Latest pad clamp Tenders | Government pad clamp Tenders

Central Government / Public Sector

CTN :45335473

12 Jun, 2026 NA

Karimnagar - Telangana

Tender For supply of standard anti wind clamp 2550-2 used for bfb steady arm (identification no 2390)conforming to specification ti/spc/ohe/fittings/0130 with a_c_slip_no_1 and as per rdso drg no.eti/ohe/p/2550-1/2.mod l or latest. make/brand: rdso approved vendors accepted only [ warranty period: 30 months after the date of delivery ] ]

CTN :45326025

02 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no. p.nfa-1.bin no- 1/a & 1 exmp.05.2026-27.02 descroption - scrap alluminium with iron attachment, and other alluminium casting, field coil, lamp caps, alluminium boring etc. our offer: a) scrap alluminium with or without iron attachment. such as- scrap aluminium from main compressor, aluminium socket 4 sqmm, aluminium in line connector, cylinder for tap changer, aluminium number plate, aluminium feeder wire, steady arm, anti wind clamp, aluminium gravity cock, pulley groove, feeder ending clamp, bus bar splice,roller housing for t/c, electro valve support, servo motor, cover for wheel set earthing equipment and other aluminium miscellaneous as in the lot which are kept in bin no-1/a . qty= 2784 kgs. b) scrap alluminium rear & front cover with or without rubber and grease attachment. in bin no- 1 . qty- 1830 kgs. loading will be done by purchaser own arrangement.

State Government

CTN :45249604

29 May, 2026 24.99 Lacs

Raisen - Madhya Pradesh

Tender For rca for procurement of local purchase material required for operations and maintenance of equipmets of 33 11 kv ss under onm circle raisen - isolator pad clamp for raccoon & dog conductor, 33 kv bushing for ptr suitable for 20 mm stud (bimetalic clamp suitable for ptr 20 mm dia brass stud weight 1.450 kg), 11 kv bushing for ptr suitable for 20 mm stud (bimetalic clamp suitable for ptr 20 mm dia brass stud weight 1.450 kg), mog(megnetice oil level indicator model-so-6 150 mm suitable for conservator mounting horizontal alarm switch low oil level, mfm suitable for control panel of all makes, c&r panel indicators, expulsion fuse 20 a for capacitor bank ( for 100 kvar unit), expulsion fuse 40 a for capacitor bank ( for 200 kvar unit), brass stud 20 dia suitable for 33 kv bushing (bimetalic clamp suitable for ptr 20 mm dia brass stud weight 1.450 kg), brass stud 20 dia suitable for 11 kv bushing (bimetalic clamp suitable for ptr 20 mm dia brass stud weight 1.450 kg), winding temperature indicator (wti) , dial 150mm , with capilary, mercury swicth type, oil temperature indicator (oti) , dial 150mm , with capilary, mercury swicth type, tnc switch suitable for control panel of all makes, rubberized cork (gasket) strip size; 80 mmx10 mm, silica gel breather 3 kg casted acrylic plastic body with silica gel, silica gel blue, conical rubber washer for cts (size 12 mm), conical rubber washer for cts (size 16 mm), conical washer (19 mm), trip coil , shunt type 30 volt dc suitable for bhel make vcb specification 30 volt dc, resistance: 4.8 0.1 ohms, outer diameter 42 mm, inner diameter; 16mm (with brass tube) lenth- 93 mm, brass tube length: 98 mm, pluger length: 140 mm, copper wound and varnished with 0.5 meter insulated pvc 1.0 sqmm wire weight, coil: 505 gms, plunger: 126 gms, minimum overall weight of coil:965 gms., trip coil for essun make vcb, trip coil for megawin make vcb specification 30 volt dc, resistance: 4.8 0.1 ohms, outer diameter 42 mm, inner diameter; 16mm (with brass tube) lenth- 93 mm, brass tube length: 98 mm, pluger length: 140 mm, copper wound and varnished with 0.5 meter insulated pvc 1.0 sqmm wire weight, coil: 505 gms, plunger: 126 gms, minimum overall weight of coil:965 gms., auxiliary switch suitable for megawin make 11 kv vcb, auxiliary switch suitable for bhel make 11 kv vcb, bridge rectifier for battery charger., trip coil 30 volt dc suitable for stelmec with assembly, operating voltage: 3.5 0.1 ohm, closing coil with assembly for make stelmec 11kv vcb 30v dc,coil resistance 3.5 0.1 ohm, trip coil suitable for schneider make vcb with assembly 30 v dc,coil resistance 8.7 0.1ohm ,outer diameter 46mm,inner diameter 16mm,height 40mm,copper wound with 0.5meter insulated pvc 1.5sqmm.wire overall min.weight of coil 225gms., trip coil suitable for cgl make 11kv vcb with assembly 30 v dc,coil resistance 2.4 0.1ohm ,outer diameter 51mm,inner diameter 20mm,height 48mm,copper wound with 0.5meter insulated pvc 1.5sqmm.wire overall min.weight of coil 300gms., limit switch motor for 11kv & 33kv cgl vcb, trip coil with plunger for shreem make vcbs 30 v dc,coil resistance 3.9 0.1ohm ,outer diameter 51mm,inner diameter 26mm,height 51mm,copper wound with 0.5meter insulated pvc 1.5sqmm.wire overall min.weight of coil 395gms., 33 kv trip coil suitable for stelmec make vcb, auxiliary switch suitable for stelmec make vcbs, spring charging motor for bhel make vcb 230vac/220 dc/880 watt, 11kv vacuum interrupter suitable for stelmec vcbs model type/wl/34599m3+, spring charging motor suitable for stelmec make vcbs 220ac/dc 150 watts nl -rpm 10, spring charging motor suitable for crompton make vcb 220ac/dc 150 watts nl -rpm 10, trip coil 30 volt dc suitable for cg 33 kv vcb with assembly., big gear suitable for stelmec vcb, small gear for stelmec vcb, 11kv drive rod make magawin, 11kv drive rod make bhel, 11 kv insulating pull rod 11 kv bhel make vcb, single phase 500 watts hand drill machine bid dia size 2mm to 10mm, pg clamp

Central Government/Public Sector

CTN :45246571

26 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap ms mix consist of pantograph parts like lower arm, base frame, upper frame, pushrod, steady tube, balancer, longitudinal tube, push rod, carbon strip, , nut, bolts, chisel bar, chisel rod, chipping machine, clamp bailer, pavement breaker, coupling with rod, hand ratchet, jack rod, pipe cutter, plumb bob, punch rod, punch rivet, spanner, , chainhook, valve wheel, drill rod, hydraulic, valve wheel, drill rod, hydraulic jack, drill rod, plates trolley, cupboard note:- the purchaser should see the lot personally before bidding. no claim will be entertained after the sale of lot location: a by 1

State Government

CTN :45217747

05 Jun, 2026 4.83 Lacs

Korba - Chhattisgarh

Tender For procurement of “2.0 inch ips aluminium tubular bus bar, pad clamp with jumper & terminal- connector for 33kv bus at 400kv switchyard, under ph-ii, 4x210mw units, htps, korba west.

Central Government/Public Sector

CTN :45220344

22 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - 98050126: cond. & u/s. ms/gi scrap consisting of re cut mast, canti lever assembly parts, pipes of sorts and sizes, stay and bracket, tubes,gi bolts of suspension clamp, bolt and nuts, clamp, pulley parts, steady arm and such other similar ms/gi items with/ without porcelain,ceramic insulator and non ferrous attachment as is where is condition. location: b-6 of scrap yard /ssd/ptj.

Central Government/Public Sector

CTN :45176588

02 Jun, 2026 10.11 Lacs

Angul - Odisha

Tender For supply of pad clamp f goab swtch 33kv1200a , pad clamp straight through 33kv1200a , pad clamp f zebra cndctr 33kv 1600a , t connector zebra conductor 650a 33kv , t connector dog dog conductor 33kv 650a , clamp ct cndctr cndctr 33kv zbr al

Central Government / Public Sector

CTN :45146134

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12220gi26b, 98011900, quantity- 28.160 mts. scrap condemned unserviceable gi material, consisting of gi sheets anti creep wire, side arm of atd, large register arm hook, c and w eye rod, double suspension clamp,9 tonne adjuster, gi channel sleeper, arm hook snap pin head, d.p. isolation base channel, l.v.c.b. pole caps, gi sheets, d.p. mechanism, traction mast pole cut pieces, dma cut mast, earthing electrode,9 tonne insulator, pedestal insulator, angles, cantilever assly channels, joists, bfb cut mast, bolts, u bolts, nuts, insulator caps, clamps, tripod antenna, la ring, anti fallen rods, atd l-angle, stay adjuster, bottom attachments, adopters, top attachments, u bolts, stay adjusters, stay sleeves, portal, drop bracket, rt tubes, bkt tubes, drop clips, isolator base, c clamps, steady arms, support angles, mast guy rod fitting, drop brackets, compensating plates, v bolts, bottom plates, super mast, bolts , compensating angles, optical fiber cable cut mast, insulators, gi u bonds, screw rods, pipes, stands, towers, buckets, pots, doper clip, snap paid pin, couplings, insulator bluff rod caps, covers and other ohe equipment of sorts and sizes, broken or unbroken, with or without insulation and with or without attachments of ms. location: bin no: 220, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note: - delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

Central Government/Public Sector

CTN :45134598

18 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap ms mix consist of pantograph parts like lower arm, base frame, upper frame, pushrod, steady tube, balancer, longitudinal tube, push rod, carbon strip, , chisel bar, chisel rod, chipping machine, clamp bailer, pavement breaker, coupling with rod, hand ratchet, jack rod, pipe cutter, plumb bob, punch rod, punch rivet, spanner, , chainhook, valve wheel, drill rod, hydraulic, valve wheel, drill rod, hydraulic jack, drill rod, plates trolley, cupboard note:- the purchaser should see the lot personally before bidding. no claim will be entertained after the sale of lot location:c by1, near office

State Government

CTN :44083486

19 May, 2026 NA

Multi City - Telangana

Tender For corrigendum : procurement of aluminum alloy pad clamps, pg clamps and t-clamps suitable for zebra and moose acsr conductor at pjhes, revulapally

Pad Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors