Latest optic cable Tenders | Government optic cable Tenders

Central Government/Public Sector

CTN :45737080

20 Jul, 2026 NA

Ambala - Haryana

Tender For supply of thermoshrink jointing kit for jointing underground 0.9 mm dia. conductor 4/6 quad cable as per specification no. irs:tc:77-2012(rev.-3) [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :44247372

06 Jul, 2026 NA

Surendranagar - Gujarat

Tender For corrigendum : supply and apply of ht/lt cable jointing kit at surendranagarpumping station.

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

CTN :43123526

02 Jul, 2026 NA

Allahabad - Uttar Pradesh

Tender For bid to ras supply of procurement and digging of jfc cable d d - 100 pair jfc dia 0. 5mm unarmoured , 50 pair jfc dia 0. 5mm unarmoured , 20 pair jfc dia 0. 5mm unarmoured , jointing kit 100 pair , jointing kit 50 pair , jointing kit 20 pair , pillar box 500 pair with krone , pillar box 400 pair with krone , pillar box 100 pair with krone , dp box 100 pair , dp box 50 pair , dp box 20 pair , rcc route marker , gi pipe 2 inches , 100 pair krone module frame , 50 pair krone module frame , 20 pair krone module frame , 10 pair krone module frame , fxo fxs optical , joint indicators , e1 to eth converter , nfs compatible analog sip phone , nfs compatible video sip phone , nfs compatible audio sip phone , digging and laying of jfc

CTN :45713130

07 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of supply laying testing and commissioning ug cable xlpe , material and labour for cable jointing kit end joint for 11 kv , excavating in trenches in hard dense soft soil n exc 1.5 m wide , removing excavated material to a distance not exceeding 50 mtr , returing filling in including spreading levelling watering , material and labour for sand cushioning 8 cm before laying ht lt , material and labour for un- reinforced precast concrete cable , supply and fixing pin type porcelain vitreous white , supply and fixing disc type insulator porcelain vitreous , taking down and supply and fixing acsr conductor , material and labour for earth continuity conductor

CTN :45713191

07 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of removing the existing compact sub stn , taking out and transporting defective css , servicing of rmu 11kv model of c and s make , supply and fixing in replacement of vaccum , supply and fixing of digital amp meter , supply and fixing of digital volt meter , supply and fixing in replacement indicator lamp , supply and fixing in replacement 11kv , opening up the top cover of the transformer , supply and fixing in replacement ht coils , supply and replacement of lt coils , supply and fixing in replacement of gasket , supply and fixing in replacement of lt porcelain , supply and fixing in replacement of ht 11 kv , supply and fixing new transformer oil , filtration dehydration of transformer oil , supply and fixing in replacement of supply testing , exacavation for cables loops near the poles , material and labour for repairing existing lt panel , material and labour for preparing old painted , servicing of acb model 2013 , supply and fixing of shunt coil assemply , supply and fixing of spring charging motor , supply and fixing in replacement of mccb 250 amps , supply and fixing in replacement of mccb 160 amps , cable jointing kit for 11 kv

CTN :45743856

08 Jul, 2026 NA

Gurgaon - Haryana

Tender For supply of o.f.c. jointing kit for 24 fiber cable 9mm core dia with suitable heat shrink sleeves as per rdso spec np. rdso/spn/tc/68/2014 or latest [ warranty period: 30 months after the date of delivery ] ]

CTN :45642888

03 Jul, 2026 50.47 Lacs

Purnia - Bihar

Tender For corrigendum : supply of , frl 1 or 4 inch with pressure guage , quick exhaust valve 1 or 4 festo or norgen , quick exhaust valve 1 or 8 festo or norgen , spray,wd-40 cap- 400ml btl , cassette ss as per kosan carousel , guide rod for kosan introduction unit , 5 or 2 spring return valve , 1 or 2inch -f, ss ball valve , magnetic sensor , tepar strip for 90 deg bend , lock pin,chain conveyor duplex chain , switch,139a714,carousel kosncris - pressure switch , ejection puller arm , ejection pusher arm , needle valve , pneumatic cylinder 12mm or 16mm with fittings , shaft size- 40mm x 280 mm en-8 , shaft size- 40mm x 4000 mm en-8 , nut bolt 1.5inch x 10mm , nut bolt 1inch x10mm , f-mounting , ejection flexible coupling , pneumatic cylinder- 50 or 160- norgen or smc , toggle joint rod- lt-200 mm , pin of non-pneumatic filling gun , bearing no.6206 , bearing no.6304 , gas stop valve lpg 1 or 2inch , steel plate thick 10mm size 0.5mx0.5m , key pad for cuc card steel mk1v , key pad for cuc card mkii , anchor fastener length150mm dia 10mm gi , anchor fastener length150mm dia 12mm gi , anchor fastener length150mm dia 16mm gi , nut bolt length 1inch dia 6 mm , counter bolt 8mm, allenkey type, with lock nut , eye bolt for centering arm , spring,159a533,kosncris pt head , ss rod of gd or pt base , ss block of gd or pt base , linear bearing , optical cable for bar code sensor , automatic hot air sealing head , pneumatic cylinder size 500mmx50 norgan , 50 dia sealkit norgren , 50 dia sealkit janatics , solenoid coil for kosan filling scale- smc make , lpg hose of length 1 m , lpg hose of length 1.5 m , lpg hose of length 0.5 m , pencil sensor , rivet type conveyor chain , rod of kosan filling gun pneumatic type , kosan filling gun cup , dampner or kosan filling gun bush , kosan filling scale leg , lower bell for gd , vibration absorber for gd head , kosan fintec load cell for filling scale 200kg , load cell for jisl adjustment scale 650 kg , manual cvt head,kpot0122 carousel,kosncr , lifter plate for check scale , c channel of conveyor , telescopic boom pipe length 6m dia 1.5inch , drag chain , boom e plate with taflon ss thickness-10mm 1mx1m with taflon 12mm , mark iv display , reflector for kosan carousel , lpg filling gun pneumatic type , pneumatic counter , vacuum or suction indicator

CTN :45720567

20 Jul, 2026 3.80 Lacs

Gwalior - Madhya Pradesh

Tender For supply of cable, cable jointing kit with installation testing & commissioning work - supply of cable, cable jointing kit with installation testing & commissioning work, 33 kva 400 sqmm ht cable, 33 kva 400 sqmm ht cable jointing kit, 33 kva ht cable transport, jointing & fixing labour charge

CTN :45718565

09 Jul, 2026 NA

Allahabad - Uttar Pradesh

Tender For supply of changeover four pole 100 amps h d , capacitor 3 point 15 mfd , switch piano modular type 5 amp , desert cooler fan motor 1400rpm with fan blade , power contractor ml 3 with 2 no 2 nc , copper lugs heavy duty long barrel 95 sqmm , on change over 200 amp 4pole 415 volts , gun metal gate valve 20 mm bore , capacitor 2 point 5 mfd , gun metal gate valve 15 mm bore , mcb tp 100 amp , cable jointing kit for 11 kv earthed indoor terminate 3 core heat shrinkable xlpe of size 120 sqmm to 185 sqmm , cable jointing kit for 11 kv earthed outdoor terminate 3 core heat shrinkable xlpe of size 120 sqmm to 185 sqmm , copper lugs 35 sqmm , mcb tpn 100amp 4 pole , power contactors 240 volts , pvc adhesive tape 25mm 25 mtr long , alluminium lugs heavy duty long barrel 35 sqmm , wood wool pad for desert cooler , gi nipple 20x75mm long , alluminium lugs heavy duty long barrel 25 sqmm , pvc insulation tape 9 10m 20mm , pvc adhesive tape 20mm 25 mtr long , mcb 160 amp , gi tee equal 20mm dia isi marked , batton holder , gi elbow 20mm dia isi marked , gi union 25mm , power contractor ml 4 with 2 no 2 nc , gi union 20mm , alluminium lugs heavy duty long barrel 95 sqmm , gi union 50 mm , ac starter unit comprising 25 amp mcb , pvc tape 20mm 15 mtr long , alluminium lugs heavy duty long barrel 70 sqmm , copper lugs heavy duty long barrel 10 sqmm , water lifting pump for desert cooler , gun metal gate valve 25 mm bore , alluminium lugs heavy duty long barrel 120 sqmm , starting capacitor 100 to 120 mfd , holder angle bkl , candle bulb 40w , led 0.5 watt lamp colorful red green , gi plug 20mm dia , running capacitor 40 to 60 mtd , al lugs heavy duty long barrel 25 sqm , washer nut and bolt size 2x2mm thick as per sample , running capacitor 4 mtd , electrical tape ht scotch 23 of width 19mm 25mtr length , cable jointing kit cold shrinkable straight through of cable size 120 sqmm 3 core 11kv ht , electrical tape ht scotch 23 of width 38mm 25mtr length , cable jointing kit cold shrinkable outdoor of cable size120sqmm 3core 11kv , electrical tape ht scotch 23 of width 25mm 25mtr length , cable jointing kit cold shrinkable outdoor of cable size 95 sqmm 3core 11kv , cable jointing kit cold shrinkable straight through of cable size 95 sqmm 3 core 11kv ht , sheet metal enclosure with plug top and mcb sp 20a, , cable jointing kit cold shrinkable indoor of cable size 70 se 120sqmm 3 point 5 core , thermostat for geyser 25 ltr , cable jointing kit cold shrinkable indoor of cable size 150 oblique 240sqmm 3 point 5 core , cable jointing kit cold shrinkable indoor of cable size 25 oblique 50 sqmm 3 point 5 core. , cable jointing kit cold shrinkable outdoor of cable size 150 oblique 240 sqmm 3 point 5 4 core. , cable jointing kit cold shrinkable outdoor of cable size 16 oblique 50 sqmm 3 point 5 4 core , gi tubing 40mm bore med grade , gi tubing 50mm bore med grade , cable jointing kit cold shrinkable indoor of cable size 300 oblique 400sqmm 3 point 5 core. , gi tubing 25mm bore med grade , capacitor 2 point 5 mfd 230 v , cable jointing kit cold shrinkable outdoor of cable size 70-120 sqmm 3 point 5 4 core , electrical tape ht scotch 23 of width 50mm 25mtr length , sluice valve isi marked pn 1 point 6 brass spindle with hand wheel 100mm , sluice valve isi marked pn 1 point 6 brass spindle with hand wheel 80mm. , led bulb 7 watts 230 v , sluice valve isi marked pn 1 point 6 brass spindle with hand wheel 150mm , non return valve isi marked pn 1 point 6 150mm , gm gate valve isi marked pn 1 point 6 50mm , led down lighter 6w , aluminium cable lugs long //bid details 2 / 126 barrel bolt hole size 240 sqmm cable , heating element 1500 watt triangular type , gi tubing 20mm bore med grade , non return valve isi marked pn 1 point 6 100mm , aluminium cable lugs long barrel bolt hole size 120 sqmm cable , aluminium cable lugs long barrel bolt hole size 25 sqmm cable , led lamp bulb holder batten type bakelite , aluminium cable lugs long barrel bolt hole size 50 sqmm cab

Optic Cable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector