Latest ornamental light Tenders | Government ornamental light Tenders

corporations/Associations/Others

CTN :39856164

24 Apr, 2025 16.67 Lacs

Nellore - Andhra Pradesh

Tender For corrigendum : providing ornamental lighting with 7 mtrs double arm brackets and cl bottom poles with 110 watts led lights from puchalapalli sundaraiah statue to bose statue of nmc

corporations/Associations/Others

CTN :39856166

24 Apr, 2025 69.51 Lacs

Nellore - Andhra Pradesh

Tender For corrigendum : providing ornamental lighting with 7mt double arm brackets and cl bottom poles with 110w led lights from rtc complex to gandhi statue of nmc.

corporations/Associations/Others

CTN :40024290

30 Apr, 2025 57.74 Lacs

Nellore - Andhra Pradesh

Tender For providing ornamental lighting with 7 mt double arm brackets and ci bottom poles with 110w led lights from nallapa reddy srinivasulu reddy statue to dycus road centre in division no. 29

CTN :40008388

25 Apr, 2025 NA

Udhampur - Jammu And Kashmir

Tender For procurement of mt spares - mg spares part :, bolt, bolt frt hood hinge, bolt, bolt, bolt no 2, screw, screw, screw, screw, screw, screw, screw, screw, pin, ball, ball, ball case, nut, nut, nut, washer, lock washer, key, bolt no 2(8x120), bolt (10x18.5 ), bolt no 1 (8x100), screw, bolt lever locating (10x18.4), nut, nut rh, nut lh, nut, nut, thrust washer no.3 (t. o.8), thrust washer no 2(t 0.7), thrust washer no 1(t 0.6), thrust washer no.2 (t :1.0), thrust washer no 3(t:1.1), thrust washer no1 (t :0.9), (deleted) lock washer, washer, thrust washer, washer, washer t/m oil level plug, gasket, gasket, spacer (8x12x15), spacer, shim (t.1.15), shim (t-1.18), shim (t.1.21), shim (t.0.30), spring pin reduction frok, pin, spring pin gear, plug oil filter, plug oil level, plug, cap choke cable, plug timing belt outside cover, roller shaft sft interlock, bearing frt wheel, o ring, o ring distributor case, o ring guide oil level gauge, o ring, o ring oil strainer, o ring, oil seal, oil seal, oil seal, seal valve stem, bush, bush sprg shackle, cushion front, cushion case, hose water by pass, circlip axle shaft, circlip main shaft rr, circlip, e ring, clip heater hose, clamp, clamp heater hose, spring inner, spring outer, spring select return, spring axle housing breat, absorber assy rear shock, absorber assy front shock, spring, spring, bulb (12v 3.4w), bulb(12v 1.4w), bulb turn signal (12v 21w), bulb 12v 21/5w, bulb (12v 5w), bearing input shaft, pully crank timing belt, tensioner comp timing belt, gangue water temperature, gauge assy water temp, head lamp assy, lamp assy fornt fog, lamp assy comb rh, boot lever no1, shaft input, shim input shaft (t:0 3), gear counter, shaft counter, retainer output shaft, shim output shaft (t:0.1), shim output shaft (th:0.3), support open spring, latch assy front door rh, latch assy door rh, (deleted) latch assy front door lh, latch assy door lh, handle lock, cover gate handle, stricker lock, spacer, handle inside rh, handle inside lh, regulator assy frt dr window lh, joint rubber, bush column, rubber seal, dumper assy steering, connector tie rod end, tie rod steering, (deleted) rod assy steering drag, pad, (deleted) piston/cup set, bulb head lamp 12v 45/ 40w, fuse 15 amp, spark plug (champion rc 8 yc), spark plug, jet second, jet pilot, wrench spark plug, light assembly indicator, lens rh, lens lh, lens turn signal, lens tail stop, lamp assy room, lens back up rh, lens back up lh, harness assy wiring no.2st, harness assy wiring no.2, weather strip door outer, strap inside, scrape inside, glass wind shield, glass front door rh, glass front door lh, weather strip wind shield, weather strip door rh, trim operating extension assy, weather strip door lh, hub front drive clutch, sleeve front drive clutch, fork front drive shifting, handle jack, checking tool set, 3m way joint & hose, gasket & reservior, washer fr disc flexible hose, spring hold down, piston cup/boot set, spring tensioner, valve intake, valve exhaust (4 valve mpfi), seal valve stem, weather strip back door opening, mirrror assy out rear view rh, mirror assy inner rear view, cushion assy rh front soft top, cushion assy lh front soft top, back assy rh, back assy lh, tie rod end remover, bearing installer, steering pinion bush, side brg remover, wrench oil filter, oil pressure gauge, fork reduction shifting, boot lever no.1, gear speedometer drive, bolt spdom drive gear, pin, tank assy fuel, jack assy, jack assy, weather strip door rh, wheather strip back door, liquid gasket three bond 1207c, engine valve set of inlet and exhaust, shoe set rear brake, spring shoe return no.2, lock assy steering, switch assy change over, switch assy backup lamp, switch 4 wheel drive, switch assy stop lamp, switch assy oil pressure, gasket case front, mounting rh front/lh, mounting rh rear, nut, washer, spacer, oil seal, oil seal, o ring, o ring, spring, carburator assy, valve assy needle, float, jet assy slow, valve lifter, piston ring compressor, vaccum

corporations/Associations/Others

CTN :39856168

18 Apr, 2025 1.26 Crore

Nellore - Andhra Pradesh

Tender For corrigendum : providing ornamental lighting with 7mt double arm brackets and cl bottom poles with 110w led lights on podalakur road up to gowtham reddy statue of nellore municipal corporation.

Co-operative

CTN :39914490

16 Apr, 2025 14.0 Thousand

Mehsana - Gujarat

Tender For supply of led bulb and lamp holder - 3010767, 60.000, lamp holder,manufacturer-teknic,type-2lhbr,voltage rating-230v ac,additional information -pilot lamp,with lamp - 230 v ac, 20 ma,colour- red with push button, 3011460, 15.000, lamp indication min incandescent,manufacturer-diamand,cap-bc,voltage rating-24v ac,power rating-30w,additional information-clear lamp, 3012762, 50.000, led bulb 15w,details-srl-15w-mg,input power -15w,input voltage- ac 90 300v,colour temp. - 3000k-4000k-6500k,cri- more than 80,beam angle->200deg,lumens - 450,operating temp -20deg to 60deg centrigrade,base- b22/e27,size(mm)- 55 x 115,make-only syska led., 3010767, 60.000, lamp holder,manufacturer-teknic,type-2lhbr,voltage rating-230v ac,additional information -pilot lamp,with lamp - 230 v ac, 20 ma,colour- red with push button, 3011460, 15.000, lamp indication min incandescent,manufacturer-diamand,cap-bc,voltage rating-24v ac,power rating-30w,additional information-clear lamp, 3012762, 50.000, led bulb 15w,details-srl-15w-mg,input power -15w,input voltage- ac 90 300v,colour temp. - 3000k-4000k-6500k,cri- more than 80,beam angle->200deg,lumens - 450,operating temp -20deg to 60deg centrigrade,base- b22/e27,size(mm)- 55 x 115,make-only syska led.

Central Government/Public Sector

CTN :39920751

26 Apr, 2025 5.05 Lacs

Korba - Chhattisgarh

Tender For procurement of spares for prabhu make nflp ht starters open tender - pt 40va sec 0_8_12v pri 0-110v_part_no_ht_206 , under voltage relay_part_no_ht_2000 , pilot relay 12v dc_part_no_ht_2200 , resin cast pt 750va 3_3kv_110v_part_no_ht_300 , 72 sq mm ammeter supressed scale_part_no_ht_1000 , 72 sq mm voltmeter 0_5kv_110 volts supressed scale_part_no_ht_1100 , resin cast moulded ct for ammeter 3_3kv_part_no_ht_650 , resin cast moulded ct for ol 3_3 kv_part_no_ht_600 , lamp holder with lamp for starter_part_no_ht_1400 , push button with element for start stop test and reset_part_no_ht_1300 , hrc fuse base and carrier for control_part_no_ht_1200 , hrc fuse link 4 amp for control_part_no_ht_1201 , aux switch for vacuum contactor 2no_2nc_part_no_ht_205 , aux contactor 3no_1nc 110v ac_part_no_ht_208

Central Government/Public Sector

CTN :39883980

17 Apr, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of integrated led pilot lamp suitable for operating at 110 v dc. similar to reference no-rcb 7 - ivl 74 (red colour) of c & s make- c &s, siemens, havells, l & t, bussman or equivalent. [ warranty per iod: 24 months after the date of delivery ]

CTN :39572304

15 Apr, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supply of 61 lines of mafi spares - two pin plug 300mm , aluminiun reflector , base plate , constant current regulator 10kva , constant current regulator 15kva , constantcurrent regulator 4kva , lower breakable coupling , dummy plate with gasket and bolts , 200w 6.6a bi-pin halogen lamp , lamp 105w 230v , o ring gasket 219.3x5.7 , o ring gasket a6x2 , gasket for prism , medium power npn silicon , auxilary contractor , rf cable for near field monitor , 8bit parallel load shift , 8bit shift register 74hc595 , microcontroller at90can128 , ils-asd interface cable , fan , lamp , microcontroller , dp83848 ethernet , serial input latched drivers mic5841 , bat 1 coin type , cb sp 5amp , ep5352 regulator , ft232rl , max3381ee , unit , router , integrated access router , wifi , power supply module mdr 120-12 , rvr power supply module mdr 40-12 , frangible bolts of electrical panel , variable lamp control , checking stick base plate , ccr 25kva , riu , kvm switch with integrated display , dat 72 cleaning tape , hard disk for server , radios , smps 350w compatible , ac adapter , smps 550w compatible , 8 port l-2 ethernet switch , dme distribution box , dme lp transponder , rt con , hmi 320 operator panel , red pilot lamp , green pilot lamp , yellow pilot lamp , blue pilot lamp bid number/ & ( * ) : gem/2025/b/5845721 dated/ + : 05-03-2025 bid document/ 2 2 1 / 51

CTN :39841423

21 Apr, 2025 36.50 Lacs

Panchkula - Haryana

Tender For disposal of list comprising of items from sr. no. 1 to 437 (single lot of 437 items) - the assistant director (tech.), govt. industrial dev centre for tool and dies and anodizing, jagadhari - hmt horizontal milling m/c, model fn2h with tool/ acc., roll grinding machine with tool/ accessories and two additional panels:- i) (bch make 4.8 kw dated 28-01-83) ii) (bch make 22 kw dated 28-06-83), i) r. s joist ii) wire rope type electrical hoist wire rope (fitted in hoist), i) hmt drill machine with accessories ii.) bench drill machine stand (m.s. angle ), i) gen set 48kw/60kva with acc. batteries, ii) heavy duty pedestal grinder gd-i with acc., bench grinder, jig boring machine with acc., universal measuring machine no.828 with acc., hmt universal cylindrical grinding m/c g-22 with acc., i) hmt heavy duty centre lathe m/c, model l- 45 with cutting tools/ acc. ii) electric hoist cap. 7.5 ton with platform 6.1x22 mtrs, fired furnace (53x36) with acc. [thermocouple, thermocouple, temperature indicator (digital)], i) pilot self raising portable genty crane stand cap. 5 m. ton without hoist ii) m.s garder/m.s plate & angle(fitted in genty crane stand) iii) electric hoist iv) wire rope with clamp (fitted in hoist) v) spur gear crane vi) trolley (overhead) vii) chain(fitted in crane), wire ropes( scrap), milling cutters (scrap), spanner set, loose spanner, surface block (marking block), nose plier, plier, universal protector combination set, file flat 10, steel almirah 50x30x17, type writer, vernier caliper 15cm, ms rack, rack, dp cutter 12dp no.7, toolkit consisting of 100mm dia cutter with arbor cutter 63mm, file flat 8, handle file wooden, pipe die with handle, pipe wrench, steel almirah78x40x21, steel rule12, oil cane, round die3/8 (broken), drill chuck with arbor, slitting saw cutter, tool holder 1/2", dog carrier 1, dog carrier, drill sleave, plier, bench vice, round die 5/8 (broken), circular table 400mm, spanner set, loose spanner, dial indicator, stand magnetic, digit micrometer 25-50mm code no. 193-102, file 10 with handle, m.s rack, carbide tipped centre, file, oil cane, file6, file, oil cane, tap set 3/8 (broken), drill chuck and drill chuck arbor, dog carrier 11/2, loose spanner, revolving centre, surface gauge (used) (marking block), outside inside caliper, m.s rack, flat file, flat file8, file 12, spanner set, try square, empty drums, steel almirah 78x40x21, screw driver 10, soldering iron, plier, pad lock, dial test indicator, dial test indicator, magnet stand- 7012 ii) pneumatic stand - 7015, pocket calculator, m.s rack, file8, digit micrometer 50-75mm, drill chuck, drill stand, steel tool cabinet765x435x1170mm, bench vice, digit micrometer 0-25mm code no.193-101, vernier 6-150mm, carbide tipped centre, bench vice 6, carbide tipped centre, hand reamer 20mm, table lamp, end mill 22mm, end mill 20mm, depth micrometer 0-50 mm, empty cylinder (15kg), thickness gauge code 184-103, dial indicator, outside micrometer with dial indicator (25-50mm), tap set (broken), drill 4mm (broken), metric measuring tape, dial caliper 150mm, pitte space master traveling trolley with drafting chair, aristo calculator, flat file 12, chain pulley block (trolly) cap. 5ton with r.s joist, steel rule12, lock, hacksaw frame 12, drill 7mm, digit micrometer 75-100mm code193-104, vernier caliper6, m.s rack, wolf precision tool post grinder with internal grinding attachment, revolving centre, outside inside compass, plier, steel rule24, shell end mill 40x16x32, tool cabinet 765x435x1170mm, drill chuck, vernier caliper6-150mm, drill 5/16, wall clock, wall clock, steel tool cabinet, library table 8x4x21/2, equal angle cutter 80x20x22mm 600, equal angle cutter 63x16x22mm, end mill 22mm, pad lock, g plate, i) optical comparator pj-250 with acc. ii) tool maker microscope, dial indicator, end mill 20mm, outside micrometer 100-125mm, convex cutter 63x8x22mm, orpat calculator, out side micrometer 0-25mm, flat file 10, screw driver, heater, i) vernier callipe

Ornamental Light Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

Co-operative

Central Government/Public Sector

Central Government/Public Sector