Latest opacimeter Tenders | Government opacimeter Tenders

State Government

CTN :42813292

05 Dec, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ytps(5x800mw)-supply of t and p items required for stage-i and chp of ytps. - ac/dc volts (40hz to 500hz):4.000v, 40.00v, 400.0v, 1000v; resistance (ohms): 400.0 ohm, 4.000 kohm, 40.00 kohm, 400.0 kohm, 4.000 mohm, 40.00 mohm; capacitance: 40.00nf, 400.0nf, 4.000 µf, 40.00 µf, 400.0 µf, 1000 µf; ac/dc current: 4.000a, 10.00aac/dc millivolts: 400.0mv; diodetest: 2.000v;ip rating: ip40safety: iec 61010-1, iec 61010-2-030 cat iii 600v, cat ii 1000v, pollution degree 2.temperature: 50-400°c, 0-50°c, -55 to 0°c.temperature: operating: 0°c to 40°c;storage: -30°c to 60°celectromagnetic environment: iec 61326-1:portableincluded accessories: test leads with caps, thermocouple, temperature probe, 2 aa batteries, user manual along with the required calibration certificates.gds 18v-400 cordless impact wrench;battery voltage: 18v; torque max: 400nm; no load speed: 0-3,400 rpm. make: boschfluke true rms ac/dc digital clamp meter with iflex probe and fluke connect modelno: 376digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 voltsmegger, 1kvleakage current clampmeter ac, range (0-100a)portable hot air blowervacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hzvibration meter, digital, model: ird 306analog phase sequence indicator, 100 to 500 v, 25 to 65 hzdigital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms-200 kohmsplier, nose, 6"/150 mmhammer, 4 lbcutting plier, 12"39 , gds 18v-400 cordless impact wrench; battery voltage: 18v; maximum torque: 400 nm; no load speed: 0-3,400 rpm. make: bosch. , fluke true rms ac/dc digital clamp meter with iflex probe and fluke connect, model no: 376, , digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 volts, , megger, 1kv, , leakage current clamp meter ac, range (0-100a), , blower, portable hot air, , vacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hz, , vibration meter, digital, model: ird 306, , analog phase sequence indicator, 100 to 500 v, 25 to 65 hz, , digital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms–200 kohms, , plier, nose, 6"/150 mm, , hammer, 4 lb, , cutting plier, 12", , tape, measuring; length: 3 m; material: steel, , tape, 5 meters measuring tape, , tape, 30 meters measuring tape, , hole punch set 22, 20, 18, 16, 14, 12, 10, 8, 6, 4 set of 10 nos (tiger make), , center punch, length: 125 mm, , drilling machine, rated power input: 800w, 240v, drilling diameter in concrete with hammer drill bits: 4-26 mm, , digital motor checker: emc-38, , transformer, auto; type: manual operated variable; input voltage: 240 vac; output voltage range: 0-270 v ac; special features: (dimmerstat) with continuously variable banana terminals, capacity: 20 amps; model: 20d-1p, , transformer, auto; type: manual operated variable; input voltage: 415 v ac; output voltage range: 0-470 v ac; phase: 3; special features: 50 hz; model: 15d-3p, , lux meter, digital, 0-50,000 lux with silicon photodiode sensor, lcd display, dc 9v battery, mandatory accessories, , tachometer, digital; speed range: 9999/99999 rpm; model: v, , digital micro ohm meter, model dmo-100d, , gun, laser, , specifications:, , laser convergence distance: 50" (127cm) ir range: -58 to 3992°f (-50 to 2200°c) emissivity: 0.10 to 1.00 adjustable, , max resolution: 0.1°f/°c, , field of view (distance to target): 50:1

Central Government/Public Sector

CTN :42998287

11 Dec, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of laser distance meter (q3)

State Government

CTN :42815482

04 Dec, 2025 80.00 Lacs

Gwalior - Madhya Pradesh

Tender For rate contract for empanelment of agencies for supply of local purchase items under juridiction of general manager (city circle) mpmkvvcl, gwalior - trip coil suitable for cgl make vcb without assembly, trip coil suitable for schneider make vcb without assembly, trip coil shunt type 30 volt dc suitable for s&s make vcb without assembly, trip coil , shunt type 30 volt dc suitable for bhel make vcb without assembly, trip coil makes shreem with out assembly, trip coil suitable for erl make vcb without assembly, tripping coil 30 volt dc suitable for 11 kv areva/alstom make vcb, crompton make tripping coil with plunger, tripping coil s&s make 11kv vcb with coller, bhel make tripping coil (10 nos. with plunger), trip coil with plunger for shreem make vcbs, closing coil 30 volt dc suitable for 11 kv bhel make vcb, 11 kv closing coil 3 with assembly suitable for stelmec make vcb., closing coil 30 volt dc suitable for 11 kv crompton make vcb, 11 kv erl make closing coil, closing coil suitable for schneider make vcb without assembly, bhel make closing coil with plunger), schneider closing coil with plunger, expulsion fuse 30 amp, expulsion fuse for 11 kv 121 kvar capacitor unit-40 amp. (t-40), breather with blue silica gel (blue) 2 to 4 mesh for ptr, capacity 3.00 kg, ct clamp with threading in brass bushess 16 mm on 80x45x35 mm. for dog cond. (ct clamp with 35 to 40 mm with threading in brass bushess 16 mm on aluminium portion 80x45x35 mm with 04 nos. gi nut volt suitable for dog conductor), ct clamp with threading in brass bushess 20 mm on 80x45x35 mm .for dog cond. (ct clamp with 35 to 40 mm with threading in brass bushess 20 mm on aluminium portion 80x45x35 mm with 04 nos. gi nut volt suitable for dog conductor), indicating lamp 30 volt dc, tnc switch, digital tong tester (0 to 1000 amp.), bucholz relay for ptr, minimum oil gauge (mog) contacts, brass stud 20 dia suitable for 11 kv bushing, brass stud 20 dia suitable for 33 kv bushing, bi-metallic clamps suitable for 20mm dia stud and 100sqmm aaac, rubberized cork ( gasket) sheet 5 mm, rubberized cork ( gasket) sheet 9 mm, oil temperature indicator (oti), dial 150mm, with capilary, mercury swicth type, winding temperature indicator dial 150mm with capillary, mercury switch type, pad clamp for isolator suitable for panther conductor. ( alluminium pad clamp suitable for dog conductor, bottom portion of pad clamp should be 140x50x15 mm having 06 nos. g.i. nut and bolt for hole size 10 mm and upper portion otf pad clamp should be 70x50x15 mm having 02 nos. g.i. nut and bolt with spring washer for whole size 12mm total weight of a clamp should be 675 gram., rubber conical grommet 12mm for hv bushing., rubber conical grommet 12mm for lv bushing., ladder bamboo 8 to 10 meter (bamboo ladder 24 feet long heaving 2 inch to 3 inch dia at bottom & 1.5 inch to 2.5 inch dia at top of the bamboo, the cross pieces 16 no. i.e. step should be at distance of 16 inch & bamboo ladder should be tightended with gi wire of 16 swg at least four places. the top of ladder should be wide 35 to 40 cms and bottom 58 to 60 cms.), 11kv do fuse unit porceline type, hrc fuse base 100 amp, hrc fuse base 200 amp, hrc fuse base 315 amp, tc fuse wire 8 swg, tc fuse wire 14 swg, al. lugs for 70 sqmm cable. (weight 15 gram approx. +/- 5%), al. lugs for 150 sqmm cable (weight 38 gram approx. +/- 5%), aluminium lugs 95 sqmm (weight 18 gram approx. +/- 5%), aluminium lugs 120 sqmm (weight 20 gram approx. +/- 5%), alluminium lugs suitable for 150 sq. mm.make :-dowell s/action/sharp or any other equivalent make, alluminium lugs suitable for 300 sq. mm.make :-dowell s/action/sharp or any other equivalent make, 11kv vacuum interrupter suitable for stelmec vcbs, vacuum interrupter (bottle) suitable for 11 kv schneider make vcb, screw driver insulated plastic/pvc handle 250mm /10inch, plier combination side cutting 200mm /8 inch (insulated combination plier with joint cutter red color, make- taparia, size 200-210 mm

State Government

CTN :42718791

04 Dec, 2025 70.00 Lacs

Sheopur - Madhya Pradesh

Tender For rate contract award for supply of local purchase items for operation and maintenance of various equipment and various safety material for onm divisions and stm stc division situated under general manager (o n m) mpmkvvcl circle sheopur. - rate contract award for purchase of various electrical equipment/goods, trip coil shunt 30 volt dc suitable for 33 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 33 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make shreem, trip coil shunt 30 volt dc suitable for 11 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make - bhel, trip coil shunt 30 volt dc suitable for 11 kv vcb make erl, trip coil shunt 30 volt dc suitable for 11 kv vcb make alstrem, trip coil shunt 30 volt dc suitable for 11 kv vcb make schenider, trip coil shunt 30 volt dc suitable for 11 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 11 kv vcb make c&s, trip coil shunt 30 volt dc suitable for 11 kv vcb make - s&s, closing coil shunt 30 volt dc suitable for bhel make vcb, closing coil shunt 30 volt dc suitable for crompton make vcb, closing coil shunt 30 volt dc suitable for essun make vcb, closing coil shunt 30 volt dc suitable for megawin make vcb, closing coil shunt 30 volt dc suitable for stelmec make vcb, closing coil shunt 30 volt dc suitable for areva make vcb, expulsion fuse 40 amp. (t-40) for capacitor bank, expulsion fuse 60 amp. (t-60) for capacitor bank, digital clamp meter tong tester (0-750 volt ac 1000 amp. ac) make- mexo/motwane, megnatic oil gauge for power transformer (mog) 6 inc dia with lead, spring charging motor suitable for 11 kv vcb make-bhel, spring charging motor suitable for 11 kv vcb make - crompton, mfm suitable for control panel of all makes., selector switch suitable for control panel of all makes., buchholz relay(gas & oil operated) (is 3637) flenge-6 inch, gi nut bolt assorted size, tool kit with box specification having per kit 1-de spanner set of 10 pieces no. 6x7 to 24x27 2-ring spanner set of 10 pieces no. 6x7 to 24x27 3- cutting pliers (8 ) 01 no 4-nose pliers (6 ) 01 no 5-pipe wrench adjustable (12 ) 01 no. 6-hammer 01 no. 7-hexa with blade 01 no. 8-screw driver (06 ) 01 no. 9-screw driver (08 ) 01 no. 10-screw driver (10 ) 01 no 11-screw driver (12 ) 01 no 12-wrench pana 13-chisel 01 no make tapariya/venus, 11 kv insulated pull rod suitable for bhel make vcb with copper shunt, piercing connector type i for single phase/three phase suitable for 70-150 sq mm cable, raincoat(rubberisied) with cap make duckback, bamboo ladders 24 (feet) long approx having 2 to 3 dia at the bottom and 1.5 to 2.5 at top of bamboo the cross piece i.e. 16 no. step should be at a distance of approx 17 and bamboo ladder should be tightened with g.i. wire of 16 swg at least 4 places the top of ladder should be wide 35 to 40 cm and bottom 58 to 60 cm, silica gel (blue)2 to 4 mesh, breather with silica gel (blue) 2 to 4 mesh for power transformer capacity 5 kg, poly propylene rope 24mm dia make tuff rope/equivalent standered make with isi mark., smart connector suitable for m-16 ct tetminal to dog/raccoon suitable for ai alloy, cb smart clamp for dog/raccoon and panthor conductor, 30 volt dc led type indicating lamp of green/red/yellow colour, breaker control on/off switch handle type suitable for control panel make-recon/kaycee/any standard, lv brass stud complete made of brass stud with its all accessories for 200/315 kva distn. transformer one set for brass stud 300 amp shall comarion of brass stud 265x20 mm 01 no. brass hexa nut full thred-01 no., brass lock nut-02 no., brass rear nut-02no. sealing ball washer -01 (neoprene rubber washer) & brass plain whaser-02 no approximate weight 1050 gram -+5% tollarence., lv brass stud suitable for 25/63/100 kva x-mer length of rod 200mm dia 12mm, both & therder up 60 mm heaving chuck out washer & bass washer with 05 no. nut approximate weight 320 gram -+5% tollarence, 33 kv bushing

State Government

CTN :42723732

02 Dec, 2025 80.00 Lacs

Gwalior - Madhya Pradesh

Tender For rate contract for empanelment of agencies for supply of local purchase items under o&m circle gwalior.general manager (o&m circle)gwalior - items list 1, trip coil suitable for cgl make vcb without assembly, trip coil suitable for schneider make vcb without assembly, trip coil shunt type 30 volt dc suitable for s&s make vcb without assembly, trip coil , shunt type 30 volt dc suitable for bhel make vcb without assembly, trip coil makes shreem with out assembly, trip coil suitable for erl make vcb without assembly, tripping coil 30 volt dc suitable for 11 kv areva/alstom make vcb, crompton make tripping coil with plunger, tripping coil s&s make 11kv vcb with coller, bhel make tripping coil (10 nos. with plunger), trip coil with plunger for shreem make vcbs, closing coil 30 volt dc suitable for 11 kv bhel make vcb, 11 kv closing coil 3 with assembly suitable for stelmec make vcb., closing coil 30 volt dc suitable for 11 kv crompton make vcb, 11 kv erl make closing coil, closing coil suitable for schneider make vcb without assembly, bhel make closing coil with plunger), schneider closing coil with plunger, expulsion fuse 30 amp, expulsion fuse for 11 kv 121 kvar capacitor unit-40 amp. (t-40), breather with blue silica gel (blue) 2 to 4 mesh for ptr, capacity 3.00 kg, ct clamp with threading in brass bushess 16 mm on 80x45x35 mm. for dog cond. (ct clamp with 35 to 40 mm with threading in brass bushess 16 mm on aluminium portion 80x45x35 mm with 04 nos. gi nut volt suitable for dog conductor), ct clamp with threading in brass bushess 20 mm on 80x45x35 mm .for dog cond. (ct clamp with 35 to 40 mm with threading in brass bushess 20 mm on aluminium portion 80x45x35 mm with 04 nos. gi nut volt suitable for dog conductor), indicating lamp 30 volt dc, tnc switch, digital tong tester (0 to 1000 amp.), bucholz relay for ptr, minimum oil gauge (mog) contacts, brass stud 20 dia suitable for 11 kv bushing, brass stud 20 dia suitable for 33 kv bushing, bi-metallic clamps suitable for 20mm dia stud and 100sqmm aaac, rubberized cork ( gasket) sheet 5 mm, rubberized cork ( gasket) sheet 9 mm, oil temperature indicator (oti), dial 150mm, with capilary, mercury swicth type, winding temperature indicator dial 150mm with capillary, mercury switch type, pad clamp for isolator suitable for panther conductor. ( alluminium pad clamp suitable for dog conductor, bottom portion of pad clamp should be 140x50x15 mm having 06 nos. g.i. nut and bolt for hole size 10 mm and upper portion otf pad clamp should be 70x50x15 mm having 02 nos. g.i. nut and bolt with spring washer for whole size 12mm total weight of a clamp should be 675 gram., rubber conical grommet 12mm for hv bushing., rubber conical grommet 12mm for lv bushing., ladder bamboo 8 to 10 meter (bamboo ladder 24 feet long heaving 2 inch to 3 inch dia at bottom & 1.5 inch to 2.5 inch dia at top of the bamboo, the cross pieces 16 no. i.e. step should be at distance of 16 inch & bamboo ladder should be tightended with gi wire of 16 swg at least four places. the top of ladder should be wide 35 to 40 cms and bottom 58 to 60 cms.), 11kv do fuse unit porceline type, hrc fuse base 100 amp, hrc fuse base 200 amp, hrc fuse base 315 amp, tc fuse wire 8 swg, tc fuse wire 14 swg, al. lugs for 70 sqmm cable. (weight 15 gram approx. +/- 5%), al. lugs for 150 sqmm cable (weight 38 gram approx. +/- 5%), aluminium lugs 95 sqmm (weight 18 gram approx. +/- 5%), aluminium lugs 120 sqmm (weight 20 gram approx. +/- 5%), 11kv vacuum interrupter suitable for stelmec vcbs, vacuum interrupter (bottle) suitable for 11 kv schneider make vcb, screw driver insulated plastic/pvc handle 250mm /10inch, plier combination side cutting 200mm /8 inch (insulated combination plier with joint cutter red color, make- taparia, size 200-210 mm/8 inch modal-1621/8), tester neon bulb/pencil/screw driver type etc (make-taparia), metallic diode for battery charger, trip lever assembly for 11kv cgl vcb, m - seal epoxy compound,

corporations/Associations/Others

CTN :42932883

15 Dec, 2025 NA

Gurdaspur - Punjab

Tender For quotations for procurement of t&p items rope 22mm (30kg) , rope 24mm (30kg) , rope 20mm (28kg) , rope 16mm (20kg) , salings 17mm (1.5 meter) , binocular bushnell falcon 10x50 or equivalent. , 10x magnification, 50-millimeter lens diameter, auto focusing porro prism, 25-feet close focusing distance, abrasion-resistant finish. , emergency portable search light fos make or equivalent. , rechargeable battery, 15w, 1500 lumens (1km range), 6000 mah lion battery, 5-6 hours backup. , chainsaw (petrol) 22" (bar length) with accessories neptune make or equivalent. 2 stroke 3.5 hp engine 62cc, tank capacity 0.55 l , portable battery operated cutter with spare battery and charger of dewalt make or equivalent. speed 9000rpm, cordless brushed grinder, 20v2ah battery, wheel size 22mm, power 1000 w. , t&p kit of venus make or equivalent containing following items :- , double ended spanner set 6 mm to 32 mm(1 set) 1. , ring spanner set 6 mm to 32 mm (1 set) 2. , goti set 10 mm to 32 mm complete with handle, ratchet & extension pics (1 set) 3. , 4. screw set pye 1no. , 5. pipe wrench 14 inch (1 no.) , 6. hammer kg (1 no). , 7 pliar (1 no). , come along clamp panther , steel rope come along clamp , aluminium extension ladder upto 20 ft.

Central Government/Public Sector

CTN :42951736

08 Dec, 2025 NA

Erode - Tamil Nadu

Tender For supply of laser distance meter

State Government

CTN :42920788

16 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply and execution of various signalling equipments as per boq attached inspection rites consignee - fabrication and supply of point rodding (ground connection) set with insulation complete set for electric point machine 220 mm stroke clamp type for thick web switches as per rdso drg no rds0/s/3454 alt -a ver-1 or latest. (inspection agency:- rites), supply and fixing of gi bend pipe 50 mm dia., bclass, for cable entry into point machine with all accessories. note: th is item to be operated independently for those points where point machines are functional, but gi bend pipe is not provided. for all other new installation of point machines, item 06002 of the sor includes the provision of gi bend pipe. (inspection agency:- consignee), supply of point machine ground connection insulation complete set including for p bracket insulation for point machine irs type 220 mm.(inspection agency:- rites), supply of stretcher bar insulation complete set for point machine irs type 220 mm stroke clamp type.(inspection agency: - consignee)., supply of track lead junction boxes fiber glass as per drg.no. cwm - 00597 of f.r.p material to irs.s.23 specification along with fixtures i.e., on ms angle 50x50x5mm, 0.9 meters long two numbers of g.i. pipes of 25mm dia. along with nuts and bolts and 500mm long (this includes gromite bushes, 60mm pbt terminal). (inspection agency:- consignee), supply of aluminium ladders of height 5 feet for maintainer at relay room and ips room of model no: 8226 of youngman, plantex or similar. (inspection agency: - consignee)., supply of lps 3.00 mm thick rolled copper strip of reputed branded make. (inspection agency: - consignee), supply of insulation resistance tester. make fluke 1507 or similar. (inspection agency:- consignee), supply, fabrication and fixing of the calling on board/bslb board as per rdso drg. no. sa 2373 (adv)/stop/warning board as per drg. no. sa-2380 (adv), or as applicable, on concrete foundation and painting with retro reflective paint. all work to be carried out as per railway site engineer instructions.(inspection agency:- consignee), supply, fabrication and fixing of retro reflective signal number plates as per ncr drg. no. typ/14/0014 dtd 28.11.2014 issued vide ncr letter no. s&t/ ncr/drg/typ dated 28.11.2014, on signal post with contractors own material like clamp, u bolts, nuts etc.(inspection agency:- consignee), supply of digital cable fault locator for metallic s&t cables of reputed make as per tec spn no. gr/tie-05/03, july 2006 & tec 73060:2006 like khushicomms model venus 120 orsimilar branded make. consignee shall approve the supply only after successful demonstration at site(inspection agency:- rites), supply and testing of cable route tracer and marker locator model and make 3m dynatel model locator 2273m or reputed branded make.(inspection agency:- rites), supply, installation and commissioning of central gateway. note: single centre gateway shall cater maximum up to 32 data transmitter node (modbus).(as per annexure a) (inspection agency:- rites), supply, installation, testing and commissioning of data transmitter node in location box. modbus type note: maximum range 400 meter. (as per annexure b) (inspection agency: - rites), supply, installation , testing and commissioning of data transmiter modbus cum repeater for augmenting range of ourdoor data transmiter node (modbus), where distance of location box is more than 400 meter with respect to central gateway.(as per annexure c) (inspection agency:- consignee), apparatus case led indication status display unit cum allarm system for yard.single display system shall cater to maximum 45 no of location boxes.(as per annexure d)(inspection agency:- consignee), fabrication, supply and fixing of p, c, a, g, ibs etc. marker disk painted and lettered with enamelled paint of approved colours, on signals, conforming to rdso drg. no.sa - 23456, as per standard practice and technical specifications.(inspection agency:- consig

Central Government/Public Sector

CTN :42921954

08 Dec, 2025 NA

Erode - Tamil Nadu

Tender For supply of laser distance meter

Central Government And Public Sector

CTN :42884913

13 Dec, 2025 4.94 Lacs

Thrissur - Kerala

Tender For supply of ei rearrangement work in thrissur ba c c - supplying and fixing of vertical type, mcb distribution board , supplying and fixing 5 a to 32 a rating, mcb single pole , supplying and fixing 5 a to 32 a rating, mcb tripple pole , supplying and fixing 4 pole 63 amps isolator , supplying and fixing of pvc conduit 20 mm , supplying and fixing of pvc conduit 25 mm , supplying and drawing of frls copper cable 3x1. 5 sq. mm , supplying and drawing of frls copper cable 3x2. 5 sq. mm , supplying and drawing of frls copper cable 3x4 sq. mm , supplying and drawing of frls copper cable 3x 6 sq. mm , supplying and making end termination with brass compression gland 3 . 5 x 25 sq. mm , supplying and making end termination with brass compression gland 3. 5 x 35 sq. mm , supplying and making end termination with brass compression gland 3. 5 x 50 sq. mm , providing and fixing 6 swg dia g. l. wire , wiring for light point, fan point, exhaust fan point, call bell point with 1. 5 sq. mm copper conductor cable group c , supplying and fixing modular switch socket 5, 6 a switch , supplying and fixing modular switch socket 3 pin 5, 6 a socket outlet , supplying and fixing modular switch, socket 15, 16 a switch , supplying and fixing modular switch socket 6 pin 15, 16 a socket outlet , supplying and fixing modules, gl box 3 module 100mmx75mm , supplying and making end termination with brass compression gland 2 x 1. 5 sq. mm , dismantling of pvc insulated and pvc sheathed xlpe power cable up to 6 sq. mm , dismantling pvc insulated and pvc sheathed xlpe power cable above 6 sqmm up to 35 sq. mm , dismantling of pvc insulated and pvc sheathed xlpe power cable above 35 sq. mm and up to 95 sq. mm , relaying and refixing of pvc insulated and pvc sheathed xlpe power cable up to 6 sq. mm , relaying and refixing of pvc insulated and pvc sheathed xlpe power cable above 6 sqmm up to 35 sq. mm , relaying and refixing of pvc ) /bid number: gem/2025/b/6920941 * /dated: 22-11-2025 & & / bid document1 / 44insulated and pvc sheathed xlpe power cable above 35 sq. mm and up to 95 sq. mm , supply and fixing of pedestal mounting type kseb energy meter board , supplying and drawing 25 sqmm abc aluminium weather proof cable , dismantling 125 amps capacity 4 pole on load change over switch with ms enclosure , dismantling the existing afd panel repeater panels , dismantling the existing old 125amps capacity lt panel , dismantling the existing sc meter panel , dismantling the existing tpn mcb db , dismantling smoke detectors or mcp or hooter ri etc with accessories , dismantling the existing life expired un servceable ac stabilser panel , reinstalling the existing 125 a ,4 pole on load change over switch , reinstalling the existing afd panel , reinstalling the existing kseb service connection meter panel , reinstalling the existing tpn mcb db , dismantling electrical wiring in metal pvc conduits for ac units, wirings , dismantling electrical wiring in metal pvc conduits for ei light power plugs , relaying existing electrical wiring in metal pvc conduits , transportation of the dismantled electrical installation accessories within 15km distance , rearranging isolating the existing terminations , supply and fixing 63 amps capacity 4 way connector , supply installation, testing and commissioning of pre-wired, bulk head light fitting , supplying and fixing of 63 amps capacity 4 pole on load change over switch , supply and fixing 2 inch dia rigid pvc pipe , supply and fixing suitable pvc coated gi stay wire , providing frame work with 40 mm x 40 mm x 5 mm ms angle iron , providing frame work with 25 x 25 x 3 mm thick ms angle iron , providing frame work with 40 mm x 5 mm ms flat iron , providing frame work with 1 mm thick coated trafford gi sheet , supply and fixing 63 amps 4 pole onload change over switch

Opacimeter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors