Latest orifices Tenders | Government orifices Tenders

CTN :45517156

11 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For supply of orifices in ss304 material as per astm a276

CTN :45486249

22 Jun, 2026 40.75 Lacs

Kurukshetra - Haryana

Tender For purchase of lab equipment item for material testing laboratory as per nabl norms. - electronic balance 200 gm, accuracy 0.001 gm, standard weight box (stainless steel) 1 mg to 200 gm, variable flow type air permeability apparatus (blaine type)variable flow type air permeability apparatus (blaine type), whatman filter paper 40 (pkt. of 100 pcs), digital thermo hygrometer, mercury, stop watch digital 1/10 sec, electronic balance 1 kg capacity, graduated cylinder, length comparator, shrinkage bar mould (single), humidity chamber (heating), cement autoclave, le-chatelier water bath, steel scale 300 mm, le-chatelier mould, vicat apparatus with dashpot, vicat mould, electronic balance 6 kg 0.5gm readability., poking rod for cement, cube mould (70.6 mm), standard sand grade-i (25 kg bag), standard sand grade-ii (25 kg bag), standard sand grade-iii (25 kg bag), vibrating machine, automatic compression testing machine 500 kn, accelerated curing tank , gauging trowel, electronic balance 15 kg, cube mould (150 mm), automatic compression testing machine 2000 kn, vernier caliper digital 300 mm, measuring scale 300 mm, hot air oven 450 x 450x 450mm., water bath (28 ltr), electronic balance 10 kg capacity 1gm readability., concrete test hammer 10-100 proceq, anvil for concrete test hammer., ultrasonic pulse velocity apparatus, half cell potentiometer (rebar corrosion detector)

State Government

CTN :45187417

19 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For corrigendum : procurment of different size of ceramic lined coal pipe orifices for xrp-1003 mill at 2x500 mw, abvtps, marwa

CTN :45432944

15 Jun, 2026 NA

Imphal - Manipur

Tender For supply of digital vernier caliper , digital micrometer screw gage , plastic beaker of slit contain , weighing machine 0 to 50 kgs , measuring tap 5 mtr , measuring tap 3 mtr , measuring tap 30 mtr , steel scale 12 inch , slump cone test apparatus , enamel four tray , ultrasonic thickness gauge machine

CTN :45340402

04 Jun, 2026 NA

Theni - Tamil Nadu

Tender For purchase of non consumable item in hydraulic lab for civil department - bernoullis theorem apparatus(closed circuit)(code e001)bernoulli apparatus flow rate range up to ~20 l/min or more (depending on pump) pump power ~0.5 kw / -1 hp pressure measurement ~0 290 mm to 370 mm wc measuring tank 25 50 l utility 230 v ac, single phase, venturimeter and orifice meter apparatus (closed circuit)(code e002)orifice & mouthpiece apparatus set of orifices: usually 2 sizes (e.g., 8 mm, 10 mm) or more. set of mouthpieces: several l/d ratios (e.g., 10 mm dia with l/d 1, 2.5, 4). sump tank capacity: ~70 100 l. constant head tank: ~20 35 l. measuring tank: ~25 40 l with scale. pump: 0.5 hp monoblock / centrifugal pump (single phase). instrumentation: hook gauge / pointer gauge for head/jet measurement; stopwatch. power supply: 220 230 v ac, single phase., pipe friction apparatus (closed circuit) with all acceeories(code e003)pipe friction apparatus test pipe length ~1 m per pipepipe diameters 12 mm 25 mm (varies)sump tank capacity ~40 l 100 lvolumetric tank ~40 lpressure range (manometer) ~300 500 mm water / mercuryflow rate range 0 60 l/minpump 0.5 hp centrifugal, centrifugal pump testing rig with all accessories(code e004)single speed centrifugal pump testrig (closed circuit) (heavy duty)a. single speed stainless steel centrifugal (mono block) pump set of size 25mm a 1hp, 2880rpm, single phase 50 cycles, 200/220 volts ac electric motor. to discharge about 100lpm at 10 meters head at a single speed of 2880 rpmb. switch and dol starter for the above pump set and an energy meterc. piping system consisting of pipes, valves, and fittings with pressure and vacuum gauges (gi/pvc).fibreglass lined s.s. measuring tank of size 500x500x600mm height provided with a gauge glass, scale and adrainvalve. fibreglasslined s.s. sump of size 1500x500x300 mm height capacity rigid stainless steel frame work compactly fitted with all the above items as a self sufficient package, reciprocating pump testing rig(code e030)reciprocating pump apparatus type of pump single acting reciprocating pumpcylinder bore 50 80 mmstroke length 100 150 mmspeed 30 60 rpmdischarge 5 20 lpmsuction head up to 5 mdelivery head up to 20 mmotor power 0.5 1 hpmotor speed 1440 rpmpower supply 230 v ac, single phasepressure gauge range 0 5 kg/cm vacuum gauge range 0 760 mm hgmeasuring tank capacity 30 50 litersmaterial cast iron pump, ms framedrive belt drive / direct coupling, mouthpiece & orifice setup(code e002 )experiments : to determination of cd, cv, and cc of venturi meter.specificationsventuritype : acrylicsize/dimension : 350mm 350mm 600mmnominal size : 25 mmend connection : gi pipeusage/application : laboratorybody material :stainless steelorifice meterapparatusexperiments : to determination of cd, cv, and cc of orifices meter.specificationspump : hp centrifugal pump.ac motor : hp 230v ac.supply tank : 120 ltrs. made of ms with frp lining.measuring tank : 40 ltrs. made of ms with frp lining and fitted with piezo meter tube & scale.piping &fittings : gi/pvc with necessary valves.fitted with u-manometer with mercury.control panel : 1hp dol starter.digital timer : mcb load and line indicator.

State Government

CTN :45341492

04 Jun, 2026 NA

Parli - Maharashtra

Tender For procurement of coal mill discharge pipe orifices required for coal mill bbd-4772 during annual overhaul at bm-1, 250mw, tps, parli-vaijnath.

CTN :45322006

01 Jun, 2026 NA

Panipat - Haryana

Tender For rc/purchase of workshop tool / general consumables material (part-1) > - araldite, make- pidilite (1.8kg packing), sr-998, make: pidilite, ( per kg), m-seal (per kg.), make: pidilite, locktite -406 (per 20ml), make: hankle, blue tube paste (set), hold tite (kg.), make-pidilite, rustolene (per ltr), birkosit sealing compound, dunlop adhesive (kg.), safeda (zink white powder) (per kg), graphite powder (kg.), make-vicco, lock tite 641 standard make (50 ml), lock tite 401 standard make (set), safety solvent standard, molikote paste 1000 (pkt./tube), molykot- g rapid plus, molykot- d-321 spary, molykot spray 1000 (400 ml), molykot grease 1000, molykot-z powder (per kg), anabond 666 (100gram), molykot spray l-0500, stag-b compound jointing (per kg), dp test kit set of 03 bottles, make: checkmate, wd-40 spray (400 ml), make- pidilite, brasso (500 ml), puf spray pu foam insulation sealent (750gram), make- abro, roll guard grease, make: j.d jones (per kg), grease unirex n-3, make- mobil (per kg), gadus grease s2 v 100 3, make- sheel (per kg), bearing retainer 660, thread seal 542, fevicol sh (per kg), cold galvansing compound (6017) pure zink undercoating, make- twin tech india pvt ltd., feviquick 50 ml, cotton waste (kg.), marking cloth (mtr.), filter cloth, coton cloth (canvas), size-48 (per mtr), old dhoti, heavy duty forged steel u-clamp (pcs), steel wire brush (pcs.), painting brush size 2 ashoka make, painting brush size 3 ashoka make, painting brush size 4 ashoka make, painting brush size 5 ashoka make, painting brush size 6 ashoka make, steel lock, size-65mm , make- harison, aldrops with accessories, size-12 , material-steel, chargeble led torch 6 to 8 , teflon tape, make- champion, grease gun 2 kg., grease gun 5 kg., grease gun 10 kg., power master make tube expander with main drill shaft and ratchet handle complete set size 45mm, power master make tube expander with main drill shaft and ratchet handle complete set size 90mm, vibration meter, (pcs.), ultrasonic thickness tester (set), measuring tape 3 mtr., make-hi-wide (pcs.), measuring tape 5 mtr., make-hi-wide (pcs.), measuring tape 10 mtr., make-hi-wide (pcs.), measuring tape, 13mm fiberglass water proof, 50 mtr, make- freemans, measuring tape, 13mm fiberglass water proof, 100 mtr, make- freemans, grinder ag-4, make: bosch, grinder ag-7, make: bosch, impact wrench model gds 18e, make: bosch, walkie talkie model-tk3501 make: kenwood (license free), temperature gun, range: 0-2000c, make- fluke, temperature gun, range: 0-5500c, make- fluke, ss paint air spray gun, master level +0.02mm accuracy, size-6 , make- mitutoyo/rsk japan, dial test indicator with magnetic stand, 50mm, make- mitutoyo., shore-a digital rubber hardness durometer (din-53-505,aspm-d,2240) (pcs.), make- eco-sr, drill machine 0 to 10mm make bosch, lead wire 0.5mm (per roll rate required), lead wire 0.7mm (per roll rate required), zig zag clamp, size-3/4 , tube expender with main drill shaft with ratchet handle complete set, make: power master, car washing pressure pump heavy duty, working pressure 125 bar with 40 mtr extra pipe.(jet pump), make: bosch, electronic type weighing scale, range-0.01mg to 100gm, electronic weighing scale suitable upto 2kg, electronic weighing machine, size-600x600mm, cap-200 kg, electronic weighing machine, size-400x400mm, cap-100 kg, electronic weighing machine, size-400x400mm, cap-50 kg, straight shank bit/tapper shank drill bit/ tap set, make- miranda, heavy duty impact socket with hole 19mm for impact wrenach, heavy duty impact socket with hole 30mm(suitable for 1 inch square) for impact wrench, heavy duty impact socket with hole 32mm(suitable for 1 inch square) for impact wrench, heavy duty impact socket with hole 34mm(suitable for 1 inch square) for impact wrench, heavy duty impact socket with hole 46mm(suitable for 1 inch square) for impact wrench, sa-46 steel socket set, make- taparia, tool goti 34 no., air blower, make- bosch, hot air blower 1500 watt bajaj make (room heat

CTN :45272953

26 May, 2026 14.29 Lacs

Multi City - Andhra Pradesh

Tender For dismantling and re-erection of pipes, bends, elbows, t-pieces/transition pieces of above classifiers, replacement/reversing of orifices in pf lines and tilting of straight pf lines for worn-out pipes, replacement of worn-out straight pieces in pf lines by removing matching flanges and welding to the new pieces of pf lines during the r&m works of unit5&6 boilers proposed for the period 2026-27.

State Government

CTN :45230236

22 May, 2026 NA

Bhusawal - Maharashtra

Tender For contract for work of inspection of boiler tubes by ultrasonic thickness measurement, insitu oxide scale measurement, nondestructive testing along with radiography interpretation of hp weld joints during coh of unit 5 at 2 x 500 mw btps bhusawal.

Central Government/Public Sector

CTN :45126486

21 May, 2026 NA

Sultanpur - Uttar Pradesh

Tender For corrigendum : packing of orifices ventury vanes and other similar items and rework on reworkable fired ceramic tiles in ceralin area at bhel fsip, jagdishpur under framework agreement (fa)

Orifices Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector