Latest oil testing machine scrap Tenders | Government oil testing machine scrap Tenders

State Government

CTN :41305125

12 Aug, 2025 2.50 Lacs

Lalpur - Gujarat

Tender For providing of selection of laboratories for testing of products/material - analyser for chemistry testing at biochemistry department; buyer to use custom filter to input technical specification of the product/material so that service provider may provide price off..

Central Government And Public Sector

CTN :41308960

01 Sep, 2025 NA

Bangalore - Karnataka

Tender For "guide roller assembly as per wap drg.no.711091610390 for m2&m 10 bucket elevator of sand plant.special condition:-1)material test certificate should be enclose d along with supply for roller tube to is:3601 (item no 3)and for shaft material (item n o 1) 2)the bearing fitted shall be procured from authorized agents and the supply shal l accompany inspection certificate from the bearing manufacturers or their authorize d testing agent preferably incorporating the details of trace abllity of the bearing. ]

CTN :41163507

09 Aug, 2025 1.45 Lacs

Bangalore - Karnataka

Tender For corrigendum : providing of selection of laboratories for testing of products/material - as per scope of work; as per scope of work; complete job; as per scope of work

CTN :40855814

04 Aug, 2025 NA

Lucknow - Uttar Pradesh

Tender For bid to ras tender for supply of repair replacement maintenance of lt ug cable at af station memaura : : - excavation in trenches n exc 1 point 5 m wide and nexc 1 point 5 m in depth and getting out soft loose soil complete all as specified and as directed for laying of under ground cablepipe etc complete all as specified and as directed 46 cum , returning filling in including spreading leveling watering and well ramming in layers n exc 25 cm thick in softloose soil complete all as specified and directed 26 point 2 cum , removing surplus excavated material to a distance not exc 50 meter and depositing where directed at level not exc 1 point 5m above the starting point complete all as specified and directed 19 point 8 cum , material and labour for providing sand cushioning with dry fine sand including filling spreading levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed 13 point 6 cum , supply and lay burnt best quality locally available old size sub class b bricks laid in trenches perpendicular to ug cable for cable protection complete all as specified and as directed 1000 each , laying only serviceable bricks obtained from the items specified hereinbefore ie during taking out of under ground cablelaid flat dry in trenches with width of the bricks laid to the axis of cable for protection of cable complete all as specified and as directed 300 each , taking out unserviceable lt ug cable from trenches of size 400 sqmm 3 point 5 core complete all as specified and as directed 190 rm , supply laying and testing of lt cable 1100 volt grade xlpe insulated underground electric cable pvc bedded and sheathed steel wirestrip armoured aluminum stranded conductor of size 400 sq mm 3 point 5 core complete all as specified and directed make havells grandlay gloster 165 rm , relaying of serviceable lt ug cable of size 400 sqmm 3 point 5 core obtained from item no 7 complete all as specified and as directed 25 rm , hiring of cable fault detector to dedect exact position of fault for xlpe lt cable 1100 volts grade heavy duty aluminium conductor of any size as required length including transporting charges etc all as specified and directed 01 each job , supply and fixing of cable jointing kit for 1 point 1 kv grade cable for straight through cold shrinkable type joint for 400 sq mm 3 point 5 core xlpe aluminum armored conductor cable complete all as spd make 3m raychem m seal 01 each , schedule of credit for old us items will be the property of contractor

CTN :41287395

08 Aug, 2025 6.06 Lacs

Chandigarh - Chandigarh

Tender For replacement of electrical accessories, ceiling fan and tube lights in inspection bungalow building, sector 19 chandigarh. - dsr item no. 1.10 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required., group c, dsr item no. 1.15 rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /pvc conduit including dismantling as required., group c, dsr item no. 1.21 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 20 mm, 25 mm, dsr item no 1.17 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, dsr item no.1.24 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., 5/6 a switch, 3 pin 5/6 a socket outlet, dsr item no.1.25 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., dsr item no.1.26 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required., dsr item no.1.27 supplying and fixing following size/ modules, gi box along with modular base & cover plate for modular switches in recess etc. as required., 1 or 2 module (75 mmx75 mm), 3 module (100 mmx75 mm), 4 module (125 mmx75 mm), 6 module (200 mmx75 mm), 8 module (125 mmx125 mm), 12 module (200 mmx150 mm), dsr item no.1.31 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required., dsr item no.1.32 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 a & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required., dsr item no.1.57 supplying & fixing suitable size gi box with modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, "c" curve including connections, painting etc. as required., dsr item no. 2.10 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required., single pole, dsr item no.2.5 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer) as required (note: vertical type mcb tpdb is normally used where 3 phase outlets are required)., 8 way (4 + 24), double door, s/i/t/c of 1x18/20watt. led box type fittings made of crca sheet with 1 nos. led tube rods. the fittings should be installed on existing surface. the led tube rod should be of philips/ wipro/ havells/ bajaj/ crompton/ trilux/ panasonic/ lt/ jaquar/ surya make of polycarbonate material only. (as per complete item no. 14 of the dnit)., s/i/t/c o

CTN :41286627

18 Aug, 2025 NA

Multi City - Maharashtra

Tender For tender no. sp/t-0627/0725 [8th call] (rfx no.7000037093) for supply of equipments/ material, erection, testing and commissioning of 1x125mvar 400kv bus shunt reactor with allied bay equipment & replacement of old 2x50 mvar 400kv line reactors by 2x80 mvar 400kv switchable line reactors for 400kv khadka-koradi & 400kv khadka-akola lines at 400kv khadka s/stn dist (jalgaon) under nashik zone (reactor will be provided by msetcl)

CTN :41273460

16 Aug, 2025 NA

Gopalganj - Bihar

Tender For supply of mechanical engineering equipments - models and charts , drawing equipments and instruments , models for projection and demonstration , combined shear force and bending moment apparatus , heat pump , separating and throttling calorimeter , indicator unit , green sand moulding up, casting up and patterns , hot forging equipment , punching blanking press , screw pitch gauge , working models of surface condenser , refrigerant leak detector , air conditioning test rig , air conditioning unit , sling psychrometer , natural convection apparatus or test rig , forced convection apparatus or test rig , thermal conductivity apparatus , stefan boltzmann up , thermal conductivity apparatus for composite wall , advanced casting equipments and tools , 3d printer , bicycle free wheel sprocket mechanism, geneva mechanism, ackermans steering gear mechanism and foot operated air pump mechanism , different types of cams, follower sand cam follower arrangements , various belt drives, chain and sprocket , various types of brake assemblies , vehicle tyre balancing machine , proximity sensor kit , temperature transducer kit , pressure transducer kit , flow sensor kit , thermistor , thermocouple , stepper motor control trainer , hydraulic motor trainer , cut sections of pumps, actuators, valves and accessories used in hydraulic systems , working models of pumps, actuators, valves and accessories used in hydraulic systems , oil hydraulic trainer , advanced electro hydraulic and electro pneumatic hardware systems , out put devices , thermal actuators , magnetic actuators , open and closed loop control system kit , pid controller test bench , cro 150mhz and 100mhz and 70mhz and 50mhz , rs485 i o module , ethernet i o module , pneumatic trainer , hydraulic trainer , thermal conductivity apparatus, metal bar, electric heater, thermocouple , experimental set up for thermal conductivity of liquid , experimental set up for thermal conductivity of insulating material , composite wall apparatus , critical radius of insulating materials apparatus. , experimental up to for testing effectiveness of metallic fin pin fin apparatus , a metallic tube of diameter d 45mm and length l 450mm with a electrical heater coil along the axis of the tube , stefan boltzmanns apparatus , emissivity apparatus , critical heat flux up , batteries and fuel cells , hydrometer , capillary tube , red wood viscometer , beaker , pipette , electronic balance

CTN :41296112

06 Aug, 2025 NA

Gorakhpur - Haryana

Tender For supply, installation, testing & commissioning of as below- (a) mild steel angle clamp nut bolt size more than 10 inch nut type flex nut and connecting it to above overhead pole. - 280 kg (b) stay along with stay rod, stay bow, stay plate and thimble with alluminium cables for tighting and balancing of hole an d connecting the ground with it. - 05 nos (c) proclaim pin insulator of drawing no. rr/pn/11/07 highest volt age working capacity 11 kv creepage distance 230 mm visible discharge voltage (kv) 9 mechanical falling l oad (kn) 5 - 25 nos (d) brass made shackle insulator for overhead fencing voltage 12 v 50 hz - 25 nos (e) maintenance free earthing electrode 4 mtr. long made up of copper material outer dia 40 mm is 3043 and making of earth pit size 60x60 cm and connecting it well g.i. wire 6 swgi - 05 nos . (f) suspension of wires connecting it with clamps insulator and jointing the cables and dismantaling of overhead and transporting i t to consignee - 480 mtr. [ warranty period: 30 months after the date of delivery ]

CTN :41051224

06 Aug, 2025 20.00 Lacs

Lucknow - Uttar Pradesh

Tender For corrigendum : cartage of sealed sample material for purpose of quality testing at testing lab center cpri bhopal and erda vadodara.

CTN :41288635

11 Aug, 2025 NA

Bangalore - Karnataka

Tender For providing of selection of laboratories for testing of products/material - siolinvestigation and topographicalsurvery; as per scope of work; complete job; as per scope of work

Oil Testing Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector