Get complete information related to latest Oxygen Pump Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Oxygen Pump Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Oxygen Pump Tenders.
Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod
Tender For annual maintenance estimate for main water works tosham road hisar (2026-2027) - annual maintenance of main water works tosham road hisar (2026-2027). “supplying, erection, testing and commissioning of horizontal centrifugal split casing pumping set of 2 nos. 6800 lpm 40 hp pump set and 3400 lpm pump set with motors including copper cable and control panels at main water works tosham road hisar and all other works contingent thereto” (including three years maintenance and defect liability period free of cost) a/c rs 17.80 lacs
Tender For procurement of spares of sam make lp water model annual repair 150 510 sl no 11611 to 11614 and recycle pump annual repair 150 510 sl no 11702 installed at ahp of unit no. 3 and 4, sgtps, mppgcl, birsinghpur - bearing housing, end cover, base & top cover, lantern restrictor, impeller with nut and bolts, outer casing, shaft with keys, volute (inner casing), wear plate (b.side) with insert, wear plate (s.side) with insert, shaft sleeve, split gland [1 no = 2 halves], expeller housing, expeller, dome nut (1 set=08 nos.) & t-bolt (1 set=06 nos.), suction cover, key (shaft sleeve / expeller), key (coupling), laybrinth (pump end), laybrinth (drive end), flange suction cover, grease retainer, piston ring set (1 set = 4 nos), lock nut, bracket side cover, coupling (dia 280 mm), fastener set, suction flange gasket (rubber gasket), .
Tender For chandi(93) , indragarh , group of 2 no. of habitations annual mtc.works for water supply. - carriage of burnt motor, labour for rottor grinding and balancing, motor opening and fitting, providing and fixing of bearing 6309 make skf for motor of various split casing horizontal pumpset, providing and fixing of coller ring, providing and fixing stud for clear water and raw water pump, rewinding of clear water motor
Tender For supply of pump body assly for tsh 10 pump part no 102p82024 , stuffing box ci tsh part no 203p82029 , main shaft en8 part no 201p382027 , impeller enclosed for tsh10 pump part no 101p82023a , part no 101p82023a impeller enclosed for tsh10 pump , werr rmgs tsh 10 part no 104p82026 , shaft sleeve bush aisi 410 part no 210p82036 , stuffing box bush tsh 10 part no 211p82037 , ci bearing housing part no 202p82028 , breg cover imp side ci tsh 10 part no 204p82030 , breg cover moy side 205p82031techno part no 205p82031 , inspection cover with funnel cock for tsh part no 103p82025 , lanternal ring gm part no 209p82035 , split gland gm for tsh 10 pump part no 207p2033 , motor side liquid deflector part no 206p82032a , gland plate ms part no 208p82034 , stud main casing en8 part no 301p82041 , stud for breg house part no 304p82041 , stud inspection cover en8 part no 311p82041 , stud gland en8 part no 307p82041 , sleeve nut impeller bolt impeller lock part no 212p82038 , set of domed nut part no 339p82041 , nut for main casing tsh 10 pump part no 302p82041 , nut for bearing housing for tsh 10 pump part no 305p82041 , nut for gland for tsh 10 pump part no 413p82041 , set of gasket for tsh 10 pump part no 405p82045 , suppt leg part no 213p82039 , oil seal for bearing nde tsh 10 pump big part no 403p82044 , rotating assy back pull out assy part no 407p82041c , pump body assy wearing ring insp cover part no 406p82041 , oil seal small tsh part no 404p82040 * /bid number : gem/2026/b/7599838 + /dated: 30-05-2026 ' ' / bid document 1 / 26
Tender For supplying, installation, commissioning and testing of horizontal split casing centrifugal pump set having discharge 2030 m3 per hr at total head of 122 meters with all its components for rukka pumping plant under d.w.and s. mechanical urban division,