Latest oil tray Tenders | Government oil tray Tenders

Central Government/Public Sector

CTN :45296046

12 Jun, 2026 NA

Balaghat - Madhya Pradesh

Tender For supply of rubber diaphragm 10c818r1 , rubber diapharam from front 10c803 , rubber diapharam small frame 10c804 , rubber oil seal 115idxod140x13 , fly wheel bush 3j9020 507 , hex bolt 1 5 lg and hex nut 1 1 x 5 30 x 20 , toggel pin 10c704 , toggle channel a 10c 715r6 , flow switch rang 2-12 lpm type hr20m1 , presure gauge 0 10kg cm2 range , rotary gear pump 10 lpm 10lpm , oil tray 3j9020 513 , shaft for lower body block 3j7550 205

CTN :45262184

01 Jun, 2026 NA

Bokaro - Jharkhand

Tender For supply of oil tray (q3)

State Government

CTN :45046874

08 May, 2026 12.36 Lacs

Multi City - Karnataka

Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

Central Government / Public Sector

CTN :45084415

21 May, 2026 NA

Tirupati - Andhra Pradesh

Tender For auction sale of others - cond linen items - 24526 kgs/24.526 mts- delivery on actual weightment basis. (two lots clubbed i.e.12962 kgs and 11564 kgs. total qty 24526 kgs/24.526 mts)1) lot no 5314 26 03 10 gtl tpty br ap available with sse c w tpty scrap condemned and un-serviceable condemned linen items consisting of ¿scrap condemned and un-serviceable condemned linen items consisting of ¿(1) white bed sheets ¿ 25800 nos ¿ 10062 kgs(2) polyvastra white bed sheets ¿ 800 nos ¿ 312 kgs(3) face towels ¿ 8020 nos ¿ 642 kgs; (4) pillow covers ¿ 17000 nos ¿ 1530 kgs ; (5) polyvastra pillow covers ¿ 1200 nos ¿ 108 kgs(6) bath towels ¿ 650 nos ¿ 176 kgs; (7) clady cloth ¿ 188 nos ¿ 132 kgs total qty ¿ 12962 kgs/12.962 mt (approx). available at tirupati, coaching depot office washing plant, tanapalli road. ds-8 no. 0531440057, 58, dt. 30.10.25. hsn code: 720429/gst 5%).2)lot no 5314 26 03 12 gtl tpty br ap available with sse c w tpty scrap condemned and un-serviceable condemned linen items consisting of ¿(1) white bed sheets ¿ 23000 nos ¿ 8970 kgs(2) polyvastra white bed sheets ¿ 1200 nos ¿ 468 kgs(3) bath towels ¿ 160 nos ¿ 43 kgs; (4) pillow covers handloom ¿ 19600 nos ¿ 1764 kgs ; (5) polyvastra pillow covers ¿ 1750 nos ¿ 158 kgs; (6) clady cloth ¿ 230 nos ¿ 161 kgs total qty ¿ 11564 kgs/11.564 mts (approx) (approx). available at tirupati, coaching depot office washing plant, tanapalli road. ds-8 no. 0531440066, 67 and 68, dt. 10.01.26. hsn code: 720429/gst 5%).note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side.4) gas/chisel cutting is permitted ,if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, if required is permitted only with the same type of lot present in the vicinity. 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality ,quantity description etc.10) as per scr hq letter no.s.289.scrap mgmt/24-25 dated 19.12.2024, partial delivery of the scrap lots is not allowed against partial payment of bsv. delivery order will be issued only after full payment of bsv

Central Government / Public Sector

CTN :45084408

21 May, 2026 NA

Gooty - Andhra Pradesh

Tender For auction sale of others - mixed ferrous scrap ¿ 50.000 mt-delivery on actual weighment basis. lot no. 5364 26 04 02 gtl gy mf ap. available with sse dsl gy. scrap, condemned, released, unserviceable mixed ferrous scrap consisting of :-1) pantograph stands & brackets 2) alco cylinder heads 3) coil springs 4) vertical & horizontal dampers 5) gear rings 6) cylinder liners 7) buffers 8) bull gears 9) pinions 10) tsc gear brackets 11) knuckles 12) connecting rod blade & fork type 13) auxiliary end dampers 14) hand brake units 15) in house made stands 16) tbu & pbu units 17) exhaust manifolds 18) cbc draft gears 19) radiator covers 20) air maze brackets 21) loco foot step 22) main bearings, total gross weight = 50000 kgs / 50.000 mts ( approx). available bin 3&8 in new scrap yard ,diesel loco shed gooty. ds-8 no. 536480002, dated 13.04.26. hsn code: 720429 - gst 18%. note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side. 4) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality, quantity description etc.

Central Government / Public Sector

CTN :45084416

21 May, 2026 NA

Guntakal - Andhra Pradesh

Tender For auction sale of others - mixed scrap - 80.000 mt- delivery on actual weighment basis only. lot no. 5321 25 04 61 gtl gtl mixed ap available with sse dsl gtl scrap cond. u/s beyond use mixed ferrous scrap (ms & ci). released assorted scrap consisting of 50 items: (1) cattle guard (2) cylinder heads (3) tm end shield (4) outer end liner bearing caps (5) knuckle (6) cbc (7) draft gears (8) side buffers (9) equalizing beams (10) compressor liners (11) compressor housing (12) water pump (13) lube oil pump (14) brake adjusters (15) screw coupling (16) gear cases (17) compressor heads (18) extension shafts (19) cam gears (20) extension gears (21) pulleys (22) cam shafts (23) sucs (24) pull rods (25) system pipe liners (26) cattle guard supporters (27) axle box distance pieces (28) horn box liners (29) brake hangers (30) fttm, rttm blowers (31) intermediate casings (32) after cooler housing (33) m6 turbo support (34) axle box covers and plates (35) fip supports (36) ms plates & angulars (37) carbody filters (38) ecc guards (39) cylinder head valves (40) push rods (41) derators (42) fasteners of different sizes of locomotive (43) ms plates (44) focus lights housing (45) other scrap items related to loco assorted scrap (46) centrifuge base (47) fuel oil headers (48) valve lever assembly (49) main bearing shells (50) connecting rods total qty: 80.000 mts (approx) as per ds-8. available at ferrous scrap yard , diesel loco shed, guntakal. ds-8 no: 053211050 dt.13.02.26. hsn code: 720429 - gst 18%. note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side. 4) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr. dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality, quantity description etc.

CTN :44884868

28 Apr, 2026 40.4 Thousand

Bathinda - Punjab

Tender For corrigendum : supply of wind shield glass of tata hmv 6x6 , air processing unit 10 bar of tata hmv 6x6 , spring assembly brake actuator of tata hmv 6x6 , bush king pin of tata 2.5 ton , bearing needle of tata 2.5 ton , oil tray in rear housing of tata 2.5 ton , glass assembly wind screen of scorpio , gasket 0.25 mm of tatra 815 , sealing ring of tatra 815 , shaft sealing of tatra 815 , taper roller bearing of tata 2.5 ton , oil seal of tata 2.5 ton

CTN :44915435

27 Apr, 2026 42.0 Thousand

Bathinda - Punjab

Tender For supply of wind shield glass of tata hmv 6x6 , air processing unit 10 bar of tata hmv 6x6 , spring assembly brake actuator type 24 of tata hmv 6x6 , spring assembly brake actuator type 30 of tata hmv 6x6 , bush king pin of tata 2.5 ton , bearing needle of tata 2.5 ton , oil tray in rear housing of tata 2.5 ton , glass assembly wind screen of scorpio , needle ball bearing of tatra 815 , gasket 0.25 mm of tatra 815 , sealing ring of tatra 815 , shaft sealing of tatra 815 , taper roller bearing of tata 2.5 ton , oil seal of tata 2.5 ton

Central Government / Public Sector

CTN :44892557

27 Apr, 2026 NA

Tirupati - Andhra Pradesh

Tender For auction sale of others - cond linen items -24526 kgs/24.526 mts mts- delivery on actual weightment basis. (two lots clubbed i.e.12962 kgs and 11564 kgs. total qty 24526 kgs/24.526 mts) 1) lot no 5314 26 03 12 gtl tpty br ap available with sse c w tpty scrap condemned and un-serviceable condemned linen items consisting of ¿ (1) white bed sheets ¿ 23000 nos ¿ 8970 kgs (2) polyvastra white bed sheets ¿ 1200 nos ¿ 468 kgs (3) bath towels ¿ 160 nos ¿ 43 kgs; (4) pillow covers handloom ¿ 19600 nos ¿ 1764 kgs ; (5) polyvastra pillow covers ¿ 1750 nos ¿ 158 kgs; (6) clady cloth ¿ 230 nos ¿ 161 kgs total qty ¿ 11564 kgs/11.564 mts (approx) (approx). available at tirupati, coaching depot office washing plant, tanapalli road. ds-8 no. 0531440066, 67 and 68, dt. 10.01.26. hsn code: 720429/gst 5%). 2)lot no 5314 26 03 10 gtl tpty br ap available with sse c w tpty scrap condemned and un-serviceable condemned linen items consisting of ¿ scrap condemned and un-serviceable condemned linen items consisting of ¿ (1) white bed sheets ¿ 25800 nos ¿ 10062 kgs (2) polyvastra white bed sheets ¿ 800 nos ¿ 312 kgs (3) face towels ¿ 8020 nos ¿ 642 kgs; (4) pillow covers ¿ 17000 nos ¿ 1530 kgs ; (5) polyvastra pillow covers ¿ 1200 nos ¿ 108 kgs (6) bath towels ¿ 650 nos ¿ 176 kgs; (7) clady cloth ¿ 188 nos ¿ 132 kgs total qty ¿ 12962 kgs/12.962 mt (approx). available at tirupati, coaching depot office washing plant, tanapalli road. ds-8 no. 0531440057, 58, dt. 30.10.25. hsn code: 720429/gst 5 %). note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side.4) gas/chisel cutting is permitted ,if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, if required is permitted only with the same type of lot present in the vicinity. 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality ,quantity description etc.10) as per scr hq letter no.s.289.scrap mgmt/24-25 dated 19.12.2024, partial delivery of the scrap lots is not allowed against partial payment of bsv. delivery order will be issued only after full payment of bsv.

Oil Tray Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector