Tender For supplying and fixing of moose vibration dampers for suspension towers from location number 141 to 365 in 400kv srisaillam to sattenanapalli circuit 2 feeder under o&m works
Tender For dismantling of existing 110 kv pneumatic type circuit breakers and erection of new 110 kv circuit breakers on 1ppmc-1, 1ppmc-2 feeder bays and 110/11 kv 20mva transformer-1 and 2 bays at 110 kv substation, medical college.
Tender For upgradation of 66kv tvt i and ii feeder to 110kv double circuit line using acsr wolf conductor from paruthippara substation to thirumala substation
Tender For work of survey design supply erection testing commissioning of 33kv madkaimi ii double circuit overhead feeder with 33kv narrow base galvanized steel tower and acsr wolf conductor
Tender For supply, erection, testing and commissioning of (i) conversion of existing 132kv 2-ph double circuit line to 3-ph double circuit line (4.5km) from 220/132kv ss malyalapalli (with an addl. load of 9 mva to a total load of 26mva) along with erection of new 132kv 3-ph dc line of 4km to proposed 132kv railway traction substation (rtss) at ramagundam (ii) 2nos feeder bays at 220/132kv ss malyalapalli and (iii) 2 nos 132kv metering bays at proposed ramagundam rtss in peddapally district on turnkey basis
Tender For modification of lilo arrangements of (i) 220kv ss jangaon - waddekothapally 1& 2, 220kv jangaon - bhoingir - 1 & 2 multi circuit lilo at loc.no.367a/1 and 367a/94 duly interchanging the circuit on multi circuit towers by dismantling and restringing of moose conductors between location no.367a & 367a/1, 367b & 367a/1 and modification of lilo arrangements of (ii) 132kv ss mahabubabad - ayyagaripally i & ii and 132kv mahabubabad-kts feeder, 132kv mahabubabad - guduru feeder at loc.no.233/51/2 duly interchanging the circuits on multicircuit towers by dismantling and restringing of panther conductor between loc.nos.233/51/1 to 233/21/2 in omc circle, jangaon
Tender For supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh multistran
Tender For supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , moulded case circuit breakers (mccb) conforming to is/iec 60947 (part 2) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , supply and fixing switch socket combination 5 pin, 5 amps flush type. complete all as specified and directed in boq spec file , supply and fixing switch socket combination 2 in 1, 5 amps by 16 amps flush type complete all as specified and directed in boq spec file , supply and fixing distribution board db vtpn 6way out of sheet metal enclosure.complete all as specified and directed in boq spec file , supply and fixing distribution board db tpn 4 way made out of sheet metal enclosure complete all as specified and directed in boq spec file , supply and fixing distribution board db spn 8 way made out of sheet metal enclosure complete all as specified and directed in boq spec file , supply fixing and conmmissioning of one heavy duty plus 30 mtr high mast pole fabricated from hot dip gi steel in three section bottom section of 10500 mm length complete all as specified , supply, installation, and commissioning of a feeder panel for a 30 m high mast lighting system with a load capacity of 7kv. , supply ,testing and commissioneng of lt control panel outdoor type of toe 1.6x1.5x0.75 m having provision of double door. complete all as specified and directed in boq spec file , supply and fixing earthing complete with galvanised steel earth plate tree 50-60cm x 6mm directly in ground.complete all as specified and directed in boq spec file , instalation, testing and commissioning of lt bus bar feeder piller box outdoor type having provision of double door openings.complete all as specified and directed in boq ) /bid number : gem/2026/b/7570938 * /dated: 22-05-2026 & & / bid document 1 / 32 spec file , supply and laying fly ash bricks well purnt old size designation 75 per 1000 laid dry flat for protection of cable.complete all as specified and directed in boq spec file , high mast electrical system,complete all as specified and directed in boq spec file , concealed point wiring complete using 1.5 sqmm pvc insultated sheathed copper cable frlsh 1100 volts , earth dolly for one 3 pin, 5 amps socket outlet in the independent board. , concealed point wiring complete using 2.5 sqmm pvc insultated sheathed copper cable frlsh 1100 volts , for power point on independent board. , supply of laying and digging excavation of foundation pit of size 5ft x 5ft x 5.5ft 4.5ft below ground level and 1ft above ground level complete all as specified and directed in boq spec file , supply and installation of minimum 3.3 tall meters triple lamp post features en attractive 19th-century lamp design.complete all as specified and directed in boq spec file , digging and laying removing excavated material soil not exceeding 50 m.complete all as specified and directed in boq spec file , returning filling in including spreading leveling watering.complete all as specified and directed in boq spec file , sand cushioning for ug cable 8 cm before laying the cable.complete all as specified and directed in boq spec file , supply of laying and digging in trenches by post holes in soft by loose soil not exceeding 1.5 mtr wide.complete all as specified and directed in boq spec file , material and labour of concealed three phase sub main wining using single core pvc insulated cable frls 4x10 sqmm copper conductor multi stranded and 1x10 sqmm copper conductor insulated cable , material and labour of concealed sup main wiring using two single core pvc insulated cable frls 6 samm copper conductor muti stranded and 6.0 sqmm copper conductor insulated cable frls
Tender For supply of electrical materials for the repair and maintenance of street light as per the boq - details, t-5 power/energy saver 2x24w choke, t-5 power/energy saver 24w ftl tuberod, 2x24 t5-holder, t5 power saver 2x24 fixture acrylic transparent cover, t5 power saver 4x24 fixture acrylic transparent cover, 150w hpsv choke, 150w hpsv lamp, capacitor 33mfd 250vac 50 hz, electronic ignitor suitable for 150w hpsv lamps, 150w holder (porcelain), led driver 50w bis certified, led mcpcb plate 60w, led mcpcb plate 50w, led mcpcb plate 150w, supplyingof isi marked and approved make of moulded case circuit breaker(mccb) suitable for 3phase,3pole,50hz,415 volts, ac supply with respective interrupting capacity(ka) at 415 volts cited against their range standard conforming to is - 8828: 8.1mccb with breaking capacity 25 ka at 415 v: current rating -125 amps & 70% -100% adjustable, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian power supply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light sub feeder panels - type 2 pluggable spd 3+1, rating l-n/n-pe uc 255/320 v in 30/60ka ka, lmax 30ka/60 ka, up 1.5kv, supplying of isi marked and accepted standard of miniature circuit breaker(mcb)ofcseries suitable for 240/415volts,50cycle,10ka value ac supply confirming to is:8828:1996,iec:60898 :2002 but without enclosures: single pole 63 amp., astronomical timer with dst feature, contactor 3 pole 90 amp 50hz 415volts with no-nc contacts, tpn connector 150a, supply of approved make powder coated sheet steel encloser spn mcb db inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator): 8 way double door, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian power supply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light - type 2 pluggable spd 1+1, rating l-n/n- pe uc 230/400 v in 5 ka, imax 10 ka, up 1.2kv, led batten tubelight 20w, supplying of approved make tpn mcbdb metal double door with provision for fpmcb/isolator/rccb/rcbo as incomer and sp mcbs as outgoing inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator ): 8 way (8+24), 8 sq.mm multistrand pvc insulated copper wire bundle 90mtr, 1.sq.mm aluminium single core wire bundle of 100mtr. isi marked, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 2-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 4-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 1-core isi marked with alu. stranded/solid conductor: 25sq.mm unarmoured, wooden ladder 21ft, toolkit set consisting of different sizes l-keys, screw drivers, testers and plier set., taperoll box consisting of 30pcs (conforms to is: 7809 (part 3, sec 1),self extinguishing,protects from electrolytic corrosion,excellent water resistance,suitable for primary ins
Tender For corrigendum : modification of lilo arrangements of (i) 220kv ss jangaon - waddekothapally 1and 2, 220kv jangaon - bhoingir - 1 and 2 multi circuit lilo at loc.no.367a/1 and 367a/94 duly interchanging the circuit on multi circuit towers by dismantling and restringing of moose conductors between location no.367a and 367a/1, 367b and 367a/1 and modification of lilo arrangements of (ii) 132kv ss mahabubabad - ayyagaripally i and ii and 132kv mahabubabad-kts feeder, 132kv mahabubabad - guduru feeder at loc.no.233/51/2 duly interchanging the circuits on multicircuit towers by dismantling and restringing of panther conductor between loc.nos.233/51/1 to 233/21/2 in omc circle, jangaon