Latest overflow slide valve Tenders | Government overflow slide valve Tenders

CTN :41289002

28 Aug, 2025 NA

Shillong - Meghalaya

Tender For supply of supply of consumables /implants /devices/accessories, on consignment basis for ctvs - ventilator, invasive pressure monitoring, iv drip sets, anticoagulation monitoring and airway consumables, bain circuit adultbased on mapleson "d" system, provided with a corrugated tube, expiratory valve and antistatic bag.should have co-axial modification of the basic "t"-piece system, developed to facilitate scavenging of waste gases.the process should include patient inspiring fresh gas from the outer reservoir tube and expiring into reservoir tube.lightweight anesthesia delivery system., bain circuit pediatricbased on mapleson "d" system, provided with a corrugated tube, expiratory valve and antistatic bag.should have co-axial modification of the basic "t"-piece system, developed to facilitate scavenging of waste gases.the process should include patient inspiring fresh gas from the outer reservoir tube and expiring into reservoir tube.lightweight anesthesia delivery system., corrugated tube connectorshould allow connection between all breathing circuits and the et tube connector.thecorrugatedtubeshouldbeexpandable.shouldallowmovementofbreathingcircuitatpatientend.should be made of medical grade pvc.should be compatible with ett and tracheostomy tube., micro aggregate blood filter for red cell transfusionfilter media should be 40 micron rated polyester screen media with uniform pore sizeshould have total filter surface area of 170 sq.cmshould have average capacity of filtering 10 units of blood., packed red cell & whole blood leucocyte reduction filters.bedside filtration of one & two unit of packed red blood cells or whole bloodshould have universal spike with microbiological recovery ventshould be with attached straight administration set/automatic self leveling drip chamberperformance should consistently average less than 2x105 residual leukocytes per unitred cell recovery should average greater than 90%.filter housing hold up volume should be 25ml for one unit filter and 35ml for two unit filterit should be single use, forced warming blanketshould be disposable and two layered; should consist of non woven propylene fabric for body warming. should be usable with forced air warming units. material should be latex free and should meet flammability standard 16 cpr 1610 for safety. the manufacturer must have all the below listed types of blankets and should quote the prices separately for separate blankets full body adult underbody adult with arm and head openings pediatric full body pediatric underbody blanket. should be compatible withcommon machines. should be ce certified, cuff inflator and pressure gauge itisusedtoinflate& preciselymonitorthecuffpressureofet tube, tracheostomy tube and lma cuff. reducetheriskofpressurenecrosisandmucosal ischemia theriskofaspirationcanbeavoidedeliminatestheuseofsyringestoinflate&deflatethecuffs. should have release valve to adjust the pressure. gaugecalibratedincmh2owiththedetachablelongconnecting tube. shouldhaveinflationbulbfortheinflationofthecuffshouldhavethehookatthebackoffitsintostandardrail.should have widely spaced scale markings with colour coded pressure ranges.ergonomiconehadoperation, intubation pillow reusable intubation pillow for head elevated laryngoscopy position (help) for airway management of obese &l arge framed patients. shouldbemadeupofdensefoam. shouldbesuppliedwithheadcradle shouldbevinylcovered shouldbecemarked, negative insipratory force meter should be disposable, compact, light weight & amp;single patient use negative inspiratory force meter to check the negative inspiratory force of the ventilated patients with the facility of memory indicator point ertore cord reset highest force achieved by the patient individually packed ready for use. shouldbe ,ce marked, capnography co2 sampling mask shouldhavetheprovisionforbreathtobreathmonitoringforboth nose & mouth should have the facility to deliver oxygen; allow sampling of exhaled carbon dio

Central Government/Public Sector

CTN :41309542

25 Aug, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of leveling valve for fiat bogie with air spring in secondary suspension as per rdso specification c-k-407 (rev-03) amendment-1 of sep' 2018 as per drg no. sketch-k1049. note: item to be procured through rdso approved vendor of air suspension control equipment's for air spring assembly system. [ warranty period: 30 months after the date of delivery ]

CTN :41221298

29 Aug, 2025 NA

Chennai - Tamil Nadu

Tender For rear air suspension spares for leyland vehicles - procurement of rear air suspension spares for leyland vehicles, m.r. split bush for bsiii/bsiv- 620000000704/p2602005, shock absorber for bsiii/bsiv- 620000000560/f8817600/ 620000002913, spherilastic bush without pin for bsiii/bsiv -620000000063/p2601405, spherilastic bush with pin for bsiii/bsiv-620000000790/p2602705, retaining plate for bsiii-620000000450/p2603130, leveling valve major kit for bsiii/bsiv -620000100205, levelling valve assembly for bsiii/bsiv -f8817700/620000100413, levelling valve lever for bsiii/bsiv-620000000309/p2600532, 30.48cm 12 clamp plate for bsiii/bsiv p2603230/620000000449, baloon to levelling valve hose-620000000286, m16x2x100 hexagon bolt for bsiii & bs iv -625000020069, m16 x 2 nylon nut for bsiii & bs iv-625000140015, m12x1.5 male elbow pressing fitting for bsiii / bs iv-620000001144, male connector m12x1.15 for bsiii & bs iv -620000001140, m16 x 1.5 male connector for bs iii -620000001142, rubber connector assembly for bs iii -620000100207, male connector m22 x 1.15 for bs iii -620000001143, m16 allen cap washer for bsiii/bsiv -625000230011/ 625000230042, 12 rolling diaphragm for bsiv -620000001386/g9280228bo/ 610000000088, 12 air spring assembly for bsiv -620000100132/g9280228ca, 12 steel piston for bsiv-620000002217, bump stop for bsiv -620000000269, allen bolt (m16 x 2 x 160mm) for bsiv -625000020080, bolt hex (16mm x 2mm x 120mm) for bsiv -625000020066, bolt hex (16mm x 2mm x 150mm) for bsiv -625000020128, nut hex(16mm x 2mm) for bsiv -625000140013, washer ms spring 16mm for bsiv -625000230006, m12 x 1.75 hex nut for bsiv -625000140009, union tee dia 6 for bsiv -620000001145, stud (12mm x 1.75mm x 65mm) for bsiv -620000000098, compound link assly for leyland bs iv vehicles-620000100041, m10 x 1.5 hex nut, m10 spring washer, m12 x 1.75 nylock nut, m12 plate washer, m12 rubber washer, tapper pivot spicot assly 6 holes-620000000821, taper pivot spigot for bsiv-620000000503, taper lpivot bolt assly for bsiv -620000100841, anti roll bar bush for ule vehicle-f0102300, rear air balloon for ule vehicles-p9200539, front air balloon for ule vehicles-p9400439, front bottom piston for ule vehicles-pb700019

Central Government And Public Sector

CTN :41173742

28 Jul, 2025 1.49 Lacs

Jodhpur - Rajasthan

Tender For various parts for leveling jack hydraulic system of dth rig 03-, hydraulic directional control valve, 3 spool, , pilot operated control valve, , hyd pipe " * 15 feet with both side connection, , hyd pipe " * 08 feet with both side connection, , hyd pipe " * 3 feet with both side connection, , hyd pipe "* 2 feet with both side connection, , hyd pipe 2 "*6 feet with both side connection, , hyd pipe " * 7 feet with both side connection, , hyd pipe " * 1.5 feet with both side connection, , hyd pipe "* 2 feet with both side connection, , hyd pipe " * 7 feet with both side connection, , t connection ", , t connection ", , adapter 2 "*12", , adapter 12 "*1", , adapter "* 3/4", , control ball valve % ", , socket 2 ",

Central Government/Public Sector

CTN :41180072

01 Aug, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of over hauling kit for leveling valve

CTN :41161182

04 Sep, 2025 NA

Gorakhpur - Haryana

Tender For supply of protection plate for leveling valve for coaches to drg. no-aaa35139 alt-b item-1. [ warr anty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41142222

30 Jul, 2025 NA

Hubli - Karnataka

Tender For supply of kit for leveling valve consisting of 12 items as per annexure-'a'. make- apee. [ warranty p eriod: 30 months after the date of delivery ]

CTN :41143828

18 Aug, 2025 NA

Liluah - West Bengal

Tender For supply of space envelope for leveling valve to rdso drg. no. sketch-k1049, alt. 2. conforming to rdso specn. no. c-k 407( rev- 04) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41145455

29 Jul, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of integrated test bench for air spring suspension control equipment (leveling valve and duplex check valve) as per specification attached. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41082259

31 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of %u201cpoh kit for m/s kbil make leveling valve to part no. ii 68831 and duplex check valve to part no. 1.301902 as per sketch no. emu/mtn/be/17-r4. (one set consist of 21 items having 2 7 nos in each set, as per annexure attached).%u201d [ warranty period: 30 months after the date of delivery ]

Overflow Slide Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector