Latest packing plate Tenders | Government packing plate Tenders

Central Government/Public Sector

CTN :45555813

17 Jul, 2026 NA

Jodhpur - Rajasthan

Tender For supply of steel packing plate 13 mm to icf drg. no. icf/sk-0-1-193 alt. f/8, item-8. matl. & spec. as per drg. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45550003

29 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of 12 mm packing plate for height adjustment on casnub bogie, to drawing/specification rdso drg. no. wd-91074-s-1, alt.4 item no.1. specification -as per drawing attached. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

Central Government/Public Sector

CTN :45470953

17 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For manufacture and supply of fabricated anti-creep device for 10125 mm curved switches with zu1-60 thick web tongue rails b.g. (1673 mm) for 60 kg (uic) on psc sleepers as per rdso drg. no. rdso/t-8782 & rdso/t-8783 complete with fittings (including 27mm dia. hts bolt with nut to drg. no. rdso/t-8786 & rdso/t- 8787 and hardened packing plate to drg. no. rdso/t-8784 & rdso/t-8785) acd material shall be structural steel confirming to the requirement of grade e-350/br of is: 2062-2011 "indian standard hot rolled medium and high tensile steel - specification" (seventh revision). note :- (i) the 27 mm dia. hts bolts & nuts shall confirm to is:3757 & is:6623 and shall be manufactured by rdso approved vendor for hts bolts & nuts. the dimension of hts bolts & nuts shall be as per drawing no.rdso/t-8786 & rdso/t-8787. these bolts & nuts shall be arranged and supplied by the supplier/tenderer.(ii) hardened packing plate shall confirm to is:6649 & material 45c8 steel according to is:1570 (part-2). the dimensions of hardened packing plate shall be as per drawing no. rdso/t-8784 & rdso/t- 8785. hardened packing plate shall be arranged and supplied by the supplier/tenderer. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45078002

25 Jun, 2026 NA

Multi City - Multi State

Tender For corrigendum : manufacture and supply of fabricated anticreep device for 10125 mm curved switches with zu-1-60 thick web tongue rails b.g. (1673 mm) for 60 kg (uic) on psc sleepers as per rdso drg.no. rdso/t-8782 & rdso/t-8783 complete with fittings (including 27 mm dia. hts bolt with nut to drg. no. rdso/t-8786 & rdso/t-8787 and hardened packing plate to drg. no. rdso/t-8784 & rdso/t-8785) acd material shall be structural steel confirming to the requirement of grade e-350/br of is: 2062-2011 "indian standard hot rolled medium and high tensile steel - specification" (seventh revision). notes : (i) the 27 mm dia hts bolt and nut shall be confirm to is :3757 & is:6623 and shall be manufactured by rdso approved vendor for hts bolts & nuts. the dimension of of hts bolts and nuts shall be as per drawing no. rdso /t8786 & rdso/t-8787 . these bolt and nuts are shall be arranged and supplied by the suppliers /tenderers . (ii) hardened packing plate shall confirm to is : 6649 and material 45c8 steel according to is:1570 (part 2). the dimension of hardened packing plate shall be as per drawing no. rdso/t-8784 & rdso/t-8785. hardened packing plate shall be arranged and supplied by the suppliers /tenderers. (the alteration in drawing and specifications issued by rdso up to one month prior to tender opening date shall be applicable to this tender.) [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45454990

25 Jun, 2026 NA

Multi City - Multi State

Tender For manufacture and supply of fabricated anticreep device for 10125 mm curved switches with zu-1-60 thick web tongue rails b.g. (1673 mm) for 60 kg (uic) on psc sleepers as per rdso drg.no. rdso/t-8782 & rdso/t-8783 complete with fittings (including 27 mm dia. hts bolt with nut to drg. no. rdso/t-8786 & rdso/t-8787 and hardened packing plate to drg. no. rdso/t-8784 & rdso/t-8785) acd material shall be structural steel confirming to the requirement of grade e-350/br of is: 2062-2011 "indian standard hot rolled medium and high tensile steel - specification" (seventh revision). notes : (i) the 27 mm dia hts bolt and nut shall be confirm to is :3757 & is:6623 and shall be manufactured by rdso approved vendor for hts bolts & nuts. the dimension of of hts bolts and nuts shall be as per drawing no. rdso /t8786 & rdso/t-8787 . these bolt and nuts are shall be arranged and supplied by the suppliers /tenderers . (ii) hardened packing plate shall confirm to is : 6649 and material 45c8 steel according to is:1570 (part 2). the dimension of hardened packing plate shall be as per drawing no. rdso/t-8784 & rdso/t-8785. hardened packing plate shall be arranged and supplied by the suppliers /tenderers. (the alteration in drawing and specifications issued by rdso up to one month prior to tender opening date shall be applicable to this tender.) [ warranty period: 30 months after the date of delivery ][ rate of supply 138 units per month , commencement time allowed -1 day ]

Central Government/Public Sector

CTN :45422328

15 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of door assembly for boxns wagon with door coupling & packing plate rdso drg. no. wd-18059-s-02 alt latest item no. 1 to 14 & wd-18059-s-01 alt latest, item no. 3 & 8 with complete assembly and wd-14014-s-20 alt 1 or latest item no. 1 to 14 & wd-14014-s-24 alt 1 or latest, item no. 1&2 with complete assembly. [ warranty period: 30 months after the date of delivery ] ]

CTN :45393072

16 Jun, 2026 NA

Jamalpur - Bihar

Tender For supply of kit of packing plates for bogie shop (detc) consisting of six items (1) packing plate2 x 65 x 170. drg. dmu/tc4-0-5-406, item-1; qty.= 6 nos (2) packing plate for axle box guide arrgt.drg. emu/m-0-1034, item-1; qty= 16 nos (3) bracket for pipe clamp 1 od drg- icf/mrvc/m/bt-0-5-004 col-1, item-1; qty.= 4 nos (4) flat for duplex check valve, drg. icf/mrvc/m/bt-0-5-005, item-1; qty.= 1 no. (5) brake block adjuster 6 x 35 x 150. drg. emu/m-3-2-027 alt-a/4; qty=8 nos. (6) brake beam hanger 6 x 40 x 215drg. emu/m-3-2-026 alt-a/5; qty= 8 nos. [ warranty period: 30 months after the date of delivery ] ]

CTN :45367284

19 Jun, 2026 51

Visakhapatnam - Andhra Pradesh

Tender For supply of 21vmuc007 d d - gasket , plate , piston , pressure line straightitem no.060.801/01 , oil control ring , ring sealing a12x15.5 , transition socket , pin spring , grommet , o ring , o/h kit fuel pump , shaft assembly , serv kit , plug , brg set , clamp , hub assembly , retainer , arm asm , element , core assembly , filter element lub oil(lcm) , injector asm (n70) , guide , clip , oil filter element , coupling element , turbo repair kit , actuator vlv , rubber mount , microswitch , o ring , molykote paste g-n plus , gasket liquid loctite 573 , clamp , lub oil pump , oil line , cylinder head with valve , clamp , pressue reducer valve , solenoid valve , angular slide thermo , air starter , gasket , nozzle holder with nozzle , woodruff key , valve , packing plate , spare parts kit , screw , sealing tube

Central Government/Public Sector

CTN :45254792

10 Jun, 2026 NA

Jaipur - Rajasthan

Tender For supply of packing plate for axle box guide arrangement as per icf drg no. emu/m-0-1-034,item.2 ,alt-'c' or latest as per drg.no. icf drg.no. emu/m-0-1-034,alt-'c' or latest specn [ warranty period: 30 monthsafter the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Packing Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector