Latest packing jointing Tenders | Government packing jointing Tenders

Central Government/Public Sector

CTN :45471079

19 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of spares for 1600 hp demu/emu/memu wheel set assembly - cannon tube, ral 9005, sealing ring ls-ws, ral 9005, labyrinth ls-ws, ral 9005, cover ring ls-ws, ral 9005, labyrinth ring ls-ws inner, labyrinth ring ls-ms inner, sealing ring ls-ms, ral 9005, bearing cover ls-ms, ral 9005, cover ring ls-ms, ral 9005, earthing blind cover, ral 9005, cover ls-ms outer, ral 9005, cover ls-ms inner, ral 9005, adjustment segment (2 nos), rotary shaft lip seal, 270-310-16 (2 nos), rotary shaft lip seal, 280-320-20, rotary shaft lip seal, 220-260-15, lubricating nipple, m8x1 (4 nos), o-ring, 310x2,5, o-ring, 332x4 (2 nos), screw plug, screw plug, m12, yellow - set of 12 nos, grease plate ls-ms, hexagon head cap ribbed flange bolt,, hexagon head cap ribbed flange bolt,, regreasing nipple cap, yellow (8 nos), slip ring, grounding contact, hexagon socket screw, m10x30, washer, type plate

CTN :45543820

04 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of amp dp , mcb 32 amp dp , pvc round block , main switch 32 amp with spn 240v , change over switch 32 amp dp , angle holder , mcb box 6 way spn , solar lantern 10 watt , exhaust fan pvc body square type frame with louvers shutter , exhaust fan 450 mm sweep , pvc switch board 6 points , earthing plate gi 600 x 600 x 6 point 3mm , ci cover with frame 300x300x10mm with locking arrangement , gi pipe 20mm dia medium grade isi marked for watering , gi pipe 40mm dia medium grade , gi strip 25 mm x 4mm 15m long , gi reducer 40 x 20mm dia isi marked , ms rod 6mm dia 2 ft long , charcoal dust , common salt , gi funnel with wiremesh , 5 mm dia 30 mm long gi bolt with nut , lightning rod , air termination single pointed copper rod 12mm dia and 300mm long , gi pipe 100 mm dia, 2.00 mtr long medium grade with base plate , back fill compound of non corrosive granulated obelique gel form chemical and hygroscopic gel conductive mineral 10 kg bag , ci manhole cover of size 30 cm x 30 cm x 7 mm thick with frame , aluminium strip 25 x 3 mm , gi strip 32 x 5 mm , gi strip 32 x 6 mm , iron spikes 18 inch long 10 mm dia , gi nipple 20 mm dia and 10 cm long , lightning terminal copper with 05 nos prong 15 cm long , ms clamp 40 x 2 mm with nut and bolt complete , gi wire 3 mm dia , gi reducer socket 40mmx20mm , gi pipe 40 mm med grade isi marked , insulator for fixing down conductors , synthetic enamel paint 1st quality , oil bond distemper 1st quality in off white colour , taurpentine oil , paint brush 75mm , panting brush 50 mm size , fan hook made of 12 mm ms round bar to be hanged from purlin , texture finished gypsum board false ceiling panel of size 595 x 595 mm x 8 mm thick with water proofing film on back side , texture finished gypsum board false ceiling panel of size 600 x 600 mm 9 mm thick with water proofing film on back side , ms binding wire 0 point 90mm dia , integral water proofing compound , vitrified coloured floor tiles of size 600 x 600 x 10mm , anti- skid coloured floor tiles of size 300 x 300 x 7 to 8mm , white cement , leak proof compound , synthetic enamel paint og colour 1st quality , synthetic enamel paint brown colour 1st quality , red oxide zinc chromate primer for metal surfaces , wooden primer white colour , weather coat exterior emulsion , mild steel chromium plated 25mm dia and 3mm thickness drapery rod with both end decorative end brackets and knobs of 1 point 30 mtr long , chair revolving with designed fabric upholstered type , chair office cushion , office table , office table steel , pvc chair with arms , mild steel dunnage , steel racks , steel almirah , workstation table comprising 04 independent unit modular type tables as per drawing

CTN :45519945

22 Jun, 2026 37.35 Lacs

Chhabra - Rajasthan

Tender For requirement of spares of m/s ingersoll rand make conveying air compressor model r-160i-x 7.5wc and up5-22-7 for dry fly ash dense phase system,unit#3 and 4, ctpp, chhabra - model no. r160i-x7.5 wc, seal, shaft high pressure part no. 89292445, element, seprator tank 18 inch part no. 23566938/ 23545841, oil cooler, water cooled part no.23572415, after cooler, water-cooled part no.23572423, cap screw m6x25 soc hd cap w/nylon insert part no.22168710, pressure transducer 0-225 psig part no.47545275001, pressure transducer 0-15 psig part no.47560902001, assembly gear set 160 kw single stage 7.5 bar part no.23521859, pin dowel [motor] part no.39194915, pad pre filter part no.23523772, actuator service kit part no.23467251, inlet valve part no.23421217, elbow 1/4" 90 degree straight thread ms part no.96757604, spacer gear (ce177g) part no.39326483, sleeve motor shaft 4.25 od m132/160 part no.89292478, key,square both ends 0.88sq x1.25 part no.95135638, valve in line check part no.23453020, tube gear case scavenge part no.23453129, air cleaner assembly nlg37-42 pico standard part no.23390156, ultra coolant (208 litres) drum part no.39433743, key, rect one round end part no.96759212, clamp, plate part no.35295336, screw, socket head part no.32555819, housing, seal part no.22880744, gasket, gear case part no.39454558, pin, dowal [air end] part no.35295336, valve, orifice [separator tank] part no.23449200, oil filter assembly part no.23523434, o ring set part no.ok002222, pressure transducer cable part no.23529373, temprature sensor part no.23522246, valve min press check 132-160 kw part no.23521297, 5sv solinied cable part no.23562432, model no. up5-22-7, element coolant filter part no.54672654, element seprator 194cfm (spin-on) part no.54749247, pad pre filter part no.22053722, element air filter part no.89295976, kit, inlet valve repair part no.22067177, kit-mpcv part no.22064695, kit thermal valve repair part no.22393326/ 22832885, valve solenoid 125 inch npt part no.54774302, valve solenoid 1/2 in npt 110 volt part no.54654652, spring gas part no.54749114, elbow .31tx .50sae part no.95993572, elbow , 90deg male 37a10c3xz2 part no.95937686, tube oil feed (rear bearing) part no.85581858, tube, vmc block to bare part no.85581866, belt part no.89265052, ultra coolant (20litres) drum part no.38459582, tempreture sensor part no.22137848, conteroller part no.22128763, tube nylon part no.39124813, tube nylon part no.39124821, elbow part no.39155650, elbow part no.39155577, nipple part no.22354989

CTN :45472950

22 Jul, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of set of spares of msu components for 1600 hp demu/dpc make cgl (one set consisting 23 items as per annexure 'b'enclosed) - suspension tube mechnied, taper rolling bearing, taper rolling bearing, abutment washer, abutment piece, bearing housing, end cover, gear case cover, gear case labyrinth, outer labyrinth, labyrinth gwe, inner labyrinth rwe, shaft seal, gease nipple, hex hd bolt m12 x 70, disc lock washer, hex hd bolt m10 x 25, disc lock washer, end sleeve, plug g ½", plug ms, o ring suspension tube, o ring for gear case cover

CTN :45519531

13 Jul, 2026 40.00 Lacs

Guna - Madhya Pradesh

Tender For supply of water supply pipe line hand pump bore well repair anf repairing material under np raghogarh - water supply materiasl, cid joint 80mm dia class 15, cid joint 100mm dia class 15, cid joint 80mm dia class 10, cid joint 100mm dia class 10, ci sluse valve 50mm dia heavy duty, ci sluse valve 80mm dia heavy duty, ci non return valve 50mm dia heavy duty, rubber packing sheet, nut bolt all size, ci flang 50mm dia heavy duty, ci flang 80mm dia heavy duty, threst plate, acp pipe 150mm dia class15, hand pump rod socket 12 mm, hdpe pipe 75mm dia pe100/10kg, starter oil p, gi pipe 32mm dia with socket class b heavy duty 5 kg/rmt, gi pipe 50mm dia with socket class b heavy duty 8 kg/rmt, gi socket 50mm dia seamless, gi socket 50mm dia, gi bend 50mm dia, gi clamp 50mm dia 150mm length, main switch 63 amp., main switch 100 amp., gi nipple 50mm dia 100 mm length, gi redeuser 50mm x 75mm, copper cable 3 core 16 sqmm (falcon or finolex make), bore cap 6 inch, bore cap 8 inch, gi end cap 2 inch, gi end cap 3 inch, submerciable moter pump single phase 3 hp 160m., gi elbow 2 inch, gi elbow 3 inch, gi/ci t 2 inch, gi/ci t 3 inch, cpbc pipe heavy duty 16mm dia, handle hand asembly compleate, padestanal heavy duty, water chamber, ci cylender heavy duty (deep well), upper valve assembaly compleate, check valve assembaly compleate, ms rod 3m - 12mm, hexagonal nut bolt, chain nut bolt, chain with cupler, handle excell, bearing 6204 heavy duty\, naitril washer, leather washer, rubber sealing ring, uppor valve guide seat, submercible motor pump 15 hp motor 12 stage pump (falcon /texmo/cri or equelent make), starter 1 hp to3 hp switch penal, starter 10 to 15 hp delta, control penel board oil starter 20 to 35 hp (two button), control penel board oil starter 20 to 35 hp (trhee button), rubber ring 80 mm, rubber ring 100 mm, auto switch 7 wire semi, 9 wire wth, pvc cable 3x4 sqmt standard make (falcon /finolex or equlent make), pvc cable 3x6 sqmt standard make (falcon /finolex or equlent make), copper cable three core 16sqmt standard make (falcon/finolex or equlent make), nariyal rassa, pvc rassa, teflon tap, clamp 1/2 ", clamp 1 ", clamp 1 -1/4", clamp 2", clamp 2-1/2", clamp 3", black roll pipe 3/4 ", black roll pipe 1", black roll pipe 1-1/4", tala 50mm, tala 60 mm, tala 75 mm, penchkas, plaash, pipe rinch 12 ", 18" & 24", 7/16 coper wire, 1.5 coper wire, 1" over flow footwall, 63 a. kit kat, 100 a. kit kat, 63a. m.c. b. for pol, 100a. m.c. b. for pol, 125a. m.c. b. for pol, 1 hp open well moter ci body, over head tank 1000l.

Central Government/Public Sector

CTN :45306043

20 Jun, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm di

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45516651

20 Jun, 2026 NA

Palwal - Haryana

Tender For tender for annual rate contract of various type and sizes of all type of packing, jointing and asbestos rope as per their latest rate list till the end of crushing season 2026-27.

CTN :45499694

01 Jul, 2026 NA

Jalandhar - Punjab

Tender For supply of plain glass sheet 6 feetx4 feet x 4mm , plate rack stainless steel 31inch x 24 inch x 10 , bitumen tape 85x25 50kg bag , low level cistern pvc 10 ltr cap , hydraulic door closer cast iron non porous body single speed , cp heatlh faucet set 1.5m tube with hook , pbs tarfelt roll , bath room corner glass shelves 9inch , pu bag 10ltr pack , bitumen tape 4x10mtr , cp toilet paper holder , bitumen pothhole tramix premix , float valve ptmt 20 mm , cp shower with arm 75mm , pvc connection pipe with cp nuts 18inch , looking mirror 600mmx450mmx5mm thick glass , cp towel rack 600 mm , float valve pvc 15mm , bath room glass shelves 18inch , bathroom mirror cabinet of size 522mm x 350mm , union gi 15 mm , soap dish ss of size 5 inch x4 inch , bath room corner glass shelves 24inch , pvc connection pipe with cp nuts 24inch , pvc connection pipe with cp nuts 12inch , bath room corner glass shelves 12inch , pvc water storage tank 1000 ltr capacity , plastic seat cover for wc white , pvc water storage tank 500 ltr capacity , cp telephonic shower with 1.5 mtrs tube , gi tubing15 mm , pvc waste pipe flexible 40mm x 800 mm , multi polyplus 1mtr x 20 mtr length x 0.80 mm upto 2 mm , bitumen felt sheet , helical door spring size 150 mm , galvanised steel wire cloth 0.45 to 0.5mm nominal dia of wire , permanent cold patch material packed in 25 kg poly bag , cp hand shower 1.5m tube with hook , gi socket 20mm , pvc waste pipe flexible 32mm x 800 mm , sliding door bolt 200mm aluminium , gi nipple 20 x 100mm , looking mirror 48 inch x 15 inch x5mm for table dressing , gi elbow 15mm , cp urinal spreader 15mm , gi socket 15mm , ply wood commercial bwr of size 8 feet x 4 feet x6mm thick , gi elbow 20mm , sliding door bolt 300mm ms , paint road marking white , gi union 25 mm , end plug 15mm , shelf acrylic 13 inch long 4 inch width size with 6 nos brush , gi tank nipple 20 mm , ptmt toilet paper holder , bow handle aluminium 150mm , sliding door bolt 250mm aluminium //bid details 2 / 46

CTN :45499697

01 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of iron manhole cover 600x600mm , glass pane clear sheet 3mm thick , gi tubing15 mm med grade , cp health faucet with 1.5m tube and hook , cp mortice lock 63mm 6 lever with duplicates key , gi tubing 20 mm med grade , bathroom glass shelves 24inch , pre-laminated mdf board interior quality 8feet x 4feet x19mm thick , cp brass shower rose 15x100mm dia , plywood commercial bwr 8feet x 4feet x 4mm thick , ss sheet plate rack 31inchx24inchx10 inch a , plywood commercial bwr 6feet x 3feet x 12mm thick , door handle ms owel type 100mm , ss kitchen sink with drain board of size 32x20x8 inch , ss kitchen sink of size 16 inch x 18 inch , bathroom corner glass shelves 12inch , cp soap dish of size 5inchx4inch , bathroom glass shelves 18inch , cp jet spray with flexible tube , plasticseat cover for wc white , spindle for bib tap 15mm , bathroom corner glass shelves 9inch , frosted glass 4mm thick , oil putty for glazing , cp toilet paper holder , pvc connection pipe with cp nut 12inch , syphon kit for pvc low level cistern 10ltr cap , ptmt float valve 20 mm , ptmt float valve 25mm , galvanised steel wire cloth 0.45 to 0.5mm nominal dia of wire , ptmt float valve 15mm , cp towelrail with brackets 600mm , sliding door bolt 300mm aluminium isi marked , helical door spring ms size 150 mm , sliding door bolt 250mm aluminium isi marked , water tank cover 500ltr capacity , galvanised steel wire cloth 0.45 to 0.5mm nominal dia , plumbing tape , white wash lime , whb chinaware 22inchx16inch complete , water tank cover 1000ltr capacity , hinges 100mm stainless steel , gi union 20 mm , pvc waste pipe flexible 32mm , pvc waste pipe flexible 50mm , sliding door bolt 250mm ms isi marked , cp towelrail with brackets 450mm , door stoper aluminum 150 mm , pvc waste pipe flexible 40mm , prelaminated particle board exterior quality 9 feet x 6feet x 18mm thick , cp urinal spreader 15mm , gi nipple 15 x 75mm , gi nipple 15 x 100mm , gi union 15 mm , gi tee equal 20mm , bow handle aluminium 125mm , gi tee equal 15mm , hasp and staples aluminium 100 mm , gi nipple 15 x 50mm , white cement , gi elbow 20mm , gi elbow 15mm , cp grating 100mm , sliding door bolt 300mm ms isi marked , gi tank nipple 20 mm , gi socket 15mm , gi nipple 15 x 150mm , hasp and stapple 100mm ss , bow handle aluminium 100mm , pvc vent cowl 75mm , gi socket 20mm , pvc waste pipe plain 40 mm , pvc reducer 15x100mm , gi socket reducing 15 x 20mm //bid details 2 / 61

Packing Jointing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector