Latest orthopedic implant Tenders | Government orthopedic implant Tenders

Central Government/Public Sector

CTN :45681589

26 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of coach set of frames for seats and back rests of lws bw2 coach consist of the following 1) four seater frame to drg. lg61229,alt- nil- to quantity-20 nos, 2) single seater frame-rh to drg. lg61233,alt- nil- to quantity-10 nos, 3) single seater frame-lh to drg. lg61231,alt nil- to quantity-10 nos, 4) four seater backrest frame to assembly of frame and cushion support to drg. lg61234, alt-nil,item 1,2,5 and 6 to quantity-20 nos, 5) single seater back rest frame to assembly of frame and cushion support to drg.lg61237, alt -nil ,item 1, 2,5 and 6 to quantity-20 nos, 6) single seater(mounting) frame assembly- (double) to drg.lg61201, alt- d to quantity-8 nos 7) single seater (mounting) frame assembly- lh to drg.lg61202,alt -c to quantity- 2 nos, 8) single seater (mounting) frame assembly- rh to drg.lg61203, alt-d to quantity- 2 nos and 9) sleeve for single seater frame to drg.lg61219, alt-a to quantity-12 nos please visit icf vendor portal for downloading drawing https://vp.icf.gov.in/vendtendordetnew.php using key:0726c1i82tn1155 [ warrantyperiod: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45646932

07 Jul, 2026 2.33 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground-establishment of sports infrastructure facilities at kalavayal ground in puthenkurish grama panchayath in kunnathunadu lac, ernakulam- supply and installation of open gym equipment - retender - open gym equipments, od48095/2026-2027 rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) = 1472 x 915 x 1040 mm. upper and bottom pipes 88mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. handle - 33 mm od b class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages 48 mm od b class g.i. pipe. seat & back rest 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. foot resting pipe - 60 mm od b class g.i. pipe. end closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. pin 25 mm m.s. bright bar pin. circlips a 24 circlips are used for assembly. bearing bushes - 60 mm od seamless pipe / bar. bearing- use is 6005 permanent lubricated reputed brands. grips high quality rubber 46 mm od. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od48569/2026-2027 cross trainer (double) - supply and installation of double cross trainer having the following specifications: dimensions: (l x w x h) 2280 x 550 x 1650 mm. main frame- made of 88 mm od ?b? class gi pipe dually bending design. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od ?b? class gi pipe. handle - 33 mm od ?b? class gi pipe dually bending design. leg movement frame ? 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use for to support it. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s? pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od b class g.i. pipe. and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality rubber. bearing- use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25mm m.s. bright bar. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 80-100 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od48098/2026-2027 air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od "b" class gi pipe dually bending design.foundation plate- m.s. round plate of ø 250 mm & 8 mm thick. paddle ø 42 mm od round gi pipe. handle - ø 33 mm od "b" class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing cap's - pp / nylon / hdpe material. bracket - 8 mm thick laser profile is used to s

CTN :45646934

07 Jul, 2026 2.25 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground -development of jai hind stadium in njarackal grama panchayath in vypin lac, ernakulam district-supply and installation of open gym equipment - outdoor gym equipments, od268048/2025-2026 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od “b” class gi pipe. foundation plate –m.s. round plate of ø 250mm & 8 mm thick. foundations cover capdome shape of pp / nylon / hdpe material. remaining frame -made up of ø 48 mm od “b” class g.i. pipe. handle - made up of ø48mm od “b” class g.i. pipe. link - made up of ø 48 mm od “b” class g.i. pipe. seat & back rest – 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. bearing bush closing cap’s– pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap – dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin – made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips–a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268050/2025-2026 air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od ?b? class gi pipe dually bending design. foundation plate?m.s. round plate of ø 250 mm & 8 mm thick. paddle? ø 42 mm od round gi pipe. handle ? ø 33 mm od ?b? class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s -pp / nylon / hdpe material. bracket - 8 mm thick laser profile is use to support paddle frame. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brands. pin?s ? ø 25mm m.s. bright bar pin. circlips? a 24 circlips are used for assembly. bearing bushes -ø 60 mm od seamless pipe. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268054/2025-2026 rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) = 1472 x 915 x 1040 mm. upper and bottom pipes - 88 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. handle - 33 mm od b class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages 48 mm od b class g.i. pipe.seat & back rest 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. foot resting pipe - 60 mm od b class g.i. pipe. e

Central Government/Public Sector

CTN :45642667

20 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For online tenders are invited via the nprocureportal from reputed manufacturers, authorizeddistributors, or direct importers for the upperlimb orthopedic implant under rate contract(rc) for the year 2026-28 part 2 of 2

Central Government/Public Sector

CTN :45642668

20 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For online tenders are invited via the nprocureportal from reputed manufacturers, authorizeddistributors, or direct importers for the upperlimb orthopedic implant under rate contract(rc) for the year 2026-28 part-1 of 2

Central Government/Public Sector

CTN :45642669

20 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For online tenders are invited via the nprocureportal from reputed manufacturers, authorizeddistributors, or direct importers for the lowerlimb orthopedic implant under rate contract(rc) for the year 2026-28. part 4 of 4

Central Government/Public Sector

CTN :45642673

20 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For online tenders are invited via the nprocureportal from reputed manufacturers, authorizeddistributors, or direct importers for the lowerlimb orthopedic implant under rate contract(rc) for the year 2026-28 part 3 of 4

Central Government/Public Sector

CTN :45642674

20 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For online tenders are invited via the nprocureportal from reputed manufacturers, authorizeddistributors, or direct importers for the lowerlimb orthopedic implant under rate contract(rc) for the year 2026-28 part 2 of 4

Central Government/Public Sector

CTN :45643417

20 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For online tenders are invited via the nprocure portal from reputed manufacturers, authorized distributors, or direct importers for the lowerlimb orthopedic implant under rate contract (rc) for the year 2026-28.

CTN :45428018

22 Jun, 2026 5.00 Lacs

Raisen - Madhya Pradesh

Tender For corrigendum : orthopedics implants and other material purchase in dh raisen - ortho implants and other materials, interlocking nail for tibia- all sizes with 4 lockingbolt set, expert tibial nailing system (titanium) all sizessystem with all bolts set, distal tibia nail - all sizes with 4 locking bolt set, interlocking nail for femur - all sizes with 4 lockingbolt set, supracondylar nail - all sizes with 4 locking bolt set, distal femur nail multilock all sizes with locking bolts, proximal femur nail all sizes with all locking bolts -short and long, proximal femur nail a2 (stainless steel) - shortpfn /long pfn all sizes with locking bolt set, proximal femur nail a2 (titanium) - short pfn /long pfn all sizes with locking bolt set, proximal humerus multi lock nail- all sizes withlocking bolts, interlocking humers nail- all sizes with 4 locking boltset, k nail for femur- all sizes set, square nail radius with screw set (all sizes set), square nail ulna all sizes set, rush nail all sizes set, enders nail all diameter & sizes set, titanium elastic nailing system (tens)-all size (dia.2mm,2.5mm,3mm,3.5mm,4mm,4.5mm)(length 44 cm), ao trauma mini set - stainless steel andtitanium, ao trauma small set - stainless steel andtitanium, ao trauma standard set - stainless steel andtitanium, dynamic compression plate (d.c.p.small 3.5mm)radius/ulna complet set with screw, d.c.p.narrow for tibia / humerusall sizes with 4.5cortical screw compleate set, d.c.p.broad (4.5 mm )for femur - all sizes with 4.5cortical screw and screw hole set, l.c.p.plate small (3.5 mm) all sizes with locking screwhole set, l.c.p.plate narrow (4.5 mm) with screw complete set-all sizes, l.c.p.plate broad (4.5 mm) with screw complete set, reconstruction plate non locking 3.5mm- allsizes with 3.5 cortical screw set, reconstruction plate locking 3.5mm - all sizeswith 3.5 cortical screw set, reconstruction platenon non locking 4.5mmwith screw complete set, reconstruction plate locking 4.5mm with screwcomplete set, semi tubular plate 4-12 hole all sizes with screws holeset, one third tubular plate 4-12 hole all sizes withscrews hole set, clavicle lateral end plate with screws set, clavicle hook plate with screws set, clavicle locking precontoured plate 6-10 holewith locking screws set, proximal humerus locking plate (philos) set - 4-12 hole) plate with required locking screw set, distal humerus locking compression plate -medial &lateral(allsize with screw), lcp extraarticular distal humerus metaphyseal locking plate 4 to 12 hole (all size with screw), lcp radial head plate (all size with screw), locking olecrenon plate (all size with screw), hook plate olecranon plate (all sizes withscrews), distal radius locking plates (right / left) 4-8hole, distal radius t plate all sizes with screws, distal radius l plate all sizes with screws, distal radius locking plate variable angle 2.7mm and 2.4 mm system all sizes with screws, distal radius rim plate all sizes, mini plate and screws 1.5mm/ 2mm/ 2.7mm set for metacarpals and phalanges, dhs system with d.h.s.plate (round hole ) angle 125*, 130*, 135*, 140*, 145* short barrel 4-18 hole, long barrel 4- 18 hole, lag screw with compression screw 50-130 mmcortical screw (4.5 mm size 16mm-40mm), d.h.s.with trochanteric support plate with lagscrew comp.setall sizes (4-8 hole) & required cortical screws set, pfn with trochanteric support plate all sizes, proximal femur locking plate all sizes, femoral neck system (fns) all sizes, d.c.s.plate 95* 4 hole to 12 hole, angled blade plate - all sizes with screws, double angled blade plate with lag screwall sizes (4-10 holes) with required cortical screws set, pediatric d.h.s.all sizes with 3.5mm cortical screw set, distal femur locking plate (lateral) (dflcp) 6-18hole, proximal tibia locking plate (ptlcp) 6-15 hole, raft locking plate for proximal tibia setall sizes (5-8 hole) with locking screws, l buttress plate right/left all sizes with 4.5cortical screw set, t buttress plate right/l

Orthopedic Implant Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector