Outboard Roller Tenders

Get complete information related to latest Outboard Roller Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Outboard Roller Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Outboard Roller Tenders .

Filter

Loading....

Get Tender in Email

CTN :40146123

12 May, 2025 NA

Kanchipuram - Tamil Nadu

Tender For purchase of cane carrier chain assembly

CTN :40146204

12 May, 2025 NA

Kanchipuram - Tamil Nadu

Tender For purchase of cane carrier chain spares - cane carrier chain spares as per drg. no. mcsm007.material specification:1) side plate steel confirming to grade 55c8 of is 1875-19782) pin & bush: steel confirming to grade 16ni3cr2 of is 1570 (part-4) 1988.3) roller: en-8 through hardened.breaking load: the chain should withstand a minimum load of 40000 kgs.hardness: pin: 50+/- 5 hrc bush: 40+/- 5 hrc roller: 30+/- 5 hrclength accuracy: the finished chain should be accurate within +0.025 / - 0.0dimensions: the dimension of the cane carrier chain should be as per drawing no. mcsm-007the chemical analysis report of pin, bush, roller and side links breaking strength test report and hardness test report duly signed by the reputated laboratory should be produced along with supply.the chain should be heat treated as per isi., cane carrier chain spares: pin, bush, roller, inner link-a, inner link-b, outer link-a, outer link-b

State Government

CTN :40162210

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of c.i./c.s casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.

Co-operative

CTN :40120374

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For c s item on conversion supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg.supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b supply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate as per drg., c.s.trash beam as per is-1030/is 2708 as per drg.supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per deg no mh-17-c/04 side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b top roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder as per drg.blr-73/1 pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, c.s.sprocket for bagasse elevator (pilot bore) as per drg.mh-75 pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm , boss- 270x130 mm, cs sprocket (pilot bore ) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm,od 258.8mm, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for enter carrier teeth 12, as per drg. mh-72/sample, s.s. wear plate is 304 quality (i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg., c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg., pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg., clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-212 mm, pcd-198 mm, pitch- 18.84 mm, module-6 as per drg. no., pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, nos of teeth 12, as per drg. blr 32/93, chain sprocket for inter carrier clucth shaft, od 280, pcd 270, bore 108, root dia 260, nos of teeth 45, nos of hole 4, as per drg. 001, pinion for transmission gear kcp mill, material en-24(as per drawing no. mh-95/2024-25), c.s. helical teeth pinion, teeth-20, od-60, bore-26, pitch-10(as per drawing no. bh-rg-05/2024-25), c.s. helical teeth pinion, teeth-17, od-62, bore-28, pitch-13(as per drawing no. bh-rg-04/2024-25), chief engineer

Loading, Please wait...

Outboard Roller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Co-operative