Latest packing spares Tenders | Government packing spares Tenders

Corporations/Associations/Others

CTN :45526721

29 Jun, 2026 1.84 Lacs

Channarayapatna - Karnataka

Tender For annual supply of pipe materials and other spare parts for water supply section of tmc channarayapatna - hand pump- bearing, hand pump bucket bush, two inch pvc cd joint collar, two and half pvc cd joint collar, three inch pvc cd joint collar, four inch pvc cd joint collar, six inch pvc cd joint collar, six inch pvc collar, four inch pvc collar, three inch dp, four inch dp, six inch dp, three by four inch volve packing, oe inch volve packing, one hundred twenty to twentysix inch ring set, thirtysix inch rinch, eighteen inch rinch, fourteen inch rinch, twelve inch rinch, hand pump cylinder, hand pump connecting rod, hand pump bolts and nuts 18 size, hand pump water body, hand pump handles, hand pump- chain, double hand spanner set, cutting player taparia (small), cutting player taparia (big), screw driver taparia 6 inch, screw driver taparia twelve inch, grease gun, hacksaw frame with blade isi, hacksaw blade1, chargeable hand torch, hammer-3 pounds, hammer-five pounds, hose pipe- one and half inch, hose pipe two inch, hose pipe two and half inch, hose pipe three inch, gland packing, three inch air valve, four inch air valve, six inch air valve, sixty hp motor bearing, metal paste1, single phase 1 hp isi mark motor, five by eight into two and half inch bolts & nuts, three by four into two and half inch bolts & nuts, half inch volve packing, three inch pvc elbow isi mark, two into two one by two inch pvc reducer isi mark, two and half into three inch pvc reducer isi mark, three into four inch pvc reducer isi mark, six into four inch pvc reducer isi mark, two inch pvc collar isi mark, two and half inch pvc collar isi mark, three inch pvc collar isi mark, four inch pvc collar isi mark, six inch pvc collar isi mark, solvent cement (gum), transformer oil1, bearing grease1, bunnian waste, m-seal, leather sheet1, five hp ten stage isi mark motor and pump, six hp eight stage isi mark and pump, two point five mm submersible cable, rubber insulation sheet, three inch pvc bend isi mark, four inch pvc bend isi mark, six inch pvc bend isi mark, two inch pvc elbow isi mark, two and half inch pvc elbow isi mark, fourinchpvcelbowisimark, six inch pvc elbow isi mark, two inch pvc tee isi mark, two and half inch pvc tee isi mark, three inch pvc tee isi mark, four inch pvc tee isi mark, six inch pvc tee isi mark, two inch pvc valve isi mark, two and half inch pvc valve isi mark, three inch pvc valve isi mark, four inch pvc valve isi mark, six inch pvc valve isi mark, two inch pvc sbend isi mark, two and half inch pvc s bend isi mark, three inch pvc s bend isi mark, four inch pvc s bend isi mark, six inch pvc s bend isi mark, one and one fourth inch gi pipe b class isi mark, two inch gi pipe b class isi mark, two inch gi bend isi mark, two inch gi elbow isi mark, two inch gi collar isi mark, two inch gm gate valve isi mark, two and half inch gm gate valve isi mark, three inch gm gate valve isi mark, four inch gm gate valve isi mark, two inch pvc bend isi mark, twoandhalfinchpvcbendisimark, two inch pvc pipe isi mark, two and one by two inch pvc pipe isi mark, three inch pvc pipe isi mark, four inch pvc pipe isi mark, six inch pvc pipe isi mark, kal inch pvc pipe isi mark, one and one by four inch pvc pipe isi mark, one and half inch pvc pipe isi mark

Central Government/Public Sector

CTN :45567452

16 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of 1.dome cum reservoir assly.complete (l.h) for fiat bogie with air springs todrg. no. 66704005, col.i, alt. "b" = 2 nos . 2.dome cum reservoir assly.complete (r.h) for fiat bogie with air springs to drg no. 66704011, col.i, alt. "b" = 2 nos. red oxide zinc chromate primer only to be coated to specification is:2074 of thickness 15-20 microns. specialcondition : material specn.no. en10025-5, 2004, s355j2w+n to be used in lieu of en10025/29, s355j2g3 wherever mentioned in detail drawing. items are to be packed in set. packing instruction. 1. dome shall be supplied in coach sets consisting of lh - 2 nos & rh - 2 nos. proper pairing of lh & rh domes shall be ensured. 2. two coach sets of domes (lh - 4 nos & rh - 4 nos) shall be packed in wooden or metal pallet to facilitate safe handling and transportation. 3. dome shall be secureley fastened to the pallets using metal strapping to prevent movement or displacement during transit. 4. each pallet shall be clearly labelled with: item description, manufacturer's name, purchase order(po) number and quantity. 5. the threaded portions shall be adequately protected with suitable protective covers to avoid damage during handling, storage and transportation. 6. the 85mm dia spigot hole shall be covered with plastic or rubber caps to prevent damage, dust ingress and entry of foreign materials. 7. any water remaining inside the domes after hydro testing shall be completely drained before packing to prevent corrossion and contamination during storage and transit. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45550707

13 Jul, 2026 NA

Valsad - Gujarat

Tender For supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as per attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel toe. 1). size range : 6-9 2).type of construction vulcanized rubber upper and sole. 3).last/ sole pattern psv & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recommendation for working environment with high voltage hazards power station operations substation (step-up/ step-down/ distribution) operations electrical hazards with wet condition/ water exposure high current leakage hazardselectrical installations. 6). compliance- astm f2413-18 m i/c eh european standard ce approved ? en iso 20345 : 2011 (sb e fo hro sra) en 50321-1:2018 class 3 ac (for installations with nominal voltage up to 26500v a.c. sb = standard basic protection as per en iso 20345 e= heel energy absorption fo = fuel oil resistant outsole hro = resistant to hot contact sra = slip resistance on ceramic tile with sodium lauryl sulphate csa z195-14 / astm f 2413-18 grade 1 toe protection compression resistance, 11kn 18 kv electric shock resistance (esr) protection. 7). dielectric footwear* astm f1117-03(2013) (min 20,000vac) 8). lining material selected polyester grade lining comes with extra comfort and durability 9). upper construction leak-proof (electrically verified) reinforced rubber upper high visibility with orange and green contrast easy for cleaning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resistant vulcanized rubber outsole good abrasion resistant for extra durability heel energy absorption design to minimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z195 impact and astm f2413 compression tests. 12). chemical resistance sole & upper - good resistant towards acids and alkalis 13). finishing lacquer coating for weather protection. 14). packing recyclable polybag & 6 pairs in a carton. various sizes of electrical safety shoe as per requirement (size 5-11) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45555701

23 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of vestibule bellow complete (lh side) for gangway of lhb type coaches as per icf drg.no. lwsczac-2-5-003, alt-nil with set of bellow securing fasteners to item nos.8,9 &10 (qty-04 set) conforming to assy. drg. no.lwsczac-2-5-002 alt.f. note:a) packing condition: covered in transparent polythene and packed in suitable length wooden case as shown in icf drg.no.icf/sk-2-5-090 to avoid deforming of rubber bellow ring. b) material conforming to rdso spec.no. rdso/2007/cg- 05(rev.1). [ warranty period: 60 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45555805

15 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of hydraulic rail tensor (non-infringing) 70t cap. (spec. no. -tm/sm/32) ( first revision 01 of 2020 ) with latest alteration if any, complete set along with spares 2 sets of hydraulic rubber seals and 2 set (4 nos.) of jaws (rail grip) along with the machine free of cost. these shall be supplied in due packing & with a complete kit of ordinary tools and special tools required by the operator in emergency and for normal working of the machine [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45546360

15 Jul, 2026 NA

Katni - Madhya Pradesh

Tender For supply of set of spares for elgi horn. set comprising of 06 items 06 nos. as per sketch.no. bsl/elw/sk.no.9144. sr.no., description, elgi's part no., qty- set/(in no.) 01.rubber packing "a", 0516340, 01 no., 2.rubber packing "b", 0516350, 01 no., 3.diaphragm seat, 0516310, 01 no., 4.spring, 0516360, 01 no., 5.diaphragm, 0516370, 01 no., 6.rubber packing, 0516380, 01 no., [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45550247

23 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of rubber joint packing for 10mm as per icf drg no.dc/emu-3-5-033, item no.23, , alt.latest [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45557031

23 Jul, 2026 NA

Dibrugarh - Assam

Tender For supply of rubber packing ring for axle box guide arrangement /bg-icf. drawing: icf drg. no. t-0-1-632, alt.-d/7 with latest alteration. spec: as per drawing and irs r-47-72 with latest revision and amendments. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45550742

30 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply of packing for piston (power contactor), drg. no. - kgp/dl/cn-31, alt-3. to dlw description piston seal ?gaco? rubber for ep cont to bhel catalogue no.25801130044p1. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45545645

17 Jul, 2026 NA

Nagpur - Maharashtra

Tender For rubber packing ring, oem phooltas part no.: utvi-03 07/00, make::phooltas, warranty: 09 months from the date of supply. [ warranty period: 9 months after the date of delivery ] ]

Packing Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors