Latest packing and jointing Tenders | Government packing and jointing Tenders

CTN :40026245

06 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of nickle graphite composite powder 308ns in 25 lbs packing , nickle aluminium composite powder 405ns in 20 lbs packing

Central Government/Public Sector

CTN :40010421

09 May, 2025 NA

Jhansi - Uttar Pradesh

Tender For jhansi division -bsz-gtm- ctr (p) - 36.51 tkm & jhansi division -gtm-bzm ctr (p) - 32.23 tkm-ns item :- a) running track site:- replacement of old sleepers and rails (ctr) by dismantling existing track of all types of sleepers by making 13m loose rail panel (or any suitable length panel) with existing sleepers & sh rail (for removing existing track) with wider base sleepers/revised wider base sleepers at density of 1660 sleepers per km assembled with loose rail panel (or any suitable rail length panel of sh rail) in pqrs depot and placing over ballast properly during traffic block after removing panels of old sleeper and sh rail of 13 m loose rail panel (or any suitable length panel) wth the use of contractor's pqrs machine by providing auxilary track with gauge of 3400mm (either with the use of existing rail from existing track or with new rail unloaded by contractor from eur in block as instructed by sse/p-way, (if required) over metal/ wooden sleepers, to be provided by railway, 500 nos./rail km on both rails at the interval of 2m) and providing fish plates for joining loose sh rail over wider base sleeper for continuity of track and maintaining track parameters as per para 522 of irpwm 2020 to keep the track fit for 30kmph. sh rail over new wider base sleepers/revised wider base sleepers to be replaced with newlearlier existing rail on running track (with replacement of rutbber pad, liner & greased erc and greasing of liner contract area. grease to be used should be of 'o' graphite grease as per s code 408). as soon as loose rail length of track reaches 500m/750nm (as per decision of railway site engineer ie. sseje/ p-way), loading of track panel (sh rail over old normal sleeper and tied with erc) of approximately 13 m length over railway wagons and unloading of track panels of the length of 13 m (or any suitable length) and wider base sleepers/revised wider base sleepers will be done during traffic block. trr with the rail of the length of 250 m to 500m (preferably 20rail panel) will have to be done as soon as track of loose rail exceeds 500m length. further the contractor wil follow instructions of sse/p-way to relax speed of track upto maximum speed of section as per schedule laid down in irpwm 2020 para 708 for machine tamping with all machine packing related works such as recoupment of crib ballast, shoulder ballast, boxing and dressing. the whole process wil continue ill completion of work. auxilary track (at) will have to be removed with advancement of ctr work as per direction of railway (sse/jeip-way). b) pqrs depot: track panel with sh rail of 13 m or any suitable length over wider base sleepers/revised wider base sleepers/revised wider base sleepers will be made with necessary fittings in pqrs depot. loading of these panels over railway wagons and unloading of released track panels (released from running track) consisting of all types of rails & sleepers from railway wagon at pqrs depot using contractor's own portal crane including dismantling and stacking each component of track properly at designated locations. (note: this item of complete track renewal with wider base sleeper is a composite item and all activities as required will have to be done by the contractor with his/her own pqrs machine & other machines, tools and plants including all other resources as per requirement of the work (in pqrs depot and during traffic block in running tack). ralway will provide wagons and locomotives free of cost for loading/unloading and transportation tofrom pors depot/work site (running track) for loose rail panels with normal old sleepers and with wider base sleepers/revised wider base sleepers. nothing extra will be paid except the rates as mentioned against the item. raiway will also provide metal/wooden sleepers required for at, free of cost. various activities which are involved in ctr work are elaborated in "sequence of activities provided with tender schedule." (unit- per track km.).

Central Government/Public Sector

CTN :40013171

06 May, 2025 14.71 Lacs

Singrauli - Madhya Pradesh

Tender For supply of gland packing of size 12mm , gland packing of size 14mm , graphite gland packing ropes

CTN :39996745

29 Apr, 2025 NA

Baghpat - Uttar Pradesh

Tender For supply of ferolite,champion,excel and spitman make packing and jointing for year 2025-26

CTN :39925996

16 Apr, 2025 21.75 Lacs

Jaisalmer - Rajasthan

Tender For supply of various item for water supply system at rgtpp ramgarh.-, hdpe pipe end preparation syitable to victaulic style 905 coupling, dn 110 sdr 13.6 pe 100 wall thickness 8.1 mm to 9.1 mm as per is 4984:2016 amendment 2, fr grade (fire resistant) made with pre compounded black virgin resin., , victaulic style 905 hdpe to hdpe coupling od=110mm. housing: ductile iron conforming to astm a536, grade 65-45-12.both end with retaining ring: type 316 stainless steel. nitrile (standard or flush-seal) gasket: epdm vicplus gasket. temperature range -30f to +230f/-34c to +110c. may be specified for cold and hot water service within the specified temperature range. metric fluoropolymer coated bolt and nut., , victaulic style 907 hdpe to metal coupling od=110mm. housing: ductile iron conforming to astm a536, grade 65-45-12.one end retaining ring: type 316 stainless steel, other end as per ogs (original grooved system) compatible. gasket: epdm vic plus gasket. temperature range -30f to +230f/-34c to +110c. may be specified for cold and hot water service within the specified temperature range. metric fluoropolymer coated bolt and nut., , victaulic grooved end fittings (bend, tee & reducer) moc: ductile iron conforming to astm a536, grade 65-45-12., , 90 degree elbow od : 114.3 mm, , 45 degree elbow od : 114.3 mm, , equal tee od: 114.3 mm, , concentric reducer: 114.3 mm x 88.9mm, , victaulic flange adapter moc: ductile iron conforming to astm a536, grade 65-45-12. gasket 10/4/2024 epdm (green stripe color code). temperature range -30f to +230f/-34c to +110c., , dn 100 (od= 114.3mm), , dn 80 (od: 88.9mm), , os &y gate valve:, , body: grooved end ductile iron conforming to astm a536 grade 65-45-12., , body coating: fusion bonded epoxy, ral 3000 color - red. body gasket: epdm body bolts: zinc plated steel. hand wheel: ductile iron conforming to astm a536 grade 65-45-12.handwheel nut: ductile iron conforming to astm a536 grade 65-45-12.os&y yoke: ductile iron conforming to astm a536 grade 65-45-12.yoke nut: bronze, conforming to astm b62.bonnet: ductile iron conforming to a536 grade 65-45-12.bonnet bolts: carbon steel conforming to grade 8.8, zinc plated. bonnet/body coating: fusion bonded epoxy. stem: type 304 stainless steel., , o-ring seals: nitrile, , gate: ductile iron conforming to astm a536 grade 65-45-12, epdm coated gate nut: type 304 stainless steel. packing: graphite gland: ductile iron conforming to astm a536 grade 65-45-12.body: ductile iron conforming to astm a536 grade 65-45-12.body coating: fusion bonded epoxy, ral 3000 color - red, , body gasket: epdm. body bolts: zinc plated steel. hand wheel: ductile iron conforming to astm a536 grade 65-45-12, , hydro test pressure body:- 31 kg/cm2, , hydro test pressure seat:- 21 kg/cm2, , note: - valves should be supplied with both ends grooved & flanges compatible with grooving., , dn 100 (od= 114.3mm),

CTN :39946605

21 Apr, 2025 NA

Mumbai - Maharashtra

Tender For supply of samson spares at bpcl mumbai refinery - 59.76.16.559.5 - plug and stem samson 2 model 3241 , 59.76.22.025.5 - ptfe packing 2 0430-0404 samson , 59.76.22.026.5 - body gasket 2 8414-1488 samson , 59.76.22.027.5 - diaphragm seal kit 1137-7774 samson , 59.76.22.030.5 - ptfe packing 6 0430-3156 samson , 59.76.22.031.5 - body gasket 6 0430-3685 samson , 59.76.22.032.5 - diaphragm seal kit 1137-7776 samson , 59.76.22.036.5 - body gasket 3 8414-1493 samson , 59.76.22.038.5 - graphite packing 3 0430-0975 samson , 59.76.22.039.5 - body gasket 3 8414-1493 samson , 59.76.22.042.5 - diaphragm seal kit 1137-7775 samson , 59.76.22.045.5 - ptfe packing 6 0430-3155 samson , 59.76.22.046.5 - gasket 6 8414-1501 and 8414-1496 samson , 59.76.22.048.5 - graphite packing 6 0430-0867 samson

CTN :39946715

18 Apr, 2025 6.69 Lacs

Garhwa - Jharkhand

Tender For supply of heavy duty jetting hose , sluice valve , non return valve , foot valve , ms flange , washer , graphite gland packing , ms flange

CTN :39936734

21 Apr, 2025 NA

Salem - Tamil Nadu

Tender For arresting hot air passing from mill under bowl area by providing new pure graphite rope gland packing around the carbon seal seating area of mill under bowl in any of the 8 coal mills

corporations/Associations/Others

CTN :39934278

21 Apr, 2025 NA

Salem - Tamil Nadu

Tender For mtps- ii mill plant division arresting hot air passing from mill under bowl area by providing new pure graphite rope gland packing around the carbon seal seating area of mill under bowl in any of the 8 coal mills.

State Government

CTN :39794800

16 Apr, 2025 3.64 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : procurement of graphite seal ring with anti-extrusion ss cap and gland packing ring for various valves used in boiler of 2x660 mw sstpp dongalia

Packing And Jointing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government