Latest organiser Tenders | Government organiser Tenders

Central Government/Public Sector

CTN :45066272

25 May, 2026 NA

Amritsar - Punjab

Tender For supply, installation and commissioning of solar panel system including light & fan along with other electrical works in bvcm wagon as per rdso drawing no. wd-24050-s-07/sheet ii with alt-3 or latest at northern railway mechanical workshop amritsar.

Central Government/Public Sector

CTN :45037375

26 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of pallets to the attached drawing number icf/j&t/misc-3088, for storage of scrap sheet off cuts. painting condition as mentioned below. (this painting condition supersedes painting condition mentioned in the drawing) pallet to be painted with a) two pack epoxy primer, b) pu primer/undercoat and c) pu enamel topcoat. before application of the primer a good surface preparation like degreasing is to becarried out by washing or wiping with suitable solvent. thoroughly sand the surface with emery paper 180, so as to remove loose rust and wipe clean. apply 2 pack epoxy primer. before applying pu primer/under coat sand the primer with emery paper no. 400. wipe clean and ensure that the surface is free of particles. apply pu primer/under coat. before applying top coat, sand the pu primer/under coat with emery paper no. 400. wipe clean and ensure that the surface is free of particles. apply pu enamel topcoat (brands : asian or berger or indigo or dulux or nerolac). colour: ral 2004 (pure orange) shade. note: topcoat to be applied only after getting confirmation of the exact colour shade of the respective brand from the consignee. allocation: p 4175 4000 5000 j 004 000 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45066700

28 May, 2026 NA

Kapurthala - Punjab

Tender For supply of harness for hog compliant lhb eog high capacity parcel van coaches., as per drawing: edts406,rev-nil,am-2,corr-1&2, packing instruction: cable harness: complete one coach set cable harness to be protected with biodegradable transparent polythene sheet and packed in a wooden box. soft eco-friendly packing material hay,straw, etc be provided inside the wooden box to protect any damage to cable insulation while packing/unpacking.bottom frame to be made of wooden planks 20mm thick & should have supportof atleast 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. rigid pvc conduit supplied loose along with harness should be packed asper instructions .the material used for product packaging shall be eco-friendly.a list should be pasted on each packing showing order no ,pl no, description of the item, drg.no/spec.no, qty , firm's name &address and date of despatch etc. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44995474

25 May, 2026 NA

Kapurthala - Punjab

Tender For supply of austinitic steel sheet 5x1250x3000 mm., as per drawing: rdso spec. no. c-k201, grade x5crni1810 (304) table 1&2, heat treatment condition 2b as per table-5. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45283035

25 May, 2026 NA

Kapurthala - Punjab

Tender For supply of set of honeycomb partition frame for lhb first ac coaches with al fr hpl sheet as per spec mdts-097 rev. 01 in which hpl is as per mdts-26337 rev 00 instead of mdts-086 (with hl3 feature), as per drawing: mp22hcpfac version 4 [ warranty period: 84 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45284566

05 Jun, 2026 NA

Kota - Rajasthan

Tender For supply, fabrication and installation of a rainwater proctection .tray type cover for a weldingmachine panel. installed above the welding machine panel. fabricated from ss 304 grade stainless steel. the tray shall be of size 850mm x 450 mm, made from 1.5 mm thick ss 304 sheet , and supported with a 25 mm x 25 mm x 5 mm ss angle frame , complete with stainless steel nuts, bolts, and fasteners. all corners shall be properly welded to ensure a wtaer leak-proof construction, and all top edges shall be neatly folded. the drawing/ sample shall be approved by user, prior to bulk supply. [ warranty period: 30 months afterthe date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45117179

01 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of .wall mounting type /pole mount type junction box (jb) made of poly carbonate (pc) of size should not be less than 330mmx330mmx130mm should have degree ingress protection ip 65 in accordance with iec 60529. the jb shall have the polyamide locking screw with internal polyamide hinge which should interchanged to both side for opening the enclosure easily from left to right or right to left as per the site condition .the jb shall be suitable to perform under ambient temperature -25deg c up to +85 deg c & should be able to resist isolated tension 1000v . the jb shall be halogen & silicon free .the jb shall be fire retardant & self extinguishing the combustion behaviour shall be in accordance with de 0471/ul94 for 960degc . the jb shall be uv resistance according to ul 746. supplier shall submit the routine test report .supplier should submit drawing &data sheet of all the components for technical evaluation during tender it self. junction box shall be similar to cape make polycarbonate junction box. acceptable make :cape/ famatel/ hensel/rittal/abb with following switch gear and terminals fixed in the junction box as per drawing enclosed. 1) 35sqmm stud type terminal block -04 nos make: connect well/ elmex/ 2).6a single pole mcb 10ka-3nos c curve . mcb make shall be abb/l&t /eaton/siemens,havells, c&s. 3) 2.5 sqmm, 10a terminalblock similar to elmex 2.5sqmm - 09 nos makes:connect well/ elmex 4)20mmx10mm x 75 mm length tinned copper busbar for earth and neutral each 1 no to be fixed in box with suitable insulated bushes. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45049605

26 May, 2026 NA

Secunderabad - Telangana

Tender For supply of bridge sheet 5x491x1120 (for icf designed lhb coaches) conforming to aisi-304 & din 59220 and to icf drawing no. lwsczac-2-5-026, alt.- a/nil. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45209796

03 Jun, 2026 NA

Mancheshwar - Odisha

Tender For washable pillow, size: 600 (+/-10 )mm length(l) x 400 (+/-10) mm width(w) x 120 (+15/-0) mm thickness(h) to drawing / specification as per construction details: 1) material of pillow-polyester staple fibre, 2) fibre content-100% white virgin hollow fibre, 3) pillow weight-600 (+/-10) gram, 4) pillow should be surrounded by virgin hollow fibre sheet of 20 mm thickness (min). virgin property of polyester fibre on gtc of oem, 5)the covering of cloth should contain 50% (min) polyester yarn and balance cotton. 6) pillow should be resistant to normal wash as per gtc of oem. 7) pillow covering cloth: it should be of light greycolour (indicative shade isc: 631 of is 5:1994), 8) logo monogram: at one corner of pillow, the following should be woven within an area of 7 cm x 5 cm with the following information & should be stitched: "indian railways" in hindi & english, year & month of manufacture, manufacturer%u2019s name and brand, 9) packing: each pillow should be packed in thick polyethene packing bag (to withstand transit damage). firm should submit three samples to the consignee to get printing, monogram & stitching design approved before bulk manufacturing, inspection & supply. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45275080

04 Jun, 2026 NA

Panaji - Goa

Tender For ghrssidc/e-t/2026-27/731 - dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm., dismantling cement asbestos celotex or other ceiling or partition hard broad wall including stacking of serviceable materials and disposal of unserviceable materials within 50 mts. lead., dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. leada.of area 3 sq.m. and below, clearing debris includes civil/elect items from site and disposing the debris 10km away from the site including loading unloading labour charges and clearing the site good for work etc.complete, providing and fixing of double leaf door with cnc cutting as per design made in -20mm plywood with 3mm thick veneer using ss pvd coated t patties and pu paint and melamine polish using ply of century or equivalent brand including all necessary hettic soft closing fittings etc. complete, providing and fixing of single leaf door made in -12mm plywood with 3mm thick veneer using ss pvd coated t patties and pu paint and melamine polish using ply of century or equivalent brand including all necessary fittings etc. complete, providing and fixing of partition board paneling with aluminium frame work of section size 50mmx25mm vertically and horizontally at 600mm c/c with 12mm thick plywood, top with 3mm thick veneer sheet and using ss pvd coated t patties and pu paint and melamine polish for smooth finish, using century ply or equivalent brand for panelling and fixing with necessary screwing and supports etc.complete, supplying of fire sensor / smoke detector-10nos / existing sprinker replacement / relocation / wiring / hooter panel etc, providing and fixing vitrified double glazed finished of 10mm thick tiles of size 8ft x 4ft in floor, treads or riser of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry filling tile joints with matching pigment and make of of kajariya/ simpolo of any colour as specfied by engineer in charge etc.complete., proving and fixing false ceiling of 1.5mm thick aluminium powder / anodised / painted / coated -profiled panels mounted on ms/ gi frames for support and painted / powder coated chanels / with provision for ac trap, door and light fixing,as per engineer incharge etc.complete, providing and laying in position (1:11/2:3) reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1 coarse sand:3 graded stone agg 20mm nominal size) c. in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level, supplying and fixing of window / roller blind made in100% polyster fabric design plain and colour as per engineer in charge, providing and fixing of 3+2+1+1 seater sofa set made in sal wood frame with high density foam as design as per drawing and engineer in charge, supplying and fixing of designer artifacts showpiece design as per drawing and engineer in charge, supplying and fixing of nylon based carpet 5 mm thickness with backing design as per drawing and engineer in charge, supply and placing in position artificial planters with ceramic pots etc complete as shown in the drawing and as directed engineer incharge., design & supply of signages made from 2mm thick external grade acp sheet of size (wall mounted) with high grade plotter-cut/cnc-cut vinyl & auto-glow vinyl pasted lacquering of letters/pictogram on front side of the plate, of varying colours as per detail drawing and engineer in charge., supplying and fixing of pa - speaker wiring with 6nos ceiling mount speaker to be connected to existing pa system including cabling ,fittings accessceries and necessary supports etc complete., supplying and fixing of light fittings of make -hybac /haffle /phillips / panasonic/ anchor/

Organiser Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors