Latest ornamental grill Tenders | Government ornamental grill Tenders

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

State Government

CTN :45706575

17 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of 2 200ul 1000pk , microtube stand polygrid 2ml , mittens , nitrile gloves , nitrile surgical gloves , parafilm dispenser , parafilm m size 4 125 bemis , parafin tapes , pasteur pipette , pcr blockes semi skirtnatural st , ph strips , pipette bulb , pipette bulb sellicon rubber cap , pipette controller , pipette pump size 10ml , pipette rack horizontal , pipette stand , plastic color filter , plastic tray table , reagent bottel wide mouth 250ml , reagent sprayer for tlc bulb 100ml , retort stand base 51 2 9with 4b rod , rneasy mini kit , round bottom tubes caps 50ml , rubber stoppers no 9 , rubber stoppers no 5 , rubber stoppers two hole no10b diam 26mm , rubber stoppers no 10bdiam 26mm tdiam , rubber stoppers two hole no 9bdiam 215mm , rubber stopperstwo hole no5 , screw cap centrifuge tube capacity 50ml , screw gauge , sealing wax chapdq red , separating funnel holder , shoe covers , shove cover , silica crucible , sliding caliper , spatula one side flat s ssize 5 , spatula size 150mm , spatulan8 ss micro , spirit lamp , spreading caliper , sterile single layered syringe filter , storage vial, 500 vialspack , surgical blade , surgical blade holder , surgical disposable mask , surgical disposable mask 1pk , syringe filter nylon 25mm 022um 100pk , t diam 30mm ht 33mm , tdiam 28mm ht 31mm , tags tough , teflon tap champion size , test tube basket 230x230 , test tube baskets 160mm , test tube brushes , test tube holder , test tube peg rack 96 places 4pk , test tube rack 25d 40h , test tube stand 13x90 , test tube stand 20 places 4pk , test tube stand 3 tier polypropylene 25mm , test tube stand 3tier , tissue paper , tongs ss , tripod stand , tripod stand large , tripod stand plastic , tweezers ss , unersal clamp , universal combi rack 4pk , universal micro tip box2200ul 10pk , universal micro tipbox 02 10ul 10pk , universal micro tips box 200100ul 10pk , utility tray , wash bottle new type 500ml 6pk , washing bottles , waste disposal bags plastic , wire mesh 22.5mm ht 23mm, absorbent cotton roll, alumina annealing boats high temperature compatible, alumina annealing boats high temperature compatible, alumina annealing boats high temperature compatible, aluminium foil silver roll, aluminum foils, animal cage poly lab, aspirator bottle with stopcock, barrier tips xl max cap 10la749xl, beakers with handle measuring jugs, blotting paper sheets pk of 100, boss zinc alloy with nickle plated, bouffant head cap, brush beaker nylon bristles on, brush beaker nylon bristles on wire , brush bottle, brush bruette head, brush for cleaning , brush semi micro test tubes, brush test tube, brush, beaker, centrifuge tubes, centrifuge tubes, chemware boiling stones, clamp 3 prong, container 50ml sterile , coplin jar, copper strips , cotton ply face masks, cotton rolls, crime scene tape, cryo box microcentrifuge tube, dish crystallizing with spout , disposable cap, droppers, dropping bottle, duplicating ink black, eppendorf holder, eppendorf tubes, eppendorf tubes, falcon tubes, filter paper, filter tips bulk 1000ul 500pk, fingerprint brush, flask suport polypropylene, float rack for cryo vial 6units, forceps , fto coated glass, gauze iron size , gen tip, universal, 100-1000ul, gen tip, universal, 1-200ul, glass beads undrilled 500gm, glass stoper (size 19)hollow hexagonal head, hand gloves, hand glves het restiance 1pair, ito coated glass, lancet device with pricking needle with 100pcs, magnetic stirrer beads 6 x 12, magnifying glass, magnifying glass, makeup brush, manual //bid details 2 / 128

CTN :45468027

29 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For bid to ras supply of floor trap of 75mm dia with grating , pvc swr gully trap of size 110mm dia , pvc pipe 100mm bore 20ft long , pvc swr 110 mm dia pipe with three socket , stainless steel storage racks , stainless steel serving platform , stainless steel vegetable cutting table , preparation table , deep freezer of 200 ltr capacity , grill cage , chula , dining table , dining chair , synthetic enamal paint dark brown 4ltr pack , synthetic enamal paint og 4ltr pack , thinner , painting brush 50mm , painting brush 100mm , painting brush 125 mm , cement base paint weather proof , gi plate 600mm x 600mmx 6mm thick , ci cover of size 290 x 290 x 6 mm , glpipe 40 mm dia medium grade 04 m , gi strip of size 25 x4 mm 08 m , salt , ms funnel with wire mesh 01 no , gi pipe 20mm dia med grade , gi reducer 40 x 20 mm isi marked , ms rod 6 mm dia 2 long , charcoal dust , 5 mm dia 30 mm long gi bolt with nut , air termination single pointed copper rod 12mm dia and 300mm long , gi pipe 100mm dia 2 m lomg medium grade with base plate , back fill compound , ci manhole cover of size 30cm x 30 cm with handles , aluminium strip 25 x 3 mm , gi strip 32 x 6 mm rm 03 , insulator for fixing down conductors as per relevent is 25 nos , vitrified floor coloured tiles , anti skid coloured floor tiles , perforated type gypsum board false ceiling panel , kota stone flooring 25 mm thick , mild steel chromium plated 25 mm dia and 3mm thickness drapery rod , integral water proofing compound , white or coloured cement to match the floor finishes surface , fire extingusher one kg capacity , drill bits 3 mm size , drill bits 6 mm size , drill bits 8 mm size , drill bits 10 mm size , drill machine high speed heavy duty qty , hacksaw frame with 5 bladeboth side teeth , screw driver blade length 300 mm, blade dia 6 mm qty , hammer , magnetic nut setter of size 8mm , parthal wooden planks for shuttering , circular tile cuting machine with 5 blade , panel steel cuting dimond blade , aluminium planer for mason , brick trowel , brick hammer , insulated plair side cutting 250 mm , measuring tape 30 mtr long , water level pipe l equal to 20 mtr qty , bonding adhesive , mild steel material handling trolley

State Government

CTN :45696549

06 Jul, 2026 NA

Krishnanagar - West Bengal

Tender For selection of local market rate for various items of work forpreparation of scheme estimate for implementation ofmgnrega & vbgramg schemes. --thermocol 12.5 mm thick., polythene sheet (150 gm per sqm)150 microns (or 0.15 mm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank (without prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank(with prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank( with prop (30mm 37 mm ) including all fittings ., hire charges of vibrator (needle type 40 mm), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail (size1" to 2.5"), 1220. wire mesh (rabbit), glue (fevicol), 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates(size 5mm to 10mm), unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs)(specification- as per amc including fitting & fixing), display board(community)(specification- as per amc including fitting & fixing), g.i. wire(weight 100 mtrs/. kg), coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior) normal, cement primer(exterior)water proof, primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings conforming to is-13592-1992 (a) (i) single socketed 3 meter length (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings conforming tois:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining withjointing materails (spun yarn, valamoid/bitumen/m-seal etc) complete. a) upvc pipes: (ii) 110 mm. dia., b) upvc fittings: a) plain tee (ii) 110 mm. dia., d) shoe (ii) 110 mm. dia, colour interlock c.c paver block ( 60 mm thick interlocking designer concrete paver block m-35 grade ), precast chequered cement tiles 22 mm thick dark shade using, precast chequered cement tiles 22 mm thick medium shade, upvcbend 87.50, 110 mm bend, upvc pipe clip 110 mm bend, check valve 32mm, check valve 40mm, bamboo 25 mm dia 2.5 meter long, bamboo ( 8 cm- 10 cm dia) including fixing, polyethylene water storage tank with cover and suitable locking arrangement ., supply of g. i. pipes of tata make including necessary sockets - 15 mm dia.(medium quality), supply of g. i. pipes of tata make including necessary sockets - 25 mm dia.(medium quality), chlorinated polyvinyl-chloride(cpvc) pipe 25mm outer dia., chlorinated polyvinyl-chloride(cpvc) pipe 15mm outer dia., 15 mm ptmt bib cock, ptmt push cock 15 mm dia, mirror of superior make glass 60x45 cm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (withfittings, accessories and flush pipe), upvc pipes (w

corporations/Associations/Others

CTN :45667085

29 Jun, 2026 NA

Faridabad - Haryana

Tender For fire work at esic haryana. - (a) supplying, installation, testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required :(b) horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520.(c) suitable hp squirrel cage induction motor, tefc, synchronous speed 1500 rpm, suitable for operation on 415 volts, 3 phase 50 hz, ac supply with ip 55 protection for enclosure, horizontal foot mounted typewith class-f insulation, conforming to is-325.(d) m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) suitable cement concrete foundation duly plasteredwith anti vibration pads., 2280 lpm at 70 m head, (a) supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required:(diesel driven pump)(b) horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520.(c) suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulatedwith 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event offault with audio indications, painted with post office red colour etc. as required.(d) m.s fabricated, common base plate, coupling, couplingguard, foundation bolts etc. as required.(e)suitable cement concrete foundation duly plasteredand with anti vibration pads., 2280 lpm at 70 m head, (a) supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (jockey pump)(b)horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to is : 1520.(c) suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase 50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class-f insulation, conforming to is : 325.(d) m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) suitable cement concrete foundation duly plastered and with anti vibration pads., 180 lpm @70m head, fabrication, supply, insallation testing & commissioning of electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick crca sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per cpwd specification with following in coming and outgoings, suitable for operation on 415v, 3 phase, 50hz ac supply with enclosure protection class ip 42 as required :, incomings630a, 50ka 4 pole mccb, ics=100% icu rating digital voltmeter 0-500v with selector switch ammeter (0-630 a) with selector swtich & cts etc. led type ryb phase indicating lamps, on, off, trip indicating lamps set of copper bus bar 800amps outgoings (note : all outgoing feeders for pumps should have digital ammeter with selector switches, and led type on, off, trip indicating lamps)main fire pump200 amp, 50ka tpn mccb, ics=100% icu, with f

CTN :45657089

08 Jul, 2026 2.51 Crore

Meerut - Uttar Pradesh

Tender For supply of five saree with blouse , five peticoat , one chunari 2.25m , one pant fabric , one shirt fabric , one feta or gamchha , one dinner set , one cooker , one aluminium kadhai , one trolley bag , one vanity kit , one wall clock , one ceiling fan , one cool cage , one iron press , one double bed sheet with two pillow cover , two blanket , two mattress gadda with pu foam , two pillow , one sinhora , two dozen bangles , four kangan

CTN :45641952

03 Jul, 2026 NA

Sultanpur - Uttar Pradesh

Tender For group marriage item - 1. saree (including blouse) 5.50 meters each (1 bridal saree/lehenga, 2 embroidered, 2 printed) - best - quality quantity: 5 pieces 2. petticoat matching the saree, stitched - quantity: 5 pieces 3. chunari - embroidered (2.25 meters) quantity: 1 piece 4. pant fabric - branded, best quality (1.20 meter) quantity: 1 piece 5. shirt fabric - branded, best quality (2.25 meters) quantity: 1 piece 6. pheta/gamchha 2.25 meter qty: 1 piece 7. dinner set stainless steel (minimum 8 kg weight excluding packing) quantity: 1 set -- 8. pressure cooker 5 litre (isi mark) - quantity: 1 piece 9. kadhai - aluminium (05 kg weight) - qty: 1 no 10. trolley bag size: 47x28x66 cm (branded, best quality) - quantity: 1 piece - 11. vanity kit - quantity in fiber box: 1 piece 12. wall clock - branded, high quality quantity: 1 piece 13. ceiling fan 1200 mm (branded, best quality) quantity: 1 no. 14. cool cage 10 liters (branded, best quality) - quantity: 1 pc 15. iron press - branded, best quality - quantity: 1 piece 16. bedsheet umbrella bed size: 228.6 × 254 cm (including 02 pillow covers, best quality) - quantity: 1 piece - 17. blanket single bed double layer, size: 160 × 230 cm (best quality) quantity: 2 nos 18. mattress single bed pu foam mattress with cover (size: 182.88 × 91.44 × 7.62 cm) - qty: 2 - 19. pillow - size: 45.72 × 68.58 cm (best quality) quantity: 2 pieces 20. singhora traditional wedding item qty: 1 piece 21. bangle red glass quantity: 2 dozen 22. bracelet lacquer material quantity: 4 pieces

CTN :45632740

06 Jul, 2026 5.00 Lacs

Sultanpur - Uttar Pradesh

Tender For tender for 3phase induction motor stator rewinding 5hp 960rpm , 3phaseinduction motor stator rewinding 7 point 5 hp 960rpm , 3phase induction motor stator rewinding 10hp 960rpm , 3phase induction motor rotor rewinding 10hp 960rpm , 3phase induction motor stator rewinding 15hp 960rpm , 3phase induction motor rotor rewinding 15hp 960rpm , 3phase induction motor stator rewinding 25hp 960rpm , 3phase induction motor rotor rewinding 25hp 960rpm , 3phase induction motor stator rewinding 5hp 1440rpm , 3phaseinduction motor stator rewinding 7 point 5 hp 1440rpm , 3phaseinduction motor stator rewinding 10hp 1440rpm , 3phase induction motor rotor rewinding 10hp 1440rpm , 3phase induction motor stator rewinding 15hp 1440rpm , 3phaseinduction motor rotor rewinding 15hp 1440rpm , 3phaseinduction motor stator rewinding 25hp 1440rpm , 3phase induction motor rotor rewinding 25hp 1440rpm , 3phase induction motor rotor rewinding 100hp 1440rpm , 3phase induction otor stator rewinding 100hp 1440rpm , slipring and squaral cage induction motor stator rewinding 120hp 1440 rpm , slipring and squaral cage induction motor rotor rewinding 120hp 1440 rpm , slipring and squaral cage induction motor stator rewinding 100hp 960 rpm , slipring and squaral cage induction motor rotor rewinding 100hp 960 rpm , excitor armature field for 1500 kw ac alternator armature 45point 9kw , excitor armature field for 1500 kw ac alternator armature 25 kw , three speed cf motor 200 or 400 or 960 rpm jyoti land make three speed , sumersable pump squarel cage motor 15 hp 2900 rpm , sumersable pump squarel cage motor 20 hp 2900 rpm , air cooler welding transformer primary coil , air cooled welding transformer secondary coil aluminium , rewinding of celling fan , rewinding of tuloo fan , single phase 3phase exhasust fan size 16inch , single phase 3phase exhasust fan size 18inch , single phase 3phase exhasust fan size 24inch , dyno drive coil rewinding with material , 250 hp motor stator repairing rewainding

CTN :45635436

06 Jul, 2026 13.30 Crore

Krishna - Andhra Pradesh

Tender For large scale renovation and alteration of aging infrastructure of iitm campus and desiting of lake at discovery campus. sh providing and fixing aluminium doors and aluminium ornamental grills in the corridor areas at jamuna, alakananda, godavari, saraswathi, narmada, tapti, brahmaputra, krishna and cauvery hostels at iit madras campus, chennai-36subwork/packages:providing and fixing aluminium doors and aluminium ornamental grills in the corridor areas at jamuna, alakananda, godavari, saraswathi, narmada, tapti, brahmaputra, krishna and cauvery hostels at iit madras campus, chennai-36

CTN :45605463

25 Jun, 2026 2.47 Crore

Multi City - Karnataka

Tender For comprehensive development of parks playgrounds and buildings by providing pathways ornamental grill lighting works play equipments gym equipment tensile membrance and other balance works to parks palygrounds and buildings in chickpet assembly constituency

Ornamental Grill Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others