Latest oxygen meter scrap Tenders | Government oxygen meter scrap Tenders

State Government

CTN :45178636

28 May, 2026 80.00 Lacs

Guna - Madhya Pradesh

Tender For rate contract for supply local purchase award for purchase of various electrical equipment/goods and safety appliances under jurisdiction of general manager (ondm) mpmkvvcl,guna - rate contract award for purchase of various electrical equipment/goods, trip coil shunt 30 volt dc suitable for 33 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 33 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make shreem, trip coil shunt 30 volt dc suitable for 11 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make - bhel, trip coil shunt 30 volt dc suitable for 11 kv vcb make erl, trip coil shunt 30 volt dc suitable for 11 kv vcb make alstrem, trip coil shunt 30 volt dc suitable for 11 kv vcb make schenider, trip coil shunt 30 volt dc suitable for 11 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 11 kv vcb make c&s, trip coil shunt 30 volt dc suitable for 11 kv vcb make - s&s, closing coil shunt 30 volt dc suitable for bhel make vcb, closing coil shunt 30 volt dc suitable for crompton make vcb, closing coil shunt 30 volt dc suitable for essun make vcb, closing coil shunt 30 volt dc suitable for megawin make vcb, closing coil shunt 30 volt dc suitable for stelmec make vcb, closing coil shunt 30 volt dc suitable for areva make vcb, expulsion fuse 40 amp. (t-40) for capacitor bank, expulsion fuse 60 amp. (t-60) for capacitor bank, digital clamp meter tong tester (0-750 volt ac 1000 amp. ac) make- mexo/motwane, megnatic oil gauge for power transformer (mog) 6 inc dia with lead, spring charging motor suitable for 11 kv vcb make-bhel, spring charging motor suitable for 11 kv vcb make - crompton, mfm suitable for control panel of all makes., selector switch suitable for control panel of all makes., buchholz relay(gas & oil operated) (is 3637) flenge-6 inch, gi nut bolt assorted size, tool kit with box specification having per kit 1-de spanner set of 10 pieces no. 6x7 to 24x27 2-ring spanner set of 10 pieces no. 6x7 to 24x27 3- cutting pliers (8 ) 01 no 4-nose pliers (6 ) 01 no 5-pipe wrench adjustable (12 ) 01 no. 6-hammer 01 no. 7-hexa with blade 01 no. 8-screw driver (06 ) 01 no. 9-screw driver (08 ) 01 no. 10-screw driver (10 ) 01 no 11-screw driver (12 ) 01 no 12-wrench pana 13-chisel 01 no make tapariya/venus, 11 kv insulated pull rod suitable for bhel make vcb with copper shunt, piercing connector type i for single phase/three phase suitable for 70-150 sq mm cable, raincoat(rubberisied) with cap make duckback, bamboo ladders 24 (feet) long approx having 2 to 3 dia at the bottom and 1.5 to 2.5 at top of bamboo the cross piece i.e. 16 no. step should be at a distance of approx 17 and bamboo ladder should be tightened with g.i. wire of 16 swg at least 4 places the top of ladder should be wide 35 to 40 cm and bottom 58 to 60 cm, silica gel (blue)2 to 4 mesh, breather with silica gel (blue) 2 to 4 mesh for power transformer capacity 5 kg, poly propylene rope 24mm dia make tuff rope/equivalent standered make with isi mark., smart connector suitable for m-16 ct tetminal to dog/raccoon suitable for ai alloy, cb smart clamp for dog/raccoon and panthor conductor, 30 volt dc led type indicating lamp of green/red/yellow colour, breaker control on/off switch handle type suitable for control panel make-recon/kaycee/any standard, lv brass stud complete made of brass stud with its all accessories for 200/315 kva distn. transformer one set for brass stud 300 amp shall comarion of brass stud 265x20 mm 01 no. brass hexa nut full thred-01 no., brass lock nut-02 no., brass rear nut-02no. sealing ball washer -01 (neoprene rubber washer) & brass plain whaser-02 no approximate weight 1050 gram -+5% tollarence., lv brass stud suitable for 25/63/100 kva x-mer length of rod 200mm dia 12mm, both & therder up 60 mm heaving chuck out washer & bass washer with 05 no. nut approximate weight 320 gram -+5% tollarence, 33 kv bushing for ptr suitable for 20 mm stud, 11 kv bushing for ptr suit

State Government

CTN :45231232

08 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by the contractor.

Central Government / Public Sector

CTN :45050331

25 May, 2026 NA

Karimnagar - Telangana

Tender For supply of laser distance meter 100 meter range as per specifications attached make/brand: bosch or similar. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45284530

01 Jun, 2026 NA

Khurda - Odisha

Tender For supply of leaser distance meter. make-sonel-poland,model: lmw100 as per techniucal specification attached in annexure- 1 &2 accpeted make: sonel or doble or megger . [ warranty period: 30 months after the date of delivery ] ]

CTN :45144287

12 Jun, 2026 30.00 Lacs

Chatarpur - Madhya Pradesh

Tender For purchase of handpump repairing material under municipal council chhatarpur - head assembly with handle complete (as per isi), head assembly without handle (as per isi), handle assembly complete (as per isi), water tank assembly (as per isi), stand assembly (as per isi), third plate (as per isi), g.i. riger pipe 32 m.m. isi medium b class (3 meter), g.i. riger pipe 32 m.m. isi haevy c class (3 meters), chain with cupling (as per isi), 32 mm g.i. pipe socket (as per isi), 12 mm connecting rod (as per isi) (3 meter), 12 mm connecting rod socket (as per isi), ci cylinder body only (as per isi), ci cylinder assembly with brass asseseries complete, plunger rod for cylinder, upper valve assembly complete brass (as per isi), lower valve assembly complete brass (as per isi), rubber seeting for upper valve (as per isi), rubber seeting for lower valve (as per isi), valve guide (as per isi), spacer (as per isi), brass sleep (as per isi), rubber washer (as per isi), seeling ring (cap packing) of nitric rubber (as per isi), ci reducer cap (as per isi), nut bolt for handpump (as per isi), chain nut bolt tvs (as per isi), bolt for cover (as per isi), spacer for rubber washer (as per isi), pipe lifter for 32 mm (as per isi), pipe wise 3 no. size (as per isi), pipe wise 2 no. size (as per isi), hand pump rod die set (as per isi), pipe die set 32 mm, 32 mm dia u.p.v.c. riser pipe, 32 mm c.i. adopter set for u.p.v.c. pipe, 12 " pipe wrentch (taparia/j.k./ ambika), 18 " pipe wrentch (taparia/j.k./ ambika), 24 " pipe wrentch (taparia/j.k./ ambika), 36" pipe wrentch (taparia/j.k./ ambika), 16x17 ring spainer, 18x19 fix spainer, screw wrentch (taparia), 6204 bearing, distance piece, hexa blade, hexa frame, pipe tools, 2 tonnes chain block, 3 tonnes chain block, handle axle, 5 tonnes chain block

Central Government/Public Sector

CTN :43094687

25 May, 2026 36.39 Lacs

Dipka - Chhattisgarh

Tender For bid to ras supply of procurement of switches communication cable and other networking accessories d d ? g? g -media converter single mode full duplex converts 1000 base t to 1000 base sx , media converter single mode full duplex converts 1000 base t to 1000 base lx , network switch ethernet ports 8x10100 mbps poe rj45 port , network switch fully managed layer 3 access ethernet ports , transceiver sfp single core single sfp mode maximum cable distance 40km , transceiver sfp dual core single sfp mode maximum cable distance 40km , layer 2 access switch 5 1g copper port unmanaged non poe , layer 2 access switch 8 1g copper port unmanaged non poe , ethernet layer 3 access switch managed non poe 24 1000 base t port 4 10g sfp ports , ofc cable single mode 6 cores conforming to iso 60793 , cat6 utp cable for indoor use 8 conductors 24 awg dia conforming to iso 11801 , cat6 utp cable for outdoor use 8 conductors 24 awg dia conforming to iso 11801 , ofc patch cord duplex sc to sc 3 meter single mode 9125 micron fibre , ofc patch cord duplex sc to lc 3 meter single mode 9125 micron fibre

Central Government / Public Sector

CTN :45088776

19 May, 2026 NA

Guntakal - Andhra Pradesh

Tender For corrigendum : supply of laser distance meter (q3)

Central Government/Public Sector

CTN :45226413

29 May, 2026 NA

Palakkad - Kerala

Tender For supply of laser distance meter (q3)

CTN :45193763

04 Jun, 2026 NA

Kanchrapara - West Bengal

Tender For supply of led based twin beam head light with complete assembly part no:- 24v dc 100/90 w conforming to rdso specification no. rdso/2017/el/spec./0134 rev-3 for track machines. part make: ensave/signotron/matsushi/plasser/phooltas/kershaw or equivalent. illumination intensity:- at a distance of 8 meters, it shall not be less than 7000 lux and not more than 9000 lux in bright mode & in dim mode itshall not be less than 900 lux and not more than 1200 lux. during type test illumination intensity measurement will be done at 305 meter and it shall not be less than 4.8 lux in bright mode. note: material suppliedby firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45120738

01 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply of ip 5mp ptz speed dome 4g (140w -70ah solar -panel) 12v black light cmos chip effective pixels: 2560(h)x1920(v) connectivity: ip/4g network wireless 36x optical zoom, ir distance up to 180 meter focus length 4.7-94mm, max 180/s pan speed electronic shutter pal: 1/251/100000s ntsc:1/301/100000s 6pcs white laser lamps, 8pcs high-power infrared lamps led night vision range 100 meters, 2 warning lights (red and blue) built-in 5w powerful horn/microphone, two-way intercom special voice commands ai multipoint human tracking, optical focus 36x horizontal range 360?, vertical range -90? shell material high strength aluminum alloy shell memory support 128g tf card working power supply dc12v/5a, waterproof ip66 (both indoor and outdoor) arrangement for antitheft. [ warranty period: 30 months after the date of delivery ]

Oxygen Meter Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors