Latest orthographic film Tenders | Government orthographic film Tenders

State Government

CTN :45675988

02 Jul, 2026 34.13 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to c & d type, varada block & arkaavathi block, koramangala, bengaluru from august-2026 to july-2027- item description: cleaning of water storage tank or sump by following method: (1) empty the tank/ sump and make it to near dry, (2) apply bleaching powder uniformally (@ tank capacity x 0.5 gms/litre) inside the tank/ sump and wait for one hour, (3) after one hour, clean/ rinse the tank/ sump with fresh water. repeat the process (2) & (3) for two to three times, all complete, as directed by the engineer-in-charge. , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia pipes , item description: providing pvc ringtite pipes conforming to is 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of pvc pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per iss (contractor will make his own arrangements for procuring water for testing) etc. complete for: pvc pipes 110mm dia., 6 kg/sqcm & class 3 , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 25 mm nominal dia pipes , item description: providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : rectangular shape 453x357 mm , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing unpl

CTN :45651662

02 Jul, 2026 3.81 Lacs

Payyanur - Kerala

Tender For amrut 2.0 tranche iii-development of childrens park - supply and installation of play and gym equipments - detailed specification, garden bench- supply, installation and fixing of heavy duty outdoor garden bench (3 seater, 1.50 m length) with cast iron designed side frames, fabricated using high-strength cast iron end supports with decorative and corrosion-resistant finish, and seating arrangement consisting of 1.50 m long ergonomically designed seat and backrest made of treated hardwood/hdpe/uv-resistant recycled plastic slats of suitable thickness, fixed securely to the cast iron frames using galvanized or stainless steel fasteners. the cast iron frames shall be properly finished, free from sharp edges, and coated with rust-proof primer followed by outdoor-grade epoxy/pu paint or powder coating for enhanced durability under outdoor conditions. the bench shall be designed for heavy-duty public use with stable anti-tip structure and provision for firm anchoring to the rcc foundation/pedestal using suitable foundation bolts or embedded fixing arrangement as per manufacturer s specification. the rate shall include all materials, labour, transportation, loading, unloading, erection, fixing, anchoring, testing and commissioning complete in all respects. the item shall carry a minimum warranty of 2 years against manufacturing defects and shall be supplied and installed as directed by the engineer-in- charge, suitable for parks, open gyms and public garden spaces (excluding cost of concrte foundation), kids slider - supply, installation, testing and commissioning of outdoor children s play equipment frp & gi pipe combo double slide with frp roof, suitable for children up to 12 years of age, comprising a dual slide structure with two slides oriented in different directions, fabricated using isi-marked gi pipes conforming to is 1239 for main support frame with minimum 100 mm od and 3.0 mm thickness, and intermediate members of suitable diameter with minimum 2.5 3.0 mm thickness. the sliding surfaces shall be made of high-quality uv-resistant moulded frp with smooth finish and rounded edges for safe play, and provided with a durable frp roof canopy for protection from sun and rain. the structure shall include anti-skid climbing steps made of frp/hdpe or textured ms/steel treads, ergonomic handrails with uv-resistant coatings, and all welded joints shall be smoothly finished and free from sharp edges or projections. the entire assembly shall be treated with rust-proof pre-treatment, epoxy primer and outdoor-grade polyester powder coating of minimum 80 microns thickness for enhanced durability. the equipment shall be designed for safe use by children up to 12 years of age and installed on rcc m20/m25 concrete foundation blocks as per manufacturer s recommendation, using stainless steel or galvanized fasteners with proper anchoring. the rate shall include all materials, labour, transportation, unloading, erection, fixing, anchoring, testing, commissioning and all incidental works required for complete installation. the item shall carry a minimum warranty of 2 years against manufacturing defects and shall be supplied and installed complete as directed by the engineer-in-charge(excluding cost of concrte foundation), swing set- supply, installation, testing and commissioning of outdoor gi a-frame double swing set (two-seater) with chain suspension system, suitable for children up to 12 years of age, fabricated using isi-marked gi pipes conforming to is 1239 for the main a-frame structure with minimum 100 mm od and 3.0 mm thickness, and other supporting members of suitable diameter with minimum 2.5 3.0 mm thickness. the a-frame shall be designed for high stability and structural safety with properly braced side members and cross members, and provided with two child-safe swing seats made of hdpe/lldpe or frp with anti-skid surface and rounded edges for safety. the seats shall be suspended using heavy-duty galvanized steel chains of adequat

CTN :45346400

22 Jun, 2026 NA

Pondicherry - Pondicherry

Tender For rate contract for supply of consumables and non-consumables for the department of central workshop, puducherry – 605 006 - terms and conditions: 1. for non-consumable items, the brand name should be mentioned for each item. those quotations without brand name will be rejected. 2. the items should be door-delivered to the department of central workshop without any charge (loading / unloading charge, etc.) 3. the expiry date of consumables should not be less than one year after the date of supply. 4. price quoted should be inclusive of gst. 5. the firm should provide warranty for 1 year for the non-consumable items. general section, aluminium sheet 16 swg 8x4 length (isi), m.s.sheet 20g (isi) 8x4 length, m.s.sheet 18g (isi) 8x4 length, m.s.sheet 10g (isi) 8x4 length, m.s.sheet 16g (isi) 8x4 length, steel almirah thread type handle with washer & nut isi marked, godrej push type steel almirah handle, steel almirah locks & key branded make, steel alimarak godrej lock with key branded make, steel alimarah handle inside fix gun metal with brass revit square type, lock with key for steel table isi marked, drawer handle for steel table, stainless steel wire 8swg (length 20ft), stainless steel wire 12swg (length 20ft), stainless steel wire 15swg (length 20ft), ss pad lock 6" l, ss pad lock 4" l, ss pad lock 3" l, ss pad lock 2" l, ms pad lock 6" l, ms pad lock 8" l, m.s.welding rod 10 swg isi make, m.s.welding rod 12 swg isi make, s.s.welding rod 12 swg isi make, s.s.welding rod 10 swg isi make, s.s.welding rod 14 swg isi make, 14" cutting wheel, welding hand shield, welding glass with both sides safety glass. (safety glass+welding glass+safety glass), chipping hammer, wire brush, welding electrode holder, 1" x 1" m.s.square pipe 18 gauge (20 feet length) (isi), 7/8" m.s.round pipe 16 gauge (20 feet length) (isi), 3/4" m.s.channel (20 feet length) (isi), 1" x 1/8" m.s.angle (20 feet length) (isi), 3/4" x 3/4" m.s.square pipe 14 gauge (20 feet length) (isi), 1 1/4"x 1/8" m.s.angle (20 feet length)(isi), 8mm m.s.round rod (20 feet length)(isi), 8mm s.s.round rod (20 feet length)(isi), 1" x 1/8" m.s.flat (isi)(kg), 3/4" x 1/8" m.s.flat(isi) (kg), 1 1/2" x 1/8" m.s.flat (isi) (kg), m.s.rod 30mm dia 20 feet length, s.s rod 2.5 mm (20 feet length), s.s rod 6 mm (20 feet length), 2"x1/8 m.s flat (kg), bolt nut with washer 3/16"x1"l nickel coated (kg), bolt nut with washer 3/16"x11/2" l nickel coated (kg), bolt nut with washer 3/16"x2"l nickel coated (kg), 1/4" x1" m.s. bolt, nut with washer nickel (kg), 1/4" x11/4" m.s. bolt, nut with washer nickel coated (kg), 1/4" x11/2" m.s. bolt, nut with washer nickel coated (kg), 1/4" x2" m.s. bolt, nut with washer nickel (kg), 5/16" x 1" m.s.bolt, nut with washer nickel (kg), 5/16" x 11/2" m.s.bolt, nut with washer nickel (kg), 5/16" x 2" m.s.bolt, nut with washer nickel (kg), 3/8" x 1" m.s bolt, nut with washer nickel (kg), 5mm x 25mm g.i.coated bolt,nut with washer (kg), 25mm i.d washer with 3mm thickness (kg), nylon bush round type 3/4", nylon bush round type 1", nylon bush round type 1 1/4", nylon bush round type 1 1/2", nylon bush square type 3/4", nylon bush square type 1", nylon bush square type 1 1/4", nylon bush square type 1 1/2", 3/8th (30mm-1 1/4") plastic moulded star head male clamping knob, carpentry section, commercial ply wood 3mm water resistent isi marked(8x4) (sample to be provided), commercial ply wood 6mm water resistent isi marked (8x4) (sample to be provided), commercial ply wood 10mm water resistent isi marked (8x4) (sample to be provided), commercial ply wood 12mm water resistent isi marked (8x4) (sample to be provided), commercial ply wood 18mm water resistent isi marked (8x4) (sample to be provided), one side teak ply wood 18mm water resistent isi marked (8x4) (sample to be provided), one side teak ply wood 12mm water resistent isi marked (8x4) (sample to be provided), one side teak ply wood 6mm water resistent isi marked (8x4) (sample to be provided), one side teak p

CTN :45305833

08 Jun, 2026 35.94 Lacs

Faridabad - Haryana

Tender For beautification works in including play equipment, open gym, plantation and repairing of boundary wall at brahampuri park saran village boosting park in ward no. 09 nit faridabad.(recall) - labour charge for making tee connection with existing line excavation, cutting jointing and making connection with existing line complete in all respect, supply and fixing of pvc tee 150x150x150mm dia., chain swing (2seater): 10 l x 6 w x 8 .5 h. horizontal frame and vertical legs is of m.s. pipe 2 x 12 gauge. it stays with m.s. pipe 1 x 12 gauge. swinging seats-2nos is of frp molded seat of 2mm thick fitted with m.s. pipe frame x 12 gauge which hang with m.s. chain 6mm thick duly plated with ball bearing and m.s. flat 6mm thick housing. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., sea saw (4seater): - 8 l x 5 .5w x 15 high. frame is of m.s. pipe 2 x 12 gauge. sitting planks is of m.s. pipe 2 x 12 gauge and its cantilever and handles is of m.s. pipe x 12 gauge. sitting seats 4 nos. is of molded frp material in 3mm thick with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and labor at site., bridge ladder: 10 l x 2 w x 6 h. horizontal ladder is of m.s. pipe 2 , andamp: vertical ladder is of same material of 12-gauge isi mark with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and amp: labor at site., merry-go-round (4-seater): 5 dia. main frame is of m.s. sq. pipe 2 x 2 x 14 g and having suitable handle andamp: foot-rest is of round pipe x 12 gauge. central pipe is of m.s. pipe 3 x 12 g with heavy duty shaft 50mm thick andamp: ball bearing assembly. it consists of 4no chair made of molded frp plastic. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., pvc reducer 150mm x 100mm.., frp dustbin (tilting type) of capacity 60 ltr. body is made of moulded fiberglass re-enforced plastic (non- halogen fire retardant resign) of 2mm thick having its lid with handle. it fitted with m.s. square pipe 1.25` x 1.25` x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with epoxy primer interseal 670 hs and pu finish (interthane 990) paints. complete item with gst. transportation, installation with cc and labor at site., making connection with existing sewer main line, p/f of pvc 100mm dia bend., supply of pvc pipe 150 mm dia with isi mark 8kg.cm2 pressure, supply of good earth complete as per site requirement, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class

State Government

CTN :44982266

08 May, 2026 NA

Amravati - Maharashtra

Tender For supply of providing and supplying to subdist hospmorshi rollar blinds ami , providing and supplying vertical blinds , providing and supplying cube main table assy 50mm thk mdf veneer , providing and supplying table of size1500lx750dx750ht top made from 25 mm prelaminated particle board , providing and supplying of main table at 3600lx1400dx750ht , supply, fitting and fixing of prelam table at 1500lx600dx750ht. with 2b1f pedestal at 400lx450dx670ht. , supply, fitting and fixing of prelam cabin at 1350lx600dx750ht. with 2b1f pedestal at 400lx450dx670ht , providing and supplying openable steel storage of 750 x 450 x 1200ht , supply, fitting and fixing of prelam cabin. at 1500lx600dx750ht. , supply, fitting and fixing of sos make metal storage , providing and supplying of book case with glass shutter at 825lx300dx1650ht , providing and supplying multiple compartment lockers at 1140lx 457d x 1830 mm , providing and arrangemnt of high back, synchronized mechanism , providing and arrangemnt of high back chair , providing and supplying adjustable seat height, armrest, locking mechanism , providing and supplying make wipro company. the seat and back , providing and arrangemnt of mid back, normal syncro mechanism , providing and supplying 4 legged lab stool, legs made of 16 guage , providing and supplying foldable alluminum ladder 1500 mm. ht. , providing and supplying of tea table 900mm x 750mm x 450mm with 12mm thick colour eitched tempered glass , providing and supplying 3 seater public seating chair made of complete metal , providing and supplying two seater tandem chair with metal seat and back , providing and supplying single bed of size 2025lx1000dx650h , providing and supplying dressing table of size 400lx 400dx 1800h. , providing and supplying ) /bid number : gem/2026/b/7417370 * /dated: 23-04-2026 & & / bid document 1 / 32 & & ' ' /item category bed side table of size 400lx 400dx 415h , providng and fixing factory finish 3 seater sofa made of imported red miraty ood , providing and supplying factory finish 1 seater sofa made of imported red miraty wood , providing and fixing slotted angle storage rack at 905l x 605 x 2400 ht , supply, fitting and fixing of prelam storage. , providing and supplying full height partitions in solid finish , providing and supplying 80mm to 85mm thick full height double skin partition up to 3 mtr height , providing and supplying of glass door and frame at 900mm x 2100mm , providing and supplying medium height partition at 1800 1200ht , providng and fixing in position anodised extruded aluminum partitions , providing and fixing in position, double shuttered aluminium , supplying single piece plastic moulded chair of size 510 mm x410mm x790 mm , providing and supplying storage of size 1600wx450dx650h in combination , providing and supplying fire exit and floor identification signage as per manufacturers specifications , providing and supplying ss braille buttons directional signage , providing and supplying of high intensity reflective conspicuity , providing a folding wheelchair of pioneer surgicals brand, model number ps 809 equivalent , providing and supplying free standing finish type natural burnt suitable , provinding and fixing signages of various size as per design of whit 6 mm , provinding and fixing maharashtra government department logo using wood platic composite or equivalent with exteriror colur and polish in size 6 feet x 2 feet , dust bin supplying dust bin of polypropelene material 10 lit , door mat supplying door mat of size 3 feeet x 2 feet , providing and supplying 25 mm thick bed side platform at 2200lx450d. , providing and supplying ss dining table with folding chair for dining , providing and supplying pre laminated particle board shoe rack, grooves and joints has made a reputed name

Central Government And Public Sector

CTN :44573987

11 Apr, 2026 NA

Lumding - Assam

Tender For tender for supply of dining table with 6 round seat ss cushioned chair make - ruddhania or similar as per item 1 of attached specificaiton document , wooden beside table made of wood with sunmica pasted make - decowell/featherlite/easy or similar as per item 2 of attached specification document , pvc chair with frame of plastic moulded set fitted with cushion of 60mm thick foam with minimum 1 year warranty make - supereme/nilkamal/featherlite/easy or sprint as per item 3 of attached specification document , dressing mirror framed with wood make - saint gobain or similar as per item 4 of attached specification document , office almirah with shelves facility make - godrej , jajodiya or similar as per item 5 of attched specification document , well furnished wooden bed make of water proof boards and quality laminates make - jajodiya/nilkamal or similar as per item 6 of attached specification document

Orthographic Film Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government And Public Sector