Latest optical power meter Tenders | Government optical power meter Tenders

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government/Public Sector

CTN :45714929

18 Jul, 2026 NA

Sonitpur - Assam

Tender For supply of 12 core adss optical fiber cable , 7 mtrs gi tubular poles for overhead , 9 mtrs gi tubular poles for overhead , tension assembly set , suspension assembly set , demountable pulley , adjustable cable storage bracket , ofc joint enclosure , erection of gi tubular poles alonwith fixation of accessories , laying of 12f adss cable overhead on the poles , patch cord , pigtail , otdr , splicing machine , optical power meter , multiplexer stm 1 mux with 120 km sfp module , laying of gi pipe 2 inch 50 mm diameter , fiber termination box , row charges

CTN :45728051

20 Jul, 2026 NA

West Singhbhum - Jharkhand

Tender For supply and transportation of optical power meter with visual fault locator. advance optical power meter 850/1300/1310/1490/1550/1625 nm calibrated wavelengths, normal opm & auto test opm mode operation with auto wave id features, threshold detection feature with pass/fail option, measurement range +10 to -70dbm, 0.01 db resolution, built in vfl 10mw, data storage 1000 traces, data transfer throughusb along with fc/pc connector adaptor. (sc/pc connector adaptor optional, ac/dc adaptor optional). make- stanlay, model-aop110t-v10 or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45551266

01 Jul, 2026 NA

Kharagpur - West Bengal

Tender For w acting for and on behalf of the president of india invites e-tenders against tender no e-73-dyceekgpw-cbc-26-27 closing date/time 01/07/2026 15:00 hrs. bidders will be able to submit their original/revisedbids upto closing date and time only. manual o ers are not allowed against this tender, and any such manual o erreceived shall be ignored.1. nit headername of workupgradation of cbc overhauling section and corrosion repair shop of wagonrepair shop, kharagpur workshop.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime01/07/2026 15:00date time of uploadingtender09/06/2026 16:38pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 2402108.76tendering section elegenbidding style single rate for tender bidding unitabove/below/parearnest money (rs.) 48100.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 18 monthscontract type works - general contract category expenditurebidding start date 17/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-cost of supply of material for electrical work1712792.421a12.00numbers383500.00 767000.00 at par 767000.00description:- supply of incoming 1x 630a,4p, 50ka mdo type microprocessor based acb withipr1+ release & outgoing (i)2 x 320a,4p, 36ka thermal magnetic release with adjustable thermal &fixed magnetic mccb (ics=100%icu),(ii)2 x 200a,4p, 36ka thermal magnetic release withadjustable thermal & fixed magnetic mccb (ics=100%icu),(iii)4 x 100a,4p, 36ka thermal magneticrelease with adjustable thermal & fixed magnetic mccb (ics=100%icu) tted in lt panel box14swg crca sheet powder coated 4way cu busbar of suitable rating, indicator lamp, digitalmultifunction meter & all other accessories. mccb & acb make:- havellls/ lk/ schneider/siemens.2a210.00numbers 400.02 4000.20 at par 4000.20description:- supply of mcb metal enclosure 4 pole3a380.00numbers 413.00 33040.00 at par 33040.00description:- supply of pyramid insulator as per drawing4a470.00numbers 531.00 37170.00 at par 37170.00description:- supply of pin type insulators as per drawing.5a550.00numbers1121.00 56050.00 at par 56050.00description:- supply of gi-angle (40 x 40 x 06 mm) bracket 4 way with porcelain insulator as perdrawing suitable for overhead light.6a610.00numbers 248.98 2489.80 at par 2489.80description:- supply of mcb metal box 2 pole7a720.00numbers1323.96 26479.20 at par 26479.20description:- supply of 16/20/25a power unit (containing 4 module plate, starter, socket and plug)for ac unit.8a85.00numbers11434.20 57171.00 at par 57171.00description:- supply and testing of oscillating type bldc pedastal fan, 230 v,400 mm sweep,multi speed, remote/button controlled make- atomberg, havells, crompton, bajaj, usha, orient.9a9 150.00 metre1150.50 172575.00 at par 172575.00page 1 of 18run date/time: 09/06/2026 16:38:46kgp-workshop-electrical/south eastern rlytender documenttender no: e-73-dyceekgpw-cbc-26-27closing date/time: 01/07/2026 15:009description:- supply of hot dip galvanized 2mm thickness perforated cable tray of size 300 mmwidth and 50 mm height and complete accessories as per is, ie rules and site requirement10a10 50.00 metre 575.25 28762.50 at par 28762.50description:- supply of cable trays 2mm thickness size 100 x 50 mm gi, perforated (rmt) withcover complete and as per is, ie rules and site requirement.11a11 10.00numbers 180.54 1805.40 at par 1805.40description:- supply of combined switch socket box - 16 a, capton 5-in-1 combined switch andsocket with isi mark,as per is:3854 or latest12a122.00numbers34700.26 69400.52 at par 69400.52description:- supply of 4 pole mccb ,release range (80-200)a, breaking capacity 36 ka,microprocessor release with inbuilt earth pr

CTN :45617474

04 Jul, 2026 NA

Nainital - Uttarakhand

Tender For corrigendum : providing of custom bid for services - calibration of otdr and optical power meter

CTN :45704797

06 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of poly film tubes 1 to 10 mm pack of 20 , clamp meter fluke , twisted wire wheel cup brush , combination drill tap bit set 6 pcs , drive pin punch set , 7 drawer roller tool cabinet , tyre tube puncture repair machine portable , rubber mat for elect sec 5mm , insulated screw dvr set stanley , switch socket 15 amp with indicator , switch socket 5 amp , office chairs , digital bore gauge kit 50 to 160mm , hy duty universal hyd gear box trolley jack 2 ton , premium cordless hammer drill machine dewalt , jump lead for heavy veh , heavy duty forged steel wire set of six

corporations/Associations/Others

CTN :45712936

13 Jul, 2026 19.20 Lacs

Sonbhadra - Uttar Pradesh

Tender For running maintenance of plc system - running preventive and breakdown maintenance of plc control system with electrical drives all control and instrumentation system of ash handling , replacement new erection of impulse line , replacement new erection of instrument fitting adopter nut tails elbow connector etc , overhauling b 501 and b 601 ss cock valve , overhauling repairing of junction boxes , servicing recalibration erection of fuzi yokogava rosemount etc transmitters , overhauling and recalibration new erection of digital indicators , overhauling and recalibration erection of flow meter conductivity meter , complete overhauling erection of level switches , replacement of pressure switch gauge vibration switch , removal testing erection commissioning calibration of temp gauges switches thermocouple , replacement erection overhauling cleaning of union isolating valveforged body valve , blowing of tapping points of different pressure transmitters switches , fabrication repairing of instruments plateform , laying patrolling of instrumentation cable , servicing and maintenance of air conditioner , cleaning of control room plc system , repairing of ups , service replacement of faulty butterfly valves along with act , servicing replacement of faulty diaphragm type valves , changing spindle gland of root valves , cleaning blowing by air of impulse lines , attend leakage from steam water air line , replace gauges switches of pressure temp , testing caliberation of pressure gauges , testing calibration of pressure switches , testing calibration of temp gauges , testing calibration of temp switches , replacement of thermocouples , cleaning servicing of terminal block in compressor house swas system , changing of ss root valves , servicing of 10mm hp lp 3way manifold valves , replace of 10mm hp lp 3way mfold valves , removal choking replace of impulse line , erection replacement of pvc armored compensate cable , replacement of universal digital indicator , servicing replacement of faulty 4way valve with actuator , replacement remounting of smps 24 v dc , dismantling replacement of combination timerof compressor , servicing of sampling cooler dhx18 sco2 , servicing of sampling cooler dhx12 sco2 , servicing of sampling cooler dhx06 sco1 , miscellaneous mechanical febrication , maintenance of actuator of butterfly valve , maintenance and upkeep of terminal box of motor of actuators in cw pump , maintenance re erection of butterfly valve actuator motor , revisioning and upkeep of marp dcs panel , revisioning testing of various type of switches of local control panel , maintenance revisioning upkeep and testing of 415 v power supply module , maintenance upkeep and repair of junction box of butterfly valve , servicing of mov motors actuators and limit switch assembly , checking cleaning and cable dressing mov motor , overhauling cleaning reconditioning of various size batteries , load test once in six months for various size battery of ups installed for 5x200mw , replacement of damaged switches mcb in acdb panel , cleaning painting of the wooden battery stands , maintenance of window type split type ac , gas charging of ac , rewinding of burnt fan motor

State Government

CTN :45703400

10 Jul, 2026 NA

Jharsuguda - Odisha

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - annual overhauling of c&i equipment’s for - box spanners (mm & inches), size up to 50-min. 4 sets, ring spanners (mm & inches), size up to 50-min. 4 sets, de spanners (mm & inches), size up to 50-min. 20 sets, slide wrench 6", 8"- min. 20 sets, slide wrench 12"-min. 10 sets, pipe wrench 300 mm min. 5 sets, pipe wrench 450 mm min. 5 sets, combination pliers - min. 20 sets, mini connector (taparia make) - min. 20 sets, 1. screwdriver sets-min. 20 sets, - champion set - min. 20 sets, . connector taparia (932) - min. 20 nos, . watchmaker set - min. 5 sets, . junior hacksaw with frame - min. 20 sets, 6. teflon hammer - min. 5 sets, 6. ss tube cutter-min. 5 sets, . slide cutting pliers-min. 20 sets, nose pliers-min. 20 sets, . soldering iron - min. 2 sets, multi meter with all function (fluke) - min. 20 sets, ma source-min. 2 nos, wire stripper-min. 20 sets, flat screwdrivers (small/medium/large) - min. 20 sets, led torch light (good quality)-min. 20 sets, allen key set (mm & inches), normal sizes-min. 20 sets (each), portable drilling machines with bits-min. 3 nos, portable grinding machines with wheels-min. 4 nos, general file set & needle file set-min. 5 sets, chisel set, hacksaw frame with sufficient blades-min. 5 sets, centre & hole punch set; letter & number punch set-min. 3 sets, tap set (6, 8, 10, 12 mm & ", 6", 1")-min, 4 sets each, flaring tool-min. 3 not, pointer puller-min. 3 nos, portable welding set with welding rods-min. 4 sets, hand lamp set (24 vdc)-min 5 sets, hand lamp set (240 vac)-min. 7 sets, power extension board with rccb-min. 7 nos, feeler gauge-min. 3 sets, thread gauge-min. 3 sets, ss tube benders (6, 8, 10, 12 mm)-min. 4 sets each, circlip plier (inner/outer)-min. 3 nos each, air blower-min. 4 nos, anti-spark spanner set & slide wrench (6", 8", 12")-min. i sets, spray painting machine-min. 3 sets, magnetic spanner-min. 2 sets2x660 mw unit # 4.

Central Government/Public Sector

CTN :45698466

10 Jul, 2026 NA

Delhi - Delhi

Tender For supply, installation & commissiong of optical fiber loss test set, the set consist of optical power meter with 1030 st-pc fiber optics connector adaptor and led source with built-in st-pc connector interface. make/model:- ki2803/ king fisher or similar. as per annexure attached. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45683956

06 Jul, 2026 NA

Bhubaneswar - Odisha

Tender For auction sale of u/s mw antenna, power plant, fdf, optimux equipment, mutiplexer,u/s splicing machine, otdr, optical power meter,u/s window ac 1.5 ton, ddf, digital mw, dehydrator,u/s ddf bar, ddf rack,exim power plant etc,u/s otdr,, splicing machine

Optical Power Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector

corporations/Associations/Others