Latest packing tray Tenders | Government packing tray Tenders

Central Government/Public Sector

CTN :45297610

29 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply and installation of partition frames and body shell items for ts/tc (891) coaches to drg. nos. 1. 89110003, alt 'l' - 1 no 2. 89110002, alt 'd' - 1 no 3. aae10812, alt 'nil' - 4 nos. 4. aac10789, alt 'nil' - 60 nos. 5. aac16040, alt 'b' - 13 nos. 6. 72710059, alt 'nil' - 2 nos. 7. 72810019, alt 'e' - 1 no 8. 72810026, alt 'b' - 1 no 9. 72810025, alt 'a' - 1 no 10.72810027, alt 'nil' - 1no 11.aah10645, alt 'a' - 4 nos 12.aah10679, alt 'b' - 2 nos 13.aah10710, alt 'b' - 2 nos special condition : - supply rate and installation rate to be quoted separately. - installation required & annexure a, dtd 13-09-2023 to be followed. - the firms should use only gtaw (or) gmaw welding process for installation works. mmaw is not permitted. 1. body shell items shall be packed in the container as per icf/j&t/sk-1865-alt 'a'. 2. other partition frames not fitting in the container shall be stacked one over the other, secured using packing strip and placed in steel pallet. 3. the height of each stack shall not exceed 750mm for easy handling. 4. suitable and sufficient packingstrips to be used such that stacked items do not disintegrate during transit, storage and handling. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45056657

02 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of under frame arrgt for emu c to drg no.(573)icf/mrvc/c/bt-1-1-001, alt 'k' col 2. firm shall fulfil the manufacturing facility as per icf/md/spec-147, issue status-01 rev.02 with amendment no.02. special condition : the underframe should be supplied as normal side up and side bearer side down. packing condition as per drg no. icf/j&t/misc-2487, alt 'b' stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item ]

Central Government/Public Sector

CTN :45066770

02 Jun, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply of traction transformer for hs-spic with required number of secondary traction windings along with protection equipment, safety varrangement and ht cablewith protection shield including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accessories including auxiliary machines such as oil pump, oil cooling blowers as per clause 4.3 of rdso specification no. rdso/pe/spec/emu/0196-2019 (rev.0) along with mounting hardware (one set per hs-spic)., as per drawing: as per clause 4.3 of rdso specification no. rdso/pe/spec/emu/0196-2019 (rev.0), packing instruction: suitably covered with biodegradable transparent polythene and packed in wooden box.the material used for product packaging shall be eco-friendly .each packing shall be stenciled/labeled handle with care, consignee name, order no,pl's no , description ofitem, batch no, drg/spec no, qty,firm's name, &date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a)nameof the manufacturer b)purchaseorder number c)purchaseorder date d)uniqueserial number (or lot number for bulk items) of the manufacturer or e)dateofmanufacture f)deliverychallan no. g)deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 36 months after the date of delivery ]

Central Government/Public Sector

CTN :45335583

28 May, 2026 NA

Kapurthala - Punjab

Tender For supply of set of high tensile hardwares for fiat bogies (each item in the set to bepacked individually, before final packing all items of set in a box), as per drawing:mplfiaththw version 3, packing instruction: set of high tensile hardwares for fiat bogies:-size-wise hardwares should be packed suitably to avoid thread damage, in bio-degradeable polythene packet, clearly mentioning the nomenclature of hardware. then collectivelly packed in card board box of sufficent strength, further tied with suitable no. of nylon strips. a well protected list should be pasted on box bearing purchase order no, pl no., description, qty, firm's name & address, date of despatch etc. the transit damange if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45335840

01 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of set of high tensile hardwares for fiat bogies (each item in the set to bepacked individually, before final packing all items of set in a box), as per drawing:mplfiaththw1 version 0, packing instruction: set of high tensile hardwares for fiat bogies:- size-wise hardwares should be packed suitably to avoid thread damage, in bio-degradeable polythene packet, clearly mentioning the nomenclature of hardware. then collectivelly packed in card board box of sufficent strength, further tied with suitable no. of nylon strips. a well protected list should be pasted on box bearing purchase order no, pl no., description, qty, firm's name & address, date of despatch etc. the transit damange if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45337212

29 May, 2026 NA

Kapurthala - Punjab

Tender For supply of set of frp side wall panels for lhb chair car for 200 kmph with automatic doors, as per drawing: mplswpljsczac version 11, packing instruction: frp ceiling sheet/side wall panels/frp component self adhesive biodegradable plastic lamination sheet to be provided on each component. projected metallic parts to be protected with plastic/nylon/frpcaps/proper wrapping of biodegradable bubble sheet from all the sides. each component to be packed in biodegradable bubble sheet all around with proper tapping & then to be placed in cardboard box followed by 3 nylon strips tightened from both sides. then collective packs of components to be packed in wooden cage made from wooden strips of size 100x20mm & gap between each strip should not be more than 100mm.on the wooden crate base 3 wooden pegs of size100x100mm (along the length) to be provided for ease in handling with fork lifter. all loose items of a set to be packed separatelyin cardboard box with list of loose items pasted on each box and collective packs of item to be packed in wooden cage made from wooden . roof ceiling (having curved surfaces) in addition to above packing should be stacked on a metallic frames before packing in the wooden boxes. one package should not contain material belonging to more than one coach set & grouping should be preferably of similar sizes. also packing shouldhave indication like 1/4,2/4 etc. ( e.g. four packings will make one coach set) so that onecomplete coach set can be easly identified. the maximum weight of the wooden crate should not be more than 200 kgs. a list should be pasted on each wooden crate showing order no, pl no. description of item,drg no/spec no/set list no. with version, qty, firm's name & address,date of despatch etc. [ warranty period: 84 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45337288

15 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For supply of poh kit for brake cylinder 300 mm dia consisting of four items. (1) wear ring -01 no. to rdsodrg. no. wd-92051-s-14 alt 3, item no.03. (2) piston packing -01 no. to rdso drg. no. wd-92051- s-15 alt nil. (3) leather washer -01 no. to rdso drg. no. wd-92051-s-14 alt 3, item no.11. (4) bush -02 no. to rdsodrg. no. wd-92051-s-14 alt 3, item no.08.material should confirm to str 02-abr-02 with amndt-4. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45338876

22 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of (for vande bharat) stabilizer link for vb ts coaches to gmt drg.no. 65087601, rev- 003 or latest. items are to be manufactured as per ms. ec engineering rubber-metal elements specification no mt18br2 001468-03. special condition: suitable packing to be done to prevent damage during transit, unloadingand rust prevention during storage. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45335727

15 Jun, 2026 NA

Bhavnagar - Gujarat

Tender For supply of union 10 mm assembly consisting of flange, stud, nut and packing items 2, 9, 16 & 23 of dc-emu 3-5-033, alt.s/6. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45313291

01 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of others - scrap miscellaneousellaneousellaneous items ferrous (1)lot no-1802202605, miscellaneousellaneousellaneousscrap line (hand wheeel, operating handle, cbr rod, control rod, angle cock, floor channel, flooting lever, flooting lever pin, striker casting wear plate, gear box, assembly, epr, push rod, short pul rod, mpr, bk shoe key, connector, bg piece safety, bkt packing piece, bk shoe knukle pin, horn check, pu rod cap., nut, bolt, spring etc.),30.00mt,location-near old dry office left side of pathway (2)lot no-1802202606, miscellaneousellaneousellaneousscrap line (hand wheeel, operating handle, cbr rod, control rod, angle cock, floor channel, flooting lever, flooting lever pin, striker casting wear plate, gear box, assembly, epr, push rod, short pul rod, mpr, bk shoe key, connector, bg piece safety, bkt packing piece, bk shoe knukle pin, horn check, pu rod cap., nut, bolt, spring etc.),20.00mt,location- near old dry office right side of pathway

Packing Tray Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors