Latest packing wood Tenders | Government packing wood Tenders

Central Government And Public Sector

CTN :42122124

16 Oct, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For renovation c c and installation of vitrified tiles of size 8feet x 4feet x 15mm with labour and transportation , removal of existing laid floor tiles and dispose the debris with labour and transportation , supply and installation of teak wood flush door of size 900mm x 1900mm near to the pathway with necessary hardware hinges by cutting and plastering the existing brick wall , supply and installation of rest room wpc flush door with frame of size 600mm x 1800mm for rest room with necessary hardwares hinges by cutting and plastering the existing brick wall , construction of restroom wash area of size 10ft x 11ft with antiskid tile vitrified wall tiles ewc washbasin jaguar accessories brickwall with plastering of size 5ftx11ftx9inches width drainage line , construction of upvc wall partition with plastering of size 11ft x 8ft near to the walkway to the toilet with labour and transportation , supply and installation upvc window and 4mm glass frame with labour and transportation , supply and installation of concealed electrical work with cable sockets lan with labour and transportation , supply and painting of royal emulsion paint with smooth putty 1 coat primer 2 coats asian royal emulsion with labour and transportation , supply and provision for pantry arrangements of size 14 x 7ft with granite table top cabinet wash basin with plumbing drainage lines with labour and transportation , supply and installation of teak wood carved outer frame ply with laminates , supply and installation of brass inlayed text on teak frame conference hall

CTN :41844490

06 Oct, 2025 20.00 Lacs

Ujjain - Madhya Pradesh

Tender For supply of tools & equipement of various trades for government iti of ujjain zone - measuring steel tape (5 meters), combination plier insulated (length- 200 mm (8 inch)), screwdriver insulated (size: 150 mm x 4mm), screwdriver insulated (size: 150mm x 6 mm), electrician screwdriver thin stem insulated handle (4mm x 100 mm), heavy duty screwdriver insulated (5mm x 200 mm), punch centre (overall length: 150 mm; tip diameter: 9 mm), knife double bladed electrician (size: 100 mm), neon tester, steel rule graduated both in metric and english unit (overall length: 300 mm), hammer, cross peen with handle (weight: 250 grams), hammer, ball peen with handle (weight: 500 grams), chisel firmer with wooden handle (overall length: 200 mm, blade width: 6 mm), allen key alloy steel, bearing puller (inside and outside) jaw open type, scissors blade, ss, scissors blade, ss (blade length: 150 mm), wire cutter and stripper (overall length: 150 mm), hacksaw frame, adjustable frame (300 mm), try square, blade length: 150 mm, pliers long nose insulated, overall length: 150 mm, pliers flat nose insulated, overall length: 200 mm, pliers round nose insulated, overall length: 100 mm, d.e. metric spanner double ended, gauge, wire imperial stainless steel marked in swg & mm(swg 0 36 and metric equivalents (0.30 mm to 8.23 mm)), file flat 250mm smooth, oil can pressure feed system, capacity: 250 ml, hydrometer, portable electric drill machine with impact driver, out side micrometer (measuring range: 0 25 mm), rheostat (sliding type)(rheostat - 0-25 ohm, 2amp), safety helmet, safety belt, digital multi meter, a.c. voltmeter m.i. analog, portable box type housed in wooden case, ammeter mc analog, portable box type housed in wooden case, ac ammeter mi, analog, portable box type housed in wooden case, kilo wattmeter analog, portable box type housed in wooden case, a.c. energy meter, power factor meter (digital 440v, 20a, 3phase, portable), frequency meter (45 to 55hz), tong tester / clamp meter (0-100a digital type), megger (analog - 500 v), single phase transformer, core type, air cooled 1 kva, phase sequence indicator 3 phase, 415 v, soldering iron (25-wattt), soldering iron (65-watt), soldering iron (120 watt), electric iron, a.c. ceiling fan, motor pump set (1 hp, 1 phase, 240v), ceiling fan coil winding machine, fire extinguisher co2, steel rule with metric & british graduation (length: -150mm), caliper hermaphrodite spring type (length: 150 mm), scriber (length: 150 mm), screw driver (overall length-10mmx150mm), chisel (cold flat 20 mm x 150 mm), hammer (ball pein 0.25 kg with teak wood handle), file -flat (second cut 250 mm), file half round second cut (length: 150 mm), safety goggles (for chipping &grinding), dot punch (dimensions:10mmx100 mm), combination set (300 mm), micrometer (outside 0 - 25 mm lc 0.01 mm), universal vernier caliper-range, vernier height gauge (300 mm graduated in metric lc 0.02 mm nabl accredited lab certificate), surface plate c.i with stand and cover, marking table (mild steel), universal angle plate (150mm x 150 mm), punch number set., drill bit (hss twist 3 to 12 mm by 0.5 mm straight shank), taps and dies complete set-in box (5, 6-, 8-, 10-, & 12-mm set of 5 metric), file (knife edge smooth 150 mm), file (triangular smooth 200 mm), file (square second cut 300 mm), file (triangular second cut 200 mm), file flat second cut safe edge. overall length: 300, file (flat bastard 200 mm), file (flat bastard 250 mm), file (half round second cut 250 mm), file (half round bastard 250 mm), file (round bastard 250 mm), file (hand second cut 150 mm), file card 3" x 5" size brass or steel wire), combination plier insulated ( length- 150 mm), spanner set (tubular box 6-32 mm set of 12 with tommy bar), scraper (flat 150 mm), scraper (triangular 150 mm), chisel (cold flat 10 mm x 100 mm), chisel (cold round nose 9 mm x 100 mm), drill chuck (morse taper 0 - 12 mm), pipe wrench (400mm), pipe vice (cast iron with hardened jaw

CTN :42131867

24 Oct, 2025 NA

Leh Ladakh - Jammu And Kashmir

Tender For supply of dismantling of old worn out false ceiling material with frame structure of xtr hall and other technical area, shifting and disposal of dismantled debris material from outside of office premises , providing, fabrication and fixing of false ceiling in transmitter hall and other technical area at leh, ladakh as per respective drawings , providing and applying of 50mmx50mmx12mm wooden cornice as per approved profile at all around false ceiling in transmitter hall and other technical area at leh, ladakh , dismantling of old worn out wall paneling with frame structure of transmitter hall and other technical area, shifting and disposal of dismantled debris material from outside of office premises , providing, fabrication and fixing of wall paneling treatment in transmitter hall and technical area at leh ladakh as per respective drawings , providing, fabrication and fixing of cedar or teak wooden planks 75 mm x 15 mm in transmitter hall and other technical area at leh ladakh , providing, fabrication and fixing of cedar or teak wooden skirting 125mm x 15mm in transmitter hall and other technical area at leh ladakh , providing, fabrication, fixing and polishing of wooden table for transmitter hall with console table top 25mm thick wooden board or commercial ply with 1mm thick sunmica sheet , providing, fabrication, fixing and polishing of heavy duty wooden workshop table with top made up of 25mm thick wood plank on top and wooden batten frame with wooden beading and moulding , providing and applying of wall finish, putty and pop on walls to make smooth finish for premium emulsion paint at transmitter hall and technical area, after touching on corners etc , providing and applying 2 coats of wall primer and water based luxury emulsion paint on false ceiling and walls surface in xtr hall and technical area, after touching on corners, joints and screw heads , wooden surface to be cleaned and wooden putty to be applied and after rubbing with appropriate sand paper to smooth the surface two or more coat of wooden polish to be applied in wainscot and doors , fixing of 2ftx2ft recessed led light fixtures, as per respective drawings, supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready , fixing of 1ftx1ft recessed led light fixtures, as per respective drawings, supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready dismantling of old worn out false ceiling material with frame structure of transmitter hall & other technical area, shifting & disposal of dismantled debris material from the outside of the office premises., providing, fabrication and fixing of false ceiling in transmitter hall & other technical area at leh (ladakh) as per drawing sg-10150, 10178/4 and respective drawings. description of scope as per measurement taken at site: providing, fabrication and fixing of g.i metal 22 swg channel (size of channel in mm: 15 x 50 x 50 x15) frame structure base channel frame of transmission booth studio, control room, talk studio and other technical area. providing, fabrication and fixing of frame structure with gi metal sheet channel. for hanging arrangement wall to wall 40mm x 40mm x 2mm ms slotted angles with strap hangers shall be provide as per site requirements to support the gi frame structure. these slotted angles shall be further supported 8mm ms tie rods and 10mm ms fasteners from the real ceiling to make the entire structure in level and //bid details 2 / 24

CTN :42081500

20 Oct, 2025 NA

Berhampur - Odisha

Tender For supply of improved iron frame cycle rim charakha - (fitted with chain and crank). , cycle rim iron frame charakha - (fitted with crank only). , (i) brass reed-(pitch bound & chanel reed) -40x52", 44x52", 48 x52", 56"x52", 60x52", 64*x52", 68x52", 72"x52", 76x52", 80x52", 84 "x52", 88 *x52". , i) stainless steel reed -(pitch bound & chanel reed)-40x52", 44x52", 48 x52", 56x52", 60x52", 64*x52", 68x52", 72"x52", 76x52", 80'x52", 84"x52", 88x52". , c.v. heald (2 shaft & 4 shaft) -40x52", 44"x52", 48 x52", 56x52", 60" , x52 up to 88 x52'. , s. s. reed & nylon twin with complete set-40x52" to 88x52". , brass reed & nylon twin with complete set of all counts. , wooden frame loom 52"-56" reed space, 5 wheel take up motion, sal wood frame, slay, slay-race, shuttle box is made up of teak wood. , mini warping drum. , mini warping drum , plastic/ wooden pirn (local & branded). -sizing spray. , nylon heald- count no.-0,1,2,. , throw shuttle (local & branded). , motorized charkha. , bobbin stand for warping machine. natei. p.p pirn with head & without head. -motorized charakha

CTN :42060141

10 Oct, 2025 NA

Pune - Maharashtra

Tender For supply of various type of sign board alkosign board acrylic board and faculty boards d d - customized bilingual insign board with fabricated frame 96 x 48 , customized bilingual insign board with fabricated frame size 96 x 24 , customized faculty board magnetic board teak wood frame with carving l 32 h 48 , marker board alkosign astra crome super writing board size l1200 mm w 900 mm , combination board alkosign size l 4 w 36 , acrylic cover notice board alkosign size 36 48 , acrylic vinyl board size 8 x 18 , acrylic vinyl board size 12 x 15 , 8 mm clear glass with vinyl board crystal polish and installation including 25 mm x 25 mm ss stud qty 2 each size 8 x18 , acp sign board with vinyl letter with installation 18 x 78 , honor board with 8 mm toughen glass with 10 mm vinyl letter size length 30 and height 54 , led sign board with composite panel aluminum framing and installation size l 96 w36 , sh board size l 36 h 72 sh board made by fabricated frame with acp panel and vinyl magnetic board , sh board size l24 h36 sh board made by fabricated frame with acp panel and vinyl magnetic board ) /bid number : gem/2025/b/6621900 * /dated: 26-09-2025 & & / bid document 1 / 16

Central Government/Public Sector

CTN :41876067

06 Oct, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For corrigendum : supply of interior setting up of medical inspection room of cgae port blair at nayagaon e e - fitment of nursing station with fitment of ss sink. , fabrication and installation of medical instrument storage rack of 6x3 feet with inbuilt multiutility drawers. , installation of isolated patient inspection bed with inbuilt iv stand alongwith suitable cooling mattress and three fold hospital partition screen in heat stroke room. , installation of ro water system in heat stroke room integrated with deep ss sink with hot and cold water tap for burn care of patients. , fabrication and installation of dressing table with rebuild drawers for medical utilities of nursing assistant. , fabrication and fitment of cushioned recliner cum seating arrangement with integrated iv fluid administration stand. , installation of sun protection film for temperature control and air purification cum cooling unit for heat stroke room as per scope of work. , installation of patient inspection bed table with iv drip stand alongwith fitment of portable three fold hospital curtain partition screen in emergency ward. , installation and fitment of extension slab working table with overhead wall cabinet for emergency kit in emergency crash ward. , installation and fitment of washing area integrated with deep ss sink with dual tab for hot and cold water dispensing unit and placing of suitable hospital receptacles. , provisioning of movable stretcher bed with inbuilt fulld infusion stand in crash emergency ward. , fabrication and installation of 04 in no. medicine storage rack shelves of 6x2x10 feet with inbuild drawers in dispensary room. , fabrication and fitment of rack and bin system for storage of day to day use medicine and storage of other medical utilities including overhead cabinets. , provisioning and installation of refrigeration unit for stowage of critical medicine and injections with temperature monitoring and controlling facility. , installation of indoor temperature cooling unit with integration of existing electrical infrastructure for preservation and prevention of damage to medicine in dispensary room. , fabrication and fitment of medicine distribution counter cum workstation of 11x1.5x6 feet with fitment of 8mm frosted glass partition for counter management. , fabrication and installation of 6x2x6 ms rack shelve for stowage of medical equipment store with lock and key arrangement. , fabrication and fitment of stowage facility for securing of backup oxygen cylinder including fabrication of shelve and overhead cabinets in store room for storage of hospital linens and necessities. , installation of exhaust system in dispensary room, store room, general ward detention room, crash and emergency ward. , provisioning and installation of sun protection films window blinds with rolling mechanism and fitment of various signage board and wall hangings as per scope of work in mi room building. fabrication and fitment of 2 way frosted glass door with teak wood frame 8x4 feet and fitment of temperature control unit with integration of existing electrial fitments., wall panelling 1110 square feet inside reception area, mo clinic/ inspection room, minor ot room with a grade rubber wood including integration of existing electrical infrastructure and utilities, cladding of area 1054 square feet with suitable high quality louvers / cladding material in various room as per scope of work., fabrication and installation of workstation with cushioned seating arrangement of 03 person as per size in scope of work, fabrication and fitment of rack/ shelve for reception area of size 6x6x1.5 feet including fitment of token generator, fabrication and fitment of aluminium partition 13x13 feet with installation of acp sheet material with integrated door in patient waiting area., installation fitment of 15 person multi cushioned //bid details 2 / 34

Packing Wood Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector