Latest over head line Tenders | Government over head line Tenders

CTN :39657632

12 May, 2025 6.20 Crore

Kolkata - West Bengal

Tender For corrigendum : carrying out various instrumentation works for part a as per standard specification by providing all required materials in connection with the composite works for setting up of hpg-2, butene-1 and psa units at lepetkata, assam of m/s bcpl-instrumentation"pressure gauges and accessories (excl. supply of impulse pipe / tubing materials)"installation of line mounted or remote mounted or local gauge board mounted pressure gauge/ pressure gauge with pulsation dampener / syphon / over-range protector (direct / surface mounted / diaphragm seal type) inclusive of mounting of instrument, supply and erection of supports / tray, mounting on support (if support required), laying of capillary on tray, fabrication and installation of manifolds / impulse lines with supports as per standards indicated below, hydraulic testing and painting of supports but exclusive of supply of instrument, gauge board, yoke, piping material and calibration.in stainless steel as per standard 7-52-0432/1112in carbon steel as per standard 7-52-0432/1112in carbon steel as per standard 7-52-1222in carbon steel as per standard 7-52-1210in carbon steel as per standard 7-52-0433/1113in carbon steel as per standard 7-52-1120in carbon steel as per standard 7-52-0459/1158"pressure instruments (excl. supply impulse pipe / tubing materials)"installation of pressure transmitters/ pressure switches (with or without pulsation dampener, over-range protector)/ diaphragm seal type pressure transmitters/ diaphragm seal type pressure switches including mounting on yoke/ surface, supply of supports for capillary, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of supply of instrument, piping/tubing materials, all electrical/ pneumatic connections, yoke and calibration.in carbon steel as per standard 7-52-0437/0438/1131/1132in carbon steel as per standard 7-52-1222in carbon steel as per standard 7-52-1223in carbon steel as per standard 7-52-2103in stainless steel as per standard 7-52-1223in carbon steel as per standard 7-52-1143in stainless steel as per standard 7-52-1143"differential pressure instruments (excl. supply of impulse pipe/tubing materials)"installation of differential pressure transmitters (including one side capillary type)/ differential pressure switch(including one side capillary type)/ diaphragm seal type dp transmitters/ diaphragm seal type dp switch including mounting on yoke/ surface, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per standard indicated below, supply and fabricating of supports for capillary, laying of capillary on supports, painting, installation of flushing connection, hydraulic testing of impulse lines as per standard indicated below but exclusive of supply of instrument, piping material, all electrical/ pneumatic connections, yoke and calibration.in carbon steel as per standard 7-52-0452/1171in carbon steel as per standard b348-7-52-4062in stainless steel as per standard b348-7-52-4062in carbon steel as per standard b348-7-52-4063"differential pressure (flow) transmitters (excl. supply of impulse pipe/tubing material)"installation of differential pressure(with or without integral manifold)/ diaphragm seal type differential pressure flow instruments including mounting on yoke, supply of supports for impulse lines/ manifolds/ capillary, fabrication and installation of manifolds/ impulse lines with supports as per standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of supply of instruments, piping material, all electrical/ pneumatic connections, yoke and calibration.in carbon steel as per standard b348-7-52-3339in carbon steel as per standard 7-52-1305in stainless

Central Government/Public Sector

CTN :40019290

12 May, 2025 9.50 Lacs

Agartala - Tripura

Tender For corrigendum : repair replacement of lt over head line, ug cable, replacement of mccbs, main switch at mil stn agartala

CTN :40219049

28 May, 2025 NA

Multi City - Multi State

Tender For replacement of existing over head line of erecting shop shed 1, 2, 3, and 4 to control separate - separate electric power supply by under-ground cables at mechanical workshop/izztanagar.

CTN :40205490

08 May, 2025 NA

Mathura - Uttar Pradesh

Tender For erection of 11 kv underground line, dismentling of over head line etc. under deposit head (financed by mvda) in the area of edd-laxminagar under edc-ii, mathura

State Government

CTN :39759815

08 May, 2025 26.03 Crore

Vadodara - Gujarat

Tender For corrigendum : conversion of ht o/h 11 kv open line (55 sqmm/100 sqmm) to underground line using 185/240mm2 xlpe ug cable with ring main system by installing rmu or over head line using xlpe cable of size 150/185mm2 or using mvcc (medium voltage cover conductor) overhead conductor in jurisdiction of dabhoi division of mgvcl under system improvement (si) scheme

State Government

CTN :39742652

08 May, 2025 50.28 Crore

Kheda - Gujarat

Tender For corrigendum : conversion of ht o/h 11 kv open line (55 sqmm/100 sqmm) to underground line using 185/240mm2 xlpe ug cable with ring main system by installing rmu or over head line using xlpe cable of size 150/185mm2 or using mvcc (medium voltage cover conductor) overhead conductor in jurisdiction of mgvcl under system improvement (si) scheme under nadiad o&m division.

Central Government/Public Sector

CTN :40180819

20 May, 2025 NA

Bhavnagar - Gujarat

Tender For earthwork in formation, blanketing, trolley refuges and construction of major bridges, minor bridges, rubs/lhss and railway flyover (including miscellaneous works like pitching, toe wall, floor protection), construction of building structures, passengers platforms, circulating area, construction of lc gate lodges, lc roads, laying and linking of broad gauge main line, loops lines including points and crossings, tamping of track, destressing of lwrs, transportation of p. way material, supply and stacking of stone ballast and other related civil engineering works, signaling & telecom, electrical and trd works required for the successful completion of work from sabarmati d cabin (including) to sarkhej (including) in connection with doubling of sabarmati - sarkhej section of bhavnagar division on western railway.

Central Government/Public Sector

CTN :40158300

08 May, 2025 1.62 Lacs

Chandigarh - Chandigarh

Tender For providing of custom bid for services - extension of 3300v over head line at pauni sector gouri pouni a ocm at gpsa

State Government

CTN :40166821

13 May, 2025 NA

Bankura - West Bengal

Tender For restoration of main lt power line from wbsedcl meter to distribution panel by supply and laying of cable and allied electrical works at simlapal water supply scheme of bankura district under bankura mechanical division p.h.e.dte.

State Government

CTN :40095274

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing electro-mechanical accessories and others at pump house- i and ii for bahadurpur w/s scheme at murarai -i block under bolpur mechanical division phe dte. - supply and delivery at site of the following submersible pumping machinery and electrical accessories as per approved vendor list of phed, submersible pumping machinery directly coupled with water proof suitable size motor having following specification :- pump:duty condition -25.74 m3/hr, head- 57 mtr, shaft-stainless steel, impeller- s.s / gm, outlet size: 65mm / 80mm., motor:submersible type 3 ph , 50hz, 415 volt 10% 2900 rpm motor must be suitable for operation with star delta starter.(test certificate along with characteristic curve should be submitted at the time of delivery)., 1.1kv grade 4 sq.mm x 3 core water proof flat submersible cable for above pump-motor set., 1.1kv grade 10 sq.mm 3 core xlpe insulated aluminium armoured cable conforming to is 7098 (part-i) 1988, with upto date amendments., supply and delivery of the following valves, pipes and gauges etc at site, 3mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg, 1.5 mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg., 80mm dia. ci top & bottom adopter., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 80mm dia. cidf non-raising sluice valves, pn 1.0 rating (conforming to is:14846) for delivery pipe line and wash out line.(moc & tc needed for valve)., 80mm dia. cidf single door swing non return valve, pn 1.0 rating (conforming to is:5312).(moc & tc needed for valve)., cidf 90 bend- 1no., ci flanged tee- 1no., blank flange-1no., ci/ ms flanged short piece 0.50 mtr.-1no, ci/ ms flanged pipe 1mtr.- 1 no. etc (as per is specification and certification registered) for construction of delivery pipe line and wash out line, heavy type 250mm dia./suitable split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design., anti snapping safety device for pump set by supplying suitable size of ms angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials, 150mm dial pressure gauge [range 0-7kg/cm ] with glycerine filling inside the dial including brass cock and fitting complete [this cost includes 15mm. dia g.i. pipes and specials]., making brick pillar 0.25 x 0.25 x 0.75 mtr/suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete., making cc foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 mtr below the gl including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of eic (size: 3 x 1 x 5)., suitable kiosk box for cable connection of submersible pump motor set with degree of protection ip 65 including suitable legs and 6 nos. al. bus bar for 32 amps and all necessary earthing arrangement and insulator as per direction of eic., laying of one no. cable 10 sqmm 3 core ( departmental supply) in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of thecable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed., carrying and fixing three phase submersible pump 7.5 hp mug starter as per direction of eic ., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms specials etc.

Over Head Line Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government