing complete., i) iron hasp bolt of approved quality fitted and fixed complete, (oxidised) with 16mm dia rod with centre bolt and round fitting. (, 200mm long, door stopper.(brass), red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings, conforming to is-13592-1992 (a) (i) single socketed 3 meter length, (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings, conforming tois:13592-1992 with all necessary clamps nails,, including making holes inwalls, floor etc. cutting trenches in any soil, through masonry concrete, structures etc if necessary and mending good damages including, joining withjointing materails (spun yarn, valamoid/bitumen/m-seal, etc) complete. a) upvc pipes: (ii) 110 mm. dia., s, d) shoe (ii) 110 mm. dia, qgs seed(10 variety), g.i. hollow pipe squre or

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

CTN :45478135

29 Jun, 2026 4.00 Lacs

Chhindwara - Madhya Pradesh

Tender For purchase of rcc precast colour bench, reinforced concrete grade m-30 (rcc), thickness 100mm, back height 1000mm, front heitht 400mm, base width 620mm

CTN :45419985

10 Jun, 2026 5.18 Lacs

Shimla - Himachal Pradesh

Tender For provision of rcc base for boilers at rashtrapati niwas mashobra shimla.

CTN :45417876

23 Jun, 2026 4.50 Crore

Leh Ladakh - Jammu And Kashmir

Tender For supply and laying of precast interlocking concrete block (pilcb) of size 200 mm x 100 mm x 120 mm with tongue and groove interlocking arrangement conforming to is 15658 - 2006, m-50 grade for roads/ vehicular road, including edge block of size 200 mm - “supply and laying of precast interlocking concrete block (pilcb) of size 200 mm x 100 mm x 120 mm with tongue and groove interlocking arrangement conforming to is 15658 : 2006, m-50 grade for roads/ vehicular road, including edge block of size 200 mm x 230 mm x 250 mm of m-50 grade on both sides and embedment over l-shaped pcc m35 grade of size 350 x 150 mm base and 150 mm x 150 mm side ky, filling of ilcb joints with fine sand including cost of sand, compaction all as specified and directed on road dbo to bpm hut to nhsl specification between km 8.550 to km 10.550 (net length 2.000 km) under 78 rcc/ 50 brtf project himank in ut of ladakh (2nd call)"

Oil Terminal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

State Government

State Government

State Government