Get complete information related to latest Orion Ion Meter Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Orion Ion Meter Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Orion Ion Meter Tenders.
Tender For supply of fire fighting tools and equipments - half body harness, full body harnessfull body harness in double colour , 44mm chest strap with single dorsal d ring confirms to is standard./ en approved with 1.8m three strand polyamide rope with scaffold hook., fireman sefty goggles (full shied) isi marks is-5983, fire delivery hose b type (5000 mtr) 30 mtr length with male/female coupling ss (isi marks) delivery hose b type working presser 7kg hydro test 12kg, afff foam 3% ul tested hs-38130000 20 litre can, dragon torch light (isi marks) 1 km. length multipurpose useechargeable lithium battery; operating time 8 hrs; ip65 waterproof; shock resistant body; charger included., auto fire off /fire ballautomatic activation at 70 c 10 c; suitable for class a/b/c fires; weight approx. 1.3 kg; audible alarm; shelf life 5 years., fire man gloves (isi marks) is 16874:2018, fire man gumboots (isi marks) 90 f bisi-14128, fire man axe (isi marks) 33000 voltes tested 926 (1985), electrical hand gloves (isi marks) 11000 voltes tested isi -6994 part -1 1973 en-60903, fire proximity 3 layered suit isi -16890:2018 en 469:2020, abc type fire extinguishers 4 kg capacity isi -15683, co2 type fire extinguishers 4.5 kg capacity isi -2171, foam type fire extinguishers 9 ltr capacity (isi marks) is 15683, scba set with light weight carbon composite cylinder 300 bar en approved carbon fiber vs aluminum vs titanium 6 ltr 300 bar msa drager sect company an si 2882, safety net isi -11057 bhart, fire man helmet (isi marks) ansi z -2.89 and is 2925-1984, fire bitter with bamboo,fire beaters specification conforming to is:8096 latest, handle length 800 millimeterhandle diameter 30 5 mm, fire beater blade size 452 mm x 352 mm,mild steel sheet for shank mild steel sheet for shank conforming to is 1079, fire delivery hose b type 15 mtr length with male/female coupling ss (isi marks) delivery hose, stretcher,foldable aluminium alloy frame; load capacity 150 kg; safety belts provided; portable design.material of the stretcher frame- aluminium ,stretcher length 200-220,, multipurpose branch,fire service standard.is: 2097 (latest)types and respective discharge rate as per cl 4 and 6-1 (table -1) of is 2097fb 10x (jet), fireman dangri suit, the finished fr overall (dangri) shall be certified to the following international governing standards(i) en iso 11611 - 2007(ii) en iso 11612 - 2008, short branch, aluminium alloy construction; is:903 latest, combi tool ( battery operated),hydraulic rescue tool; cutting, spreading & pulling functions; battery operated; ip54 protection; spare battery, charger & carrying case included; conformity to standards (nfpa 1936 with latest amndmnt),highest spreading force (hsf)in kn 1500, lowest spreading force(lsf) in kn 30,material of cutter of blade(dropped-forged special steel alloy)availability of test reports from central govt /nabl / ilac accredited lab covering all the parameters(yes),copy of test reports and certifications to be provided to buyer on demand at time of supplies,cutting class of combitool a7,b8,c7,d8,e7,type of battery lithium ion based rechargebale
Tender For supply of fire fighting tools and equipments -0 half body harness , full body harness full body harness in double colour, 44mm chest strap with single dorsal d ring confirms to is standard./ en approved with 1.8m three strand polyamide rope with scaffold hook. , fireman sefty goggles (full shied) isi marks is-5983 , fire delivery hose b type (5000 mtr) 30 mtr length with male/female coupling ss (isi marks) delivery hose b type working presser 7kg hydro test 12kg , afff foam 3% ul tested hs-38130000 20 litre can , dragon torch light (isi marks) 1 km. length multipurpose useechargeable lithium battery; operating time ≥8 hrs; ip65 waterproof; shock resistant body; charger included. , auto fire off/fire ballautomatic activation at 70°c ±10°c; suitable for class a/b/c fires; weight approx. 1.3 kg; audible alarm; shelf life ≥5 years. , fire man gloves (isi marks) is 16874:2018 , fire man gumboots (isi marks) 90' f bisi-14128 , fire man axe (isi marks) 33000 voltes tested 926 (1985) , electrical hand gloves (isi marks) 11000 voltes tested isi-6994 part-1 1973 en-60903 , fire proximity 3 layered suit isi-16890:2018 en 469:2020 , abc type fire extinguishers 4 kg capacity isi-15683 , co2 type fire extinguishers 4.5 kg capacity isi-2171 , foam type fire extinguishers 9 ltr capacity (isi marks) is 15683 , scba set with light weight carbon composite cylinder 300 bar en approved carbon fiber vs aluminum vs titanium 6 ltr 300 bar msa drager sect company an si 2882 , safety net isi-11057 india , fire man helmet (isi marks) ansi z -2.89 and is 2925-1984 , fire bitter with bamboo, fire beaters specificationconforming to is:8096 latest, handle length800 millimeter handle diameter30±5 mm, fire beater blade size452 mm x 352 mm, mild steel sheet for shankmild steel sheet for shank conforming to is 1079 , fire delivery hose b type 15 mtr length with male/female coupling ss (isi marks) delivery hose , stretcher, foldable aluminium alloy frame; load capacity ≥150 kg; safety belts provided; portable design. material of the stretcher frame- aluminium, stretcher length 200-<220, s , multipurpose branch, fire service standard.is: 2097 (latest) types and respective discharge rate as per cl 4 and 6-1 (table -1) of is 2097 , fb 10x (jet) , fireman dangri suit, the finished fr overall (dangri) shall be certified to the following international governing standards , (i) en iso 11611 - 2007 , (ii) en iso 11612 - 2008 , short branch, aluminium alloy construction; is:903 latest , combi tool (battery operated), hydraulic rescue tool; cutting, spreading & pulling functions; battery operated; ip54 protection; spare battery, charger & carrying case included; conformity to standards (nfpa 1936 with latest amndmnt), highest spreading force (hsf)in kn 1500, lowest spreading force(lsf) in kn 30,material of cutter of blade(dropped-forged special steel alloy)availability of test reports from central govt /nabl/ilac accredited lab covering all the parameters(yes), copy of test reports and certifications to be provided to buyer on demand at time of supplies, cutting class of combitoola7,b8, c7,d8, e7, type of batterylithium ion based rechargebale
Tender For supply, installation and commissioning of 01 set of esd safe lab equipment consisting of following items :- 1) programmable dc power supplies (hsn code : 8504409540) model-1743b or similar technical specification, make-b & k precision or tektronix or hantek input-115 to 230 vac +/- 10%, 50/60hz, output- variable 0 to 35 v dc at 0 to 6 amps capacity qty . :- 01 no. 2) multi range programmable dc power supplies (hsn code : 8504409520) model-9206 or similar technical specification, make-b & k precision or tektronix or hantek input-110 /220 vac (+/- 10%) , 47 hz-63 hz, output- variable 0 to 150 v dc at 0 to 3 amps capacity with cover qty. :- 01 no. 3) digital storage and mixed signal oscilloscopes (hsn code : 8504409520) model-2567 or similar technical specification, make-b & k precision or tektronix or hantek channel-4, bandwidth-200mhz, sampling rate-2gsa/s, maximum input voltage-1 mohm : <400 vpk; 50 ohm: <5 vrms dc gain accuracy +/-3%, 5 mv/div to 10 v/div +/- 4% : <2 mv/div. qty. :- 01 no. accepted make/brand: b&k precision or similar. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply, installation and testing of electronic equipments - supply -ece lab equipments, single output regulated dcvariable power supply- input voltage: 230v / 50hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply- input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator - frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, digital ic trainer kit with breadboard - +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie- points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulseper press)., dc voltmeter(digital) - dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc,accuracy: class 0.5( 0.5 % full-scale), dc ammeter - dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc,accuracy: class 0.5 ( 0.5 % full-scale), lvdttrainer kit - ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain gauge trainer kit - ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. instrumentation amplifiers with 3 digit display for strain / output voltage. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., ask modulation and demodulation kit - message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. supply voltage (board): +12 v, +5 v dc. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fpga trainer kit - must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb- uart bridge, usb cable. user manual., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.
Tender For supply of set of hexagonal headed bolt for yaw damper assembly of emu us bogies as per annexure - a, make- tvs /unbrako only. material to be purchased from authorised dealers only with authorization certificate at the time of offer. material test certificate required from oem/ nabl approved lab, warranty certificate as per irs condition. material to be supplies in standard oem packing. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of set of hexagonal headed bolt for traction bar assembly of emu us bogies as per annexure - a, make- tvs /unbrako only. material to be purchased from authorised dealers only with authorization certificate at the time of offer. material test certificate required from oem/ nabl approved lab, warranty certificate as per irs condition. material to be supplies in standard oem packing. [ warranty period: 30 months after the date of delivery ] ]
Tender For ece lab items dept use - eliminator transformer (step-down) kitinput - 220v - 240v ac, 50 hz, output-2v to 12v dc, 0-2 a ripple: 5mv, strain gauge trainer kitmetal foil strain gauge mounted on beam/cantilever strain measurement under applied load wheatstone bridge arrangementsignal conditioning and amplification circuitinstrumentation amplifiers, 3 digit display of strain / output voltage zero and gain adjustment controlsprovision for applying calibrated loads regulated power supply, 230 v ac, 50 hz table-top trainer with labeled paneltest points to measure the signalsbuilt in power supplies and wooden closed cabinet supplied with patch cords and experiment manual, temperature measurement kitsensors: rtd (pt-100), thermocouple (fe-k/j-type), and/or thermistor (ntc).display: 3 digit led/lcd digital display (typically 200mv fsd). temperature source: portable water kettle or heater block.signal conditioning: on-board circuitry for amplification, linearization, and cold junction compensation.test points: multiple 2mm/4mm banana sockets for monitoring input/output signals.power supply: 230v ac, 50hz, single-phase.accessories: includes a glass thermometer, ntc thermistor probe 10k, k-type thermocouple probe, patch cords, and instruction manual., sim reader trainer kitsim compatibility supports 2g 3g 4g lte sim cards,sim reader mode: reading writing gsm sim card data, imsi, ki codes, phonebook interface usb 2.0 or rs 232 serial port for pc communication.clock frequencies: selectable frequencies 3.579 mhz, 7.159 mhz, 14.318 mhz for sim card operation.power supply: onboard smps 12v 2a or 5v dc with overload protection. hardware components:6-pin or 8 pin sim card socket.led indicators for power, sim reset, and data activity.optional lcd 128x64 and keypad 20 keys for standalone operation. software tools support for at commands gsm etsi 07.0707.05, sim manager utilities, and data logger functionality. common trainer kit featuresfault simulation ability to create faults e.g., sim not detected, vcc failure for troubleshooting.test points: multiple test points e.g., 55 nos for observing signals sim rst, clk, i o via oscilloscope.construction tested glass epoxy pcb, often housed in a study educational case., dual output regulated dc variable power supplydual output regulated power supply- input voltage: 230v/50hzac- output voltage: (0 30v)dc- output current: (0 2a)dc- protection circuit: over voltage and over current protection, short-circuit protection- high efficiency: greater than 85%- low ripple and noise: less than 50 mv, lvdt sensor trainer kitac mains power supply : 230v 10%, 50hzfixed regulated dc power supply : +5v, 12v 500matransducer : lvdtlvdt displacement : 20mm (40mm total)displacement scale : linear 20mmdisplacement display (mm) : red color 3 digit led displayexcitation frequency : 4khzexcitation voltage : ac variable 5v, dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc, accuracy: class 0.5( 0.5 % full-scale), dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc, accuracy: class 0.5 ( 0.5 % full-scale)