Latest overhead travelling cranes Tenders | Government overhead travelling cranes Tenders

corporations/Associations/Others

CTN :45451229

19 Jun, 2026 NA

Udyogamandal - Kerala

Tender For auction sale of cast iron scrap,old hastelloy plates,used titanium tubes,used nickel tubes,old silver gasket,old eot crane girder beam assembly,used valves of chlorine cylinders,damaged led street light fittings,old batteries,copper parts from old electrical equipment,old electrical equipments with/ without coil,unused spares of 50 mt mettler make platform weigh bridge,old 50 mt mettler make platform weigh bridge,teak wood table,chlorine tonners, cylinders and cut pieces of old tonners and cylinders,scrapped cathode fine mesh,scrapped cathode coil cushion,scrapped anode mesh,old track shoe plate,mixed ms scrap,scrapped condenser,scrapped chiller,scrapped msrl acidic water tank,old msrl hcl storage tank,scrapped msrl chlorine buffer vessel tank

CTN :45429810

16 Jun, 2026 NA

Jamalpur - Bihar

Tender For auction sale of others - scrap and condemned machine & plants consisting of m&p no. [1] 10178 eot crane.conditions:-[1] as is where is basis [2] minimum dismantle in 04 parts [3] all electrical fittings & electrical motor are included for sale.[4] purchasers are adviced to see the lot before bidding and satisfy themselve in all respect. no complaint/claim by the purchaser will be entertained after e-auction sale. [5] custodian may allow purchaser to bring crane if it is required and justified.

Central Government/Public Sector

CTN :45374560

05 Jun, 2026 NA

Dahod - Gujarat

Tender For auction sale of depot ferrous scrap - scrap released m&p machine eot crane k-1(tm-2) (composition as per consignee only ferrous ms=13550 kgs) (note-indicative approximate composition only for reference not to claim). cutting will be allowed for easy loading. over aged and unserviceable condition. as is where basis. mode of delivery in number. fdp 40 days.

Central Government/Public Sector

CTN :45325972

03 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned m&p items such as eot crane cap-25 ton, plant no.90 consisting of bridge griders , trolley , track and cabin and other eot items with or without motor cables and panels etc and with or without nf , plastic wood and rubber etc attachments. in dismenteled and broken condition. (qty approx) ( cutting allowed for easy loading )

Central Government/Public Sector

CTN :41045750

21 May, 2026 17.88 Crore

Hyderabad - Telangana

Tender For bid to ras corrigendum : custom bid for services - comprehensive annual maintenance contract at user location dappar chandigarh for 5 years- annual maintenance contract is for the allied services of tp infrastructure at user location, dappar of indian army. the scope of work is to provide services of five (05) year comprehensive maintenance and 24x7 operation and maintenance (including supply of consumables) of below mentioned systems-1 hvac system, 2 fire fighting & fire alarm system, 3 building management system, 4 operation & maintenance of electrical eqpt:- (a) dg sets., (b) transformer & related eqpt., (c) panel boards, (d) ht/lt cables, (e) earthing pits & related eqpt., 5 electrical overhead travelling cranes (eot cranes), 6, any other electrical accessories connected to the systems mentioned in sl.no. 1,2,3,4 & 5. 7 one time repairs .

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

Central Government/Public Sector

CTN :45031595

07 May, 2026 NA

Multi City - Delhi

Tender For auction sale of depot ferrous scrap - condemned eot crane with control panel and 2 motors (29 hp, 3 phase & 11.26 hp, 3 phase), 30/5 ton cap., make- avon. as is where is basis. lot qty.-1 no.=22 mt approx.

Central Government/Public Sector

CTN :44977642

06 May, 2026 NA

Varanasi - Uttar Pradesh

Tender For auction sale of depot miscellaneous scrap - scrap eot crane 05 tonne capicity make-local with one electric motors and non ferrous attachment. qty-4.74 mt(approx). note-1-loading by purchaser. 2-cutting and dismantling allowed. 3- removal of whole lot. 4-dilivery not allowed against part payment. custodian-sse-csp-ksf , location-lying at conrete sleeper plant, n. rly.-khalipur- varanasi . ref-aee-csp-n.rly.-ksf-varanasi. letter no-1a/csp-ksf/2025-26/condemnation dated-10.03.2026

Central Government And Public Sector

CTN :44964421

29 Apr, 2026 NA

Varanasi - Uttar Pradesh

Tender For auction sale of depot miscellaneous scrap - scrap eot crane mw no.:-1808, make:- micco ,cap:- 03 mt on "as is where is basis". four motor attached ( 03 motor capacity- 3 hp and 01 motor capacity- 7.5 hp) on eot crane . purchaser will have to uproot, dismantle and lift the items by his own arrangement. gas cutting is allowed for loading purpose only subject to the following conditions: purchaser should ensure that availability of fire extinguisher, sand, water bucket etc at delivery point. witnessing staff should be present while gas cutting is in progress. photograph available on ireps. note: purchaser to submit power of attorney (poa) in uploaded format on ireps portal (purchaser can reach the said poa format in ireps through " document -> view & publish depot condition -> click for blw /gsd dlw document list -> action (view condition) ")

CTN :44891328

30 Apr, 2026 NA

Udyogamandal - Kerala

Tender For miscellaneous works in thermal-2 - miscellaneous works in thermal-2, the work shall be carried out on a manday basis and includes collection, segregation, and shifting of metallic and non-metallic waste materials from the thermal-2 building premises. the activities cover handling of rusted metallic items, structural scrap, insulation materials, oil sludge/oil slick, mud, debris, and other miscellaneous scrap lying at various locations such as the ground floor near boiler area, pipe rack area, tg floor area, cooling tower area, and other surrounding premises. the work also includes bringing down waste materials from different floors of boiler units 1, 2, and 3 to ground level and consolidating them at a designated location. all manpower, tools, tackles, and equipment shall be provided by the contractor. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., the work shall be executed on a manday basis and includes loading and unloading of segregated metallic and non-metallic scrap/waste materials within the fact ud / petro plant premises as directed by the engineer-in-charge. all required manpower, tools, tackles, and handling equipment including concrete lump breakers shall be arranged by the contractor. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., transportation of scrap and waste materials loaded under sl. no. 2 from cpp - pd premises to the designated scrap yard, waste dumping area, or any other location within the fact ud / petro plant premises, as directed by the engineer-in-charge. the contractor shall provide a suitable truck having carrying capacity up to 2 tonnes for the purpose.the rate per trip shall be inclusive of all charges such as vehicle hire, driver wages, fuel, and any other incidental expenses.copies of the relevant scrap dispatch advice and weighbridge report shall be submitted by the contractor for each lot of material transported. the quantity indicated is tentative and payment shall be made based on actual number of trips certified by the engineer-in-charge., the work shall be performed on a manday basis and includes moving and rearranging used materials and equipment parts such as valves, pumps, flanges, motors, radiators, drums, welding sets, structural items, roof sheets, and other related materials stacked at various locations including cpp building north and south entrance areas, boiler feed pump area, tg floor area, and other specified locations, as instructed by the engineer-in-charge. required cleaning materials, rigging materials, tools, tackles, and manpower shall be arranged by the contractor. the eot crane at the tg floor may be used free of cost, subject to availability. loading and unloading for shifting within the petro plant premises shall be in the contractor s scope. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., the work shall be carried out on a manday basis and includes removal of vegetation from the outer side walls and top platforms of cooling tower cells, removal of vegetation from the side walls and floor of the cooling tower pond, and removal of accumulated mud, slurry, and other unwanted materials within the cpp cooling tower area. all manpower, tools, tackles, and equipment required for execution shall be arranged by the contractor. cleaning of all four cooling tower cells shall be treated as a single activity., the work shall be executed on a manday basis and includes thorough cleaning of the furnace oil (fo) pump house area. furnace oil spillage on floors, including areas beneath oil heaters, around pumps, condensate drains, and adjoining areas, shall be removed by spreading sawdust and collecting the oil-soaked sawdust for proper disposal as instructed by the engineer-in-charge. sawdust, cotton waste, manpower, tools, and all other materials required for complete execution of the work shall be arranged by the contractor. payment shall

Overhead Travelling Cranes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors