Get complete information related to latest Oxide Paint Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Oxide Paint Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Oxide Paint Tenders.
Tender For supply of pu paint for wagons colour gentian blue ( ral-5010 ) rdso spec. no. m&c/pcn/109/2009. amndt. no. 1b as additional requirement. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]
Tender For supply of m.s. floor grill and staircase step grill with one coat of red oxidepaint for esp airpreheater, id fan pa fan and fd fan platforms in unit i ii and iii
Tender For supply of set of interior panelling arrgt. in driver's cab for memu3ph (bhel) coaches, coating type pu paint system to mdts118,colour shade to ral-9018,matt finish gloss val ue 10-12 at 45 degree as per lno.md22151 dated 18.06.19., as per drawing: em44113 alt b w/ o item no. 1, 32 to 35. as per design office l.no. md21896 dated 03/10/2022 mdts-133 rev. 0 5 is applicable in lieu of icf/md/spec-167a mentioned in the drawings, packing instructio n no.pi112 ver 2.0 or pi193 ver 1.0 [ warranty period: 84 months after the date of delivery ]
Tender For supply of pu paint for wagons colour gentian blue ( ral-5010 ) rdso spec. no. m&c/pcn/109/2009. amndt. no. 1b as additional requirement. as per drg.no. - [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]
Tender For corrigendum : supply of material 500 bedded medical college jhansi - supply of material, earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge:, 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete., r.c.c. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in column excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inclduing supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being included in this item, rcc work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inlcuding supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being inlcuded in the item., class-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work., r.c.c. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in foundation excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inclduing supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being included in this item, class-150 half brick work in 1:4 cement and coarse sand mortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.including suply and wastage & overlapping.thermo-mechanically treated bars of grade fe-500d or more., 15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand), providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. using m.s. angels 40x40x6 mm for diagonal braces, providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete., one priming coat & one coat oil distemper on new work inlcuding supply of all materials. labour and t&p etc. required for proper completion of the work, painting or varnishing or iron works in small areas with one coat of ready mixed in priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and t&p etc. required for proper completion of work paint to be used should confirm to the i.s.i. no. 103 1950, finishing walls with acrylic smooth exterior paint of required shade: - new work (two or more coat applied @ 1.67 ltr./10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm., kota stone slabs 20 mm thick in risers of steps, skir
Tender For procurement of different consumable items and spares for overhauling of unit-4,1 and 2 under em-iph dept. at bktps. - "silastic 732 rtv (300gm bottle) additional data: (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container)" , "jointing sheet,asbestos,2000x1500x3 mm # jointing sheet,non-metallic compressed asbestos fibre to withstand 550 degree c,150 ksc is code 2712/9.8 grade w/1,size-2000?1500? 3 mm additional data: brand-champion style 54 super, non-metallic, water gasket, make-champion seals(india)" , "jointing sheet caf style 59 oil gasket, additional data: additional data:non metalic compressed asbestos fiber withstand 550 degree c,150ksc,2000x1500x3mm,make-champion." , "jointing sheet,asbestos,2000x1500x1 mm # jointing sheet non-metallic compressed asbestos fibre to withstand 550 degree c,150 ksc is code 2712/9.8 grade 0/1 size-2000?1500? 1 mm additional data: additional data: brand-champion style 59 oil non-metallic, make-champion seals(india)" , "thinner -234 for varnish additional data: additional data: 800 gm sealed container, make: dr. beck (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container)" , "acetone additional data: additional data: make- merck limited, 2.5 ltrs sealed container. (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container)" , "varnish bectol red additional data: additional data: 1 kg sealed container, make: dr. beck (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container)" , paint remover,locktite,sf-790 for generator , "varnish bectol grey additional data: 1 kg sealed container, make: dr. beck (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container)" , "paint synthetic enamel black additional data: make- asian paints / burger." , "paint synthetic enamel smoke gray additional data: additional data: 1 ltr sealed container,make- asian paints / burger. (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container)" , "hardner,hy 840 for eco-ash wa drg.no.: hw5520073007 additional data: additional data: drg.no.hw5520073007, new cat no. hy 140, in 500gm sealed container. make - aradur / huntsman." , "resin,cy 205 $for wound stator assy part no.01350801003122 additional data: additional data: part no.01350801003122,wound stator [in 1 kg sealed container.] make- araldite / huntsman." , diluent c,drg:5670269,item no:134 generator , "ms plain washer, is: 2016, size- m16 additional data: actual requirement: mat.: g.i., thickness >= 2mm." , "nipple?part?list.9139360100400039 additional data: [sample can be provided]" , "hose ?"" dia.430 mm length # hose ?"" dia.430 mm length with fittings grade ph8 design pr.345 bar,insulation resistance 15 megaohms for jacking of 210 mw bhel g enerator shaft" , "hose 3/8"" dia. 430 mm length # with fittings grade ph8,design pr. 276 bar,insulation resistance 15 megaohms# for jacking of 210 mw bhel generator shaft" , "compressor cr42(3.0 tr) 3ph for split ac for ac plant ductable split ac,make: blue star additional data: alternate make: emerson climate technologies model cr42k6m-tfm-101dm of emerson copeland, 3ph, 380-420 v, r22" , teflon bar,size:50mm diax300mm long , "nomex paper,size-1mx2mx0.3mm # additional data: actual required: thick-0.7 or 0.8 mm" , "temperature controller cum indicator # digital,range,-50 deg c to + 50 deg c,type,dtc,multistain additional data: actual requirement: make:sub-zero, model:sz-7556-p, 0-50 d cen, ip-65, i/p-3.2va max, probe-ntc." , "digital temperature controller # size-96mm*96mm,cat code-tc-144 additional data: additional data: make:honeywell,model:t2798i2000,0-50 d cen" , "switch , water flow, wfs6000, honeywe
Tender For supply of specified and as directed. , m and l sand cushioning dry in trenches for protection of ug cables below above and around the ug cable , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 1016 sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 2550 sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 x 70150 sqmm , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 25 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 50 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 100 mm bore dia , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm , dismantling existing lt panels of any type any size carefully for reuse including necessary excavation demolition of concrete disconnecting of earthing cable , labour only for disconnecting isolating and taking out burned unserviceable lugs switchgear metering devices wiring bus bar etc , supply only the followings to be incorporated against item no 30.00 and 31.00 only 06 sqmm to 16 sqmm , 25 sqmm to 50 sqmm , 70 sqmm to 95 sqmm , 120 sqmm to 240 sqmm , epoxy type insulator upto 1100volt for lt panel bus bar including nut bolts etc. , single core stranded copper conductor frls of size 16 sqmm including copper lugs at both ends , single core stranded copper conductor frls of size 10 sqmm including copper lugs at both ends , aluminium busbars electrolytic grade of as per site required amps and ka rating bus bars with ryb and black colour coding including drilling cutting , s and f of framed work as in doors or gates of angle or other section with gusset plates rails braces etc. complete drilled for fixing of steel sheeting or other covering. doors etc. , m and l for cross arms bracings supports clamps and back plates fabricated from structural steel sections includings nuts bolts washers welding , m and l for cement concrete 136 type c2 using 40mm graded crushed stone aggregate as in pole foundation filling and mass concrete complete all as specified , m and l for cement concrete 124 type b1 using 20mm graded crushed stone aggregate as in coping of pole including weathering slightly rounded , m l brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build , m and l for 15mm thick in cm 14 rendering on brick or concrete surfaces finished fair and even on wall complete all as specified and directed. , m and l for hardcore of gauge n exc. 63 mm deposited spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface as specified and directed. , m and bid details/ 2 / 38 l ss pasivated screw bolts machine made with hexagonal head at one end and screwed the other ends each screwed end to be fitted with washers and one hexagonal nut diameter , m and l for preparation of existing surface of lt panel by srapping down peeled off old paint cleaning etc and applying two coat of siemens
Tender For supply of set of item for anti corrosive epoxy paint to colour basalt grey to ral 7012 having pa ck a and pack b to rdso specification rdso / m&c/pcn/123/2012 qty. 25 litres (a&b) with colourless l ow odour mineral sprit to dilute epoxy coating material qty - 5 litres. [ warranty period: 30 months after the date of delivery ]