Latest oxygen monitor Tenders | Government oxygen monitor Tenders

CTN :41055055

22 Jul, 2025 18.00 Lacs

Bareilly - Uttar Pradesh

Tender For providing of custom bid for services - custom bid for services - rake decantation work; obhs and related service for railways (new version 2.0)-scope of work includes decantation of full/partially rake filled with petrol (ms) and diesel (hsd) into existing petrol (ms) and diesel (hsd) tanks through existing pumping and piping facilities by connecting of flexible hose in between tank wagon & piping header. 1. contractor has to available at site with his all manpower (total 10 nos. manpower) at least 30 minutes before placing of filled rake at omc siding. 2. necessary liasioning need to be done by contractor for rake placement with railway. 3. once the rake is placed at omc railway siding contractor has to check all seals, cover and number of wagons before connection of flexible hose pipe. 4. after checking the wagons contractor has to do sampling & qc (temperature, density and visual check of product) of all wagons in presence of bpcl officer. 5. once qc is over dipping of each wagon to be done in presence of bpcl officer. 6. after dipping of the wagons flexible hose connection need to do in between ms/hsd wagons and ms/hsd existing piping header respectively in presence of bpcl officer. 7. after hose connection contractor needs to start decantation of tank wagons through pumping into existing ms/hsd tank. 8. after starting of decantation of tank wagons one person should be present in siding pump house for operating & monitoring of pumps and one in tank farm for checking the level & changing of tanks until tank wagons are fully decanted. 9. once decantation over all wagon s emptiness needs to be checked and master valves & man way cover to be closed if wagons are empty. 10. after decantation flexible hose connection need to be removed and kept at specific location. 11. all bottom nozzles of wagons need to be closed properly with blind plate after hose disconnection. 12. release memo issued by bpcl officer need to be submit by contractor supervisor to aonla railway station. 13. all tools, tackles & equipment for the above job is in scope of vendor. 14. vendor has to use non-sparking tool for above jobs and all non-sparking tools is in scope of vendor. 15. all the above work needs to be complete within 8 hrs. if rake decantation delayed (beyond 8 hrs.) due to contractor issue, then demerge charged by railway need to be paid by contractor himself. 16. line drain needs to be done in ag/ug tank after decantation..

CTN :40315629

14 Jul, 2025 38.58 Lacs

Poonch - Jammu And Kashmir

Tender For bid to ras corrigendum : supply of ptz camera with adapter , ir camera with adapter , pole with hanging bracket 65 mm , ptz camera rain shield , ir camera rain shield , pc set , 75 inches screen for central monitoring , 3.5 kva online ups , battery for online ups , nvr 8 channel with 2 tb hdd , nvr 16 channel with 4 tb hdd , nvr 32 channel with 8 tb hdd , 20 km ote with adapter , 4 port switch , 8 port switch , 3 core power cable , 6 core ofc cable , flexible cable , cat 6 outdoor lan cable , hdmi cable 2 mtr , hdmi cable 5 mtr , hdmi cable 20 mtr , pig tail sc , rj 45 , 2u rack , 3u rack , power switch board 5 socket , power switch board 2 socket , 2 mtr patch cord , 5 mtr patch cord , 5v adapter , 12v adapter , 24v adapter , iso solution , lan tester , insulation tape , nylon plastic tie 6 and 8 inch , fiber sleeves , crimping tool

CTN :41025343

25 Jul, 2025 NA

Gangtok - Sikkim

Tender For sitc of hardware for ssdc d d - red hat enterprise linux , next generation firewall , network analyzer , network monitoring tool , core network switch , enterprise storage (q2) , san switch (q2)

CTN :40908106

31 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply and installation of training items for solar technician (electrical) trade under craftsman training scheme (cts) at consignee locations - measuring steel tape: 5 meter, plier: combination, 200 mm, screw driver: insulated, 4 x 150 mm, screw driver: insulated, 6 x 150 mm, screw driver: insulated, 8 x 200 mm, screw driver: insulated, 10 x 250 mm, center punch: 100 mm, electrician s knife: 100 mm, neon tester: 500 v, steel rule: 300 mm, graduated both in metric and english unit, hammer: cross peen, 500 grams with handle, chart: electrical symbol and basic electronic component, pipe vice: 100 mm, hand vice: 50 mm, bench vice: 100 mm, hacksaw frame: adjustable, 250 mm to 300 mm, hacksaw frame: fixed, 150 mm, file: flat, second cut, 200 mm with handle, file: half round, second cut, 200 mm with handle, file: round, second cut, 200 mm with handle, plier: long nose, 200 mm, plier: flat nose, 150 mm, plier: round nose, 150 mm, spanner set: double ended, 6 mm to 32 mm, set of 12, standard wire gauge: metric, portable electric rotary hammer drill machine, crimping tool: 0.5mm to 16mm , crimping tool: 2.5mm , 4mm , 6mm , crimping tool: 25mm to 400 mm , plier: side cutting, 200 mm, wire stripper: adjustable length, hammer: ball peen, 500 grams with handle, scriber: bend and straight, 150 mm, 5 tray cantilever tool box: w:d:h = 450:200:200, 20 mm, plastic tool box: w:d:h = 550:300:250, 20 mm, 7 drawer tool trolley: w:d:h = 700:450:900, 25 mm, allen key set: hexagonal, 1.5 mm to 10 mm, set of 9, scissor: 200 mm, paper, plastic handle, right hand, electrical load trainer, torque wrench: 5 nm to 25 nm, pipe cutter: wheel type, 3 mm to 30 mm, pipe cutter: for pvc pipe, upto 42 mm, engineer s square: 150 mm blade, load bank: variable, 1.2 kw, lamp/ heater type, wire cutter and stripper: 150 mm, earthing plate set, earthing electrode set, micrometer: outside, 0 mm to 25 mm, lc = 0.01 mm, tap and die set, platform trolley: 150 kg, rooftop mounting structure: 2 kw, gi, rooftop mounting structure: 2 kw, aluminium, electrical wiring and switch gear rack: training kit, protective relays and contactors trainer, demonstration board: circuit breakers and fuses, rccb with isolator, demonstration board: electrical cables, solar dc cable: 4 sq.mm, red, solar dc cable: 4 sq.mm, black, mc4 solar connector, hacksaw blade: length = 300 mm, width = 12.5 mm, thickness = 0.63 mm, tpi = 18, low alloy, packet of 100 blades, pickaxe, spade, wheel barrow: 2 wheels, 50 liters, trowel: brick, 8 inch x 5.5 inch, trowel: heart, 6 inch, trowel: plastering, 8 inch x 5 inch, trowel: pointing, 6 inch, plastic tub: 20 liter, manual earth auger, stillson pattern pipe wrench: length = 300 mm, opening = 42 mm, spanner: adjustable, 300 mm, universal quick adjustable multi-function wrench spanner set, multimeter: solar, insulation resistance tester: digital type, hydrometer, solar insulation tester: digital, pyranometer, lux meter: upto 1 lakh lux, magnetic flux meter, clamp meter: solar, soldering iron set: solar technician (electrical), thermometer: digital, 0 to 150 degree celsius, sun shine recorder, weather monitoring station, sunlight radiation meter, magnetic compass, cut model: photo voltaic cell assembly, cut model: lead acid battery, battery: lead acid, tubular, solar, 12v, 150 ah, simulator: solar cell characteristic study, iv curve tester, sun path finder, solar energy trainer with grouping of solar cells, demonstrator kit: solar tracker, solar pv e-learning software, halogen lamp with stand, bench grinder: double ended, 200 mm, solar photovoltaic module: 75 w mono crystalline module, solar photovoltaic module: 75 w amorphous silicon module, solar photovoltaic module: 250 w thin film module, solar photovoltaic module: 5w poly crystalline module, solar photovoltaic module: 10w poly crystalline module, solar photovoltaic module: 40w poly crystalline module, solar photovoltaic module: 250w, solar mppt meter, solar charge controller: dusk to dawn automati

Central Government / Public Sector

CTN :40962436

25 Jul, 2025 24.61 Crore

Panipat - Haryana

Tender For custom bid for services - rprc256204-rate contract for rotary equipment maintenance in p-25 units at panipat refinery-1. personal protective equipment (total marks - 80), i). whether p.e.e. used as per the contract standard., ii). p.p.e. compliance at site (% marks will be deducted as per the violation of each worker), iii). during the working period, at least 20% additional ppe by the contractor stock has been kept., iv). p.p.e. given to the worker by the contractor is recorded in a ppe monitoring register. contractor shall, have a detailed register., 2. training (total marks - 50), i). tool box talk has been provided to the contract workers and record maintained., ii). arrangement of safety training for contract workers (induction fire and safety training / on the job safety, training), iii). does the contractor ensure that all the workers are skilled as per the job given?, iv). does the contractor ensure that all contract workers are supervised directly by the competent person., 3. incident / injury / incidence of hair loss (total marks - 70), i). incident of near miss reporting by contract workers (1 point for each 20 under-miss reported, maximum, 20 points)., ii). unsafe act / unsafe condition noticed against contractor / contract employee., iii). first aid / fire incident / injury (10 for every first aid / injury), iv). major accident / major fire (100 every accident), 4. work permit (total marks - 100), i). all works done with valid work permit and clearance., ii). work permit violation (2 every work permit violation), iii). during the work, standard operating procedure (sop) was followed., iv). whether the standard equipment is used by the contractor., 5. safety incentives and awareness (total marks - 100), i). did the contractor motivate his employees on the basis of safety performance? whether the contractor, held a safety meeting with his employees and engineer in charge., ii). whether the contractor has promoted safety on the site to make the contract employees aware about, safety., iii). whether the contractor appointed a safety supervisor., iv). did the contractor or its worker get any appreciation award from the iocl management?, v). whether all the contract employees have been medically examined and their documents have been, submitted to the engineer in charge., .

CTN :40916686

17 Jul, 2025 NA

Subarnapur - Odisha

Tender For supply of solar trade equipmetns and machinery d d - knife double bladed electrician , electrical symbol and accessories charts , gauge wire imperial stainless steel marked in swg and mm , scriber knurled center position , tool kit box bag portable , electrical loads , torque wrench , multi meter analog , load bank variable , wire cutter and stripper , tap set , trolley for transportation of batteries , die for threading , rooftop mounting structure , electrical wiring and switch gear rack , protective relays and contactors rack , fuses , different cables , solar cable red , solar cable black , three core wire , battery cable , resin cored solder , solder wax , mc 4 connector , pins , lugs , hacksaw blades , bolts nuts anchor bolts washers, screws, other pins lugs etc , civil work utensils , plumbing tools , plumbing raw materials , civil work raw materials , hydrometer , pyranometer , pyrheliometer , magnetic flux meter , soldering iron , temperature controlled soldering iron , thermometer digital , sun shine recorder , weather monitoring station , solar cell based sunlight radiation meter , cut models of photo voltaic cell assembly , cut model of lead acid battery , lead acid battery , solar simulator for solar cell characteristic study , iv curve tester , sun path finder , solar energy trainer with grouping of solar cells , solar tracker demonstrator kit , solar pv elearning software using animations for training , halogen lamp with stand for illumination of solar panels in lab , motorized bench grinder , battery charger , solar photovoltaic module , solar panels , solar charge controller with dusk to dawn automatic switching , solar charge controller with manual switch day lighting , array junction box , solar lantern , solar lantern assembly sets , home light system , solar cell kit , clinometer , spirit level , anemometer , dc table fan , ac voltmeter mi , volt meter , ammeter mc , ammeter mccentre zero , power factor meter , dc led lamp , dc pump , pwm controller , mppt charge controller , inverter with battery , solar pcu , solar grid tied inverter demonstrator kit , solar street light , solar, wind and hybrid power plant , solar traffic light , used water treatment solar plant demonstrator kit , solar dc pump , demonstration kit for wind generation wind turbine with blower , wiring board //bid details 2 / 68

CTN :40902333

11 Jul, 2025 NA

Bidar - Karnataka

Tender For providing of calibration services - calibration of personal oxygen monitor; calibration of personal oxygen monitor; authorised lab; lab,calibration services - calibration of personal oxygen monitor; calibration of personal oxygen monitor; authorised lab; lab

CTN :40902803

21 Jul, 2025 NA

Kupwara - Jammu And Kashmir

Tender For tender for supply of veh monitoring device (rear camera) , lighter for camera charger , dc elect wire , hand grinder bosch , elect screw dvr 25mm taparia no 931 , chest tool box

CTN :38924592

18 Jul, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester

CTN :40855726

17 Jul, 2025 18.82 Lacs

Leh - Jammu And Kashmir

Tender For tender for supply of proc of nw monitoring tool to manage comn infra and nw to reduce downtime : : - network monitoring interacting tool , microsoft windows 11 professional , microsoft office 2021 professional or higher , antivirus 10 users , adobe pdf reader , delivery and installation

Oxygen Monitor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector