Latest packing sheet Tenders | Government packing sheet Tenders

Central Government/Public Sector

CTN :43591840

19 Jan, 2026 NA

Chennai - Tamil Nadu

Tender For supply of rake set of seats for trainset to below details : i) for mc, mc2 and tc coaches to qty 12 sets. each set consists of seats to drg no.ts/dtc-6-1-001, alt-g, col-2, except items 12, 14 and as per specification icf/md/spec-367,rev-02. ii) for dtc coaches to qty 2 sets. each set consists of seats to drg.no. ts/dtc6-1-001, alt-g, col-1, except items 11, 13,17 & 24 and as per specification icf/md/spec-367,rev-02. and iii) for ndtc/ec , ndtc/ec2 coaches to qty 2 sets. each set consists of 180 degree rotation seats for executive chair car to drg.ts/ndtc/ec-6-1-001, alt-f, col-i, except item 6 , 8 and as per specification icf/md/spec-366,rev-03. note for spare: one spare set of following items per rake set of purchase order to be supplied in separate packing. (1) 3 seater rh to drg. no 889-6-1-002, alt-e,item - 5 = 9 nos (2) 3 seater lh to drg. no 889-6-1-002, alt-e,item - 4 = 9 nos (3) 2seater rh to drg. no. 889-6-1-002, alt-e,item - 3 = 12 nos (4) 2 seater lh to drg. no 889-6-1-002, alt-e,item - 2 = 12 nos (5) single seater lh to drg 889-6-1-002, alt-e,item - 1 = 1 no (6) 2seater (180 degree rotation) to drg. no 893-6-1-001,alt-f,item-1= 8 nos (7) tip up seat to drg. no 889-6-1-004, alt-e,item - 1 = 1 no and (8) folding seat to drg.no 889-6-1-004, alt-e,item - 2 = 3 nos. please visit icf vendor portal for downloading draw ing https://vp.icf.gov.in/vendtendordetnew.php using key: 0725fxyszpp3178 [ warranty period: 84 months after the date of delivery ]

Central Government/Public Sector

CTN :43593214

27 Jan, 2026 NA

Jhansi - Uttar Pradesh

Tender For design manufacture and supply of high tensile aar h type tight lock centre buffer coupler head with transition screw coupling and its associated components for fitment on broad gauge passenger coaches of indian railways as per rdso.specn.no. rdso/2009/cg-22, rev -01 one coupler set shall consists of the following 1.tight lock coupler head with transition screw coupling and its associated components 1 no rdso approved firm drgs. 2.balanced draft gear with pivot pin 1 no rdso approved firm drgs. 3.supporting device for coupler head with m20 fasteners 1 no rdso approved firm drgs. 4.manual uncoupling device with m12 fasteners 1 no rdso approved firm drgs. 5.rear carrier plate for draft gear with m16 fasteners 1 no rdso approved firm drgs. 6.front carrier plate for draft gear with m16 fasteners 1 no rdso approved firm drgs. special condition : 1. maintenance manual in soft copy and hard copy shall be supplied with item. 2.necessary test certificates as per rdso.specn.no. rdso/2009/cg-22 (rev -01) shall be supplied with item. 3. amd-01 of rev.03 or latest revision of specification rdso/2011/cg-03 referred in rdso/2009/cg-22, rev -01 or latest shall be followed.4. tenderer to submit rdso approved drawings at the time of quoting the tender. 5. packing condition: items are to be packed in two different boxes as given below. i. list of items to be in box-1 1. balanced draft gear with wedge block assembly & wedge block. 2. rear carrier plate 3. fornt carrier plate 4. fasteners for front and rear carrier plates. ii. list of items to be in box-2 1. coupler head and associated components. 2. main pivot pin. 3. supporting device for coupler head. 4. fasteners for supporting device. 5. manual coupling device 6. fasteners for manual uncoupling device. 7. split pinsfor carrier plate. 8. balance items, if any.. instructions for packing of fasteners. 1. box-1: item-4 2. box-2, item-4,6 & 7/ each to be packed and sealed separately in transparent polythene cover of minimum 200 microns with appropriate description labels kept inside for easy identification. stiffener plates must be supply as rdso letter no. no. mc/blb/cbc date: 01.11.2025. [ warranty period: 84 months after the date of delivery ]

Central Government/Public Sector

CTN :43591571

20 Jan, 2026 NA

Kapurthala - Punjab

Tender For set of carline assly. for lhb power car note: crf items are to be manufactured as per dy. cple-iii letter no. mpsh/510003/lhb dated 04/04/2024, as per drawing: mp09lpcar version 5, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure insuch a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to be placed between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure tobe fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standardclamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remainingreturnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43591572

20 Jan, 2026 NA

Kapurthala - Punjab

Tender For supply of set of ermeto fittings for plumbing of lhb buffet coaches., as per drawing: mplefbuplubfur version 6, packing instruction: set of ermeto fittings:- each item of the set should be packed individually after covering the threaded portion with suitable cap to prevent thread damange in bio-degradeable polythene packet invariably clearly mentioned the part no. of the item on it. all the items of set then collectivelly packed in cardboard box of sufficent strength, further tied with suitable no. of nylon strips. a well protected list should be pasted on each box bearing purchase order no, pl no., description, drg./spec./part no., qty., firm's name & address, date of despatch etc. the transit damange if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43591573

20 Jan, 2026 NA

Kapurthala - Punjab

Tender For supply of emergency foot step for namo bharat rapid rail, as per drawing: 96424001 col-i alt nil, packing instruction: no special packing required. the protruding, threadedportion, gauges and loose items etc. if any are to be protected with suitable covering to prevent it from damage. however transit damage if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43591678

20 Jan, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for bangladesh ac chair car coaches., as perdrawing: mp25paraccbang version 0, packing instruction: `packing condition of set ofpartition frame and procedure to achieve best possible protection duringtransportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plastic film or water proof ability paper, to guard against corrosion. 4. component arrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitablypacked separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions andfirm's & destination details. 7. loading onto trailer/lorry/truck/transport: -strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43591936

13 Feb, 2026 NA

Kapurthala - Punjab

Tender For supply of set of under frame items for lhb scn coaches, as per drawing: mp24ufscn version 1, packing instruction: pi100 ver1.0. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43592418

19 Jan, 2026 NA

Kapurthala - Punjab

Tender For supply of feeder juction box for bangladesh coaches, as per drawing: edml-261, rev. 0, packing instruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note-1.the item &its packing shall carry a qr code(optional) containing the details as listed below (qr code(optional) to beaffixed near name plate of item &on top of packing) a)name of the manufacturer b)purchaseorder number c)purchaseorder date d)uniqueserial number (or lot number for bulk items) of the manufacturer or e)dateof manufacture f)deliverychallan no. g)deliverychallan date 2.the qr code(optional) shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. 3.in case the above details are not available, or the qr code(optional)s are not readable, thesupplied material is liable to be rejected. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43535326

20 Jan, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply and fitment of furnishing items for wjcc coaches of bangladesh railways. note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/emp/1 dated.01.04.2025. spares items shall provide in individual vacuum sealed packing with labeling., as per drawing: mdts-26424 along-with annexure-wjjc coach ver-nil as per design l.no. md47121 dated 24.12.2025., packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 36 months after the date of delivery ]

Central Government/Public Sector

CTN :43590792

20 Jan, 2026 NA

Kapurthala - Punjab

Tender For supply, testing and commissioning (including all connections and dressing w/o loading) of switch board cabinet for bangladesh ac coaches, as per drawing: rdso/pe/spec/ac/0184-2015, rev-1 with rcf annexure br-01 , packing instruction: electrical panels to be protected with transparent biodegradable polythene bag/sheets thickness of 0.1 mm or an antistatic bag of 350 to 400 gauge (100 micron approx.) on all sides of panel &panel shall be packed in transport worthy wooden cage. bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden batons of size 100x100mm of suitable length to facilitate lifting by fork lifter &secure properly with suitable packing to avoid in-transit damage. each panel to be packed in transport worthy wooden cage of suitable dimensions made out of wooden strip of 20x100 mm size. gap between each strips should not bemore then 100mm.a list should be pasted on each wooden cage showing order no, pl no, description, drg /spec. no, qty, firm'name &address, consignee name, date of dispatch, top bottom arrow mark etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a)name of the manufacturer b)purchase order number c)purchase order date d)unique serial number (or lot number for bulk items) of the manufacturer or e)date of manufacture f)delivery challan no. g)delivery challan date 2. the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 30 months after the date of delivery ]

Packing Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors