Tender For bid to ras supply of flexible copper trailing cables d d - item 10 , item 20 , item 30 , item 40 , item 50 , item 60 cable,trg,atc,3.3kv gr,3.5cx50mm2,is9968 size & tvpe 3.5cx50 sq. mm 3.3 kv grade flexible atc conductor of class-s, epr le-3, insulated &black hofr nbr pvc type se-4 sheathed flexible trailing cable suitable for reeling/un-reeling operation. cable type- flexible, standard: is 9968(part 2) 2002 d.c. resistance at 20deg. c (ohms/km) power core max- 0.393 earth core max - 0.795. annealing test in %- (before stranding) 13.5 %. per sulphate test in g/m2- max. 5.00. conductor screeninq power core only material approx thickness mm - extruded semiconducting compound/ extruded semi conducting tape- 0.80. conductor material: annealed tinned copper, 6.6 klv grade, cable type: flexible, standard: is 9968(part 2) 2002 tests on insulation thickness (nom) mm core ldentification - power core-2.20 colour rpct red, yellow & blue for power cores & green for earth core tensile strength before ageing n/mm2- min.4.20 % variation after ageing (air oven)- max. +-30% % variation after ageing in (air-bb)- max. +- 30%. elongation before ageing in % - min.200% % variation after ageing (air oven)- max. +- 30% % variation after ageing in (air-bb)- max. +- 30%. hot set test hot set elongation- 175% permanent set 15%. lnsulation resistance constant (min.) m ohm km. at 27deg.c- min. 3670 at 90 deg.c-min 3.67. thick of lnner sheath min 2.00 mm. rein forcement- open braid of textile material physical test on outer sheath thickness (nom) / min mm- 3.50/ 2.60 colour black, over all diameter of cable mm- 52.00+-3.00. tensile strength ) /bid number : gem/2025/b/6811700 * /dated: 24-10-2025 & & / bid document 1 / 22 before ageing n/mm2 - min. 11.0 at 2oo elongation 4n/ sq. mm. % variation after ageing in (air-bb)-max. +- 50% elongation before ageing in %- min.250% % variation after ageing in (air-bb)- max. + 50%. hot set test hot set elongation- max.175% permanent set- max 15. oil resistance test variation in % in tensile strength- max. +-40% variation in % in elongation-max. +-40%. tear resistance in n/mm - min.5.0. flammability test period of burning after removal of flame- max. 60 sec. min unaffected portion from the lower edge of the top clamp - min 50 mm. test high voltage at room temp- 10 kv ac for 4 hours. water absorption test increase in capacitance 1 to 14 days max- 6% 7 to 14 days max- 2.5%., control trailing cable 12 c x 2.5 3 p x 1.5 (pair screened) 2 voltage grade 1.1 kv 3 reference standard generally confirming to is: 9968 (part- 1)1998 4 conductor a. material to is:8130/84 annealed tinned copper b. nominal area of cross section(sq. mm) i)-unscreened core (sq. mm.) 2.5 ii) - screened pair (sq. mm.) 1.5 c. flexibility class as per is:8130/84 class-5 d. maximum dc resistance of conductor at 20 deg. c i)-unscreened core (ohms/km) 8.21 ii)- screened pair (ohms/km) 13.7 5 insulation i) material epr type ie-2 to is:6380/84 ii) nominal thickness (mm) 1.0 6 two cores of 1.5 sq. mm. size twisted together to form a pair yes. 7 individual pair screening each pair of 1.5 sq. mm. size taped with rpct, screened with 0.2 mm nom dia of annealed tinned copper wires braid, taped with melinex tape. yes. 8 no of cores / pair i)-unscreened cores 12 ii)-screened pairs 3 9 identification of power cores by number printing on cores. 10 laying up (i) three screened pairs laid up together, taped with rubber proofed cotton tape to form group as "a" (ii) 12 unscreened control cores laid up together around group as "a" of screened pairs and taped with rubber proofed cotton tape applied with open spiral. 11 inner sheath a) material to is: 6380/84 hd hofr csp type se-4 b) minimum thickness (mm) 1.6 12 an open braid of nylon cord reinforced in between inner and outer sheath. yes. 13 outer sheath a) material to is: 6380/84 hd hofr csp type se-4 b) nominal thickness (mm) 2.5 14 nom. overall diameter of cable (mm) 33.0 tolerance on nom. overall dia
Tender For corrigendum : supply of pcc and stp poles 8.5, 11 and 13 mtr , carriage of line material , installation and fixing of 11 kv tpmo. , erection and grouting of stay set , providing and fixing , acsr weasal, rabbit and dog conductor. , abc conductor , grouting of pcc and stp poles , plinth , fixing of earthing rod , chopping of tree branches , providing and fixing of clamps of lt , providing and fixing , 25 kva transformer , 63 kva transformer , 100 kva transformer , 400 kva transformer , dismentling of old pcc and stp poles , dismantling and removal , erection of section , carriage and installation , provding and fixing, filling , safe carriage , laying of under ground cable , laying of overhead cable , guarding of 11 kv line by laying two nos , safe carriage and installation , safe carriage and installation , provding and fixing wearing
Tender For corrigendum : supply of supply installation testing and commissioning of 1600 kva 11 by 0.433 kv delta star step down as per atc attached , supply installation testing and commissioning of 11 kv 630a rated breaking capacity 21ka for 3sec sf6 insulated rmu as per atc attached , sitc of 2500 amps sandwich type bus trunking as per atc. , supplying and laying of 3 core 150 sqmm xlpe insulated cable on the existing cable tray or rcc or hume or metal pipe or susface as per atc attached , supplying and laying of 3 core 150 sqmm stranded aluminium conductor conductor screen with extruded semi conducting compound xlpe insulated cable in the existing masonary duct as per atc attached , supplying and makingoutdoor cable end termination with heat shrinkable joint for 3 core 150 sqmm 111 kv grdae as per atc attched. , copper plate earthing complete as per atc attached. , gi plate earthing complete as per atc attached. , providing 50 mm and 5 mm thick copper strip on surface as per atc attached. , providing 25 mm and 5 mm thick copper strip in 40 mm gi pipe as per atc attached. , providing 25 mm and 5 mm thick copper strip on surface as per atc attached. , supplying and laying of 80 mm gi pipe a-class on surface as per atc attached. , supplying and laying of 80 mm gi pipe a-class in ground as per atc attached. , supplying and laying 120 mm dia dwc hdpe pipe as per atc attached. , supply and installation of 4.5 kg co2 type fire extinguisher isi marked as per atc attached. , supply and installation of 06 kgs abs powder type fire extinguishers as per atc attached. , supply and installation of 3 mm thick rubber mat suitable for 33 kv as per atc attached. , supply and installation 0f 4 nos 9.5 ltrs capacity gi bucket as per atc attached. , supply and installation of first aid box as per atc attached. , supply and fixing safety instruction chart as per atc attached. , supply and fixing shock treatment chart as per atc attached. , supplying and fixing of 40mm x 40mm x 5mm thick angle iron frame complete as per atc attached. , supplying and fixing of single line diagram and layout diagram complete as per atc attached.
Tender For corrigendum : laying of acsr panther conductor on 66kv 2nd circuit from akkanwali to davni on existing 132kv d/c towers under es division, hpsebl, nalagarh (h.p) on turn key basis against tender specification no. ssd-595/2026
Tender For survey, supply, installation, trenching, laying of duct,blowing of opticalfibercable through ducts,splicing, testing and commissioning for 48f opticalfibercablelaying in surat-ahmedabad (st-adi) section of ahmedabad territory of western region (sor-b pratap nagar-ahmed)
Tender For bid to ras supply of sitc control panel 10 loops , sitc control panel 4 loops , sitc control panel 2 loops , sitc of network module. the module shall connect panels and repeator panel , sitc of active repeater panel to be integrated , sitc of addressable ip67 rated multi- heat sensor , sitc of analogue addressable photo thermal smoke detector , sitc of addressable multi sensor with co detection , sitcc of response indicator on surface , sitc of short circuit isolator module , sitc of analogue addressable dual action manual call point , sitc of addressable horn strobe with a maximum output , sitc of analogue addressable supervised monitor module , sitc of analogue addressable supervised control module , supplying and laying through walls, above false ceilin , dismantling of fire alarm and detection system , supply and fixing in replacement of earth continuity conductor , dismantling of old unsv control panel , demolition of wall and ceiling board , supply and fixing of suspended system ) /bid number : gem/2026/b/7339023 * /dated: 18-03-2026 & & / bid document 1 / 19
Tender For survey, supply, installation, trenching, laying of duct, blowing of opticalfibercable through ducts, splicing, testing and commissioning for 48f opticalfibercablelaying in surat-ahmedabad (st-adi) section of ahmedabad territory of western region, sor-a surat-pratap nagar
Tender For providing of custom bid for services - work of opticalfibercablelaying for 4g sites in palanpur operational area under mehsana business area, gujarat circle