Latest pad lock Tenders | Government pad lock Tenders

Central Government And Public Sector

CTN :42123508

21 Oct, 2025 46.28 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of material and complete items of works for under the work of special repair to conservation and restoration of collapsed boundary walls of tomb of diwan saiyed mohammad khan majhera muzaffarnagar - items to be executed, u/s lime, surkhi, coarse sand, brick aggregate 20 mm-25 mm, belgiri, gum, gur, mud, modern bricks 2nd class, kail wood sleeper (3.05x 2.05x0.10 m), r.r. stone, c.r. stone, careful dismantling of roof in random rubble masonry over bhurji in lime concrete, executed manually to preserve adjacent architectural features and reusable stone material. the work shall be carried out under direction of engineer in- charge, ensuring minimal vibration and no damage to adjoining historic fabric., earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed,, providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working for the required duration as approved and removing it there after. the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin- charge. the elevational area of the scaffolding shall be measured for payment purpose. the payment will be made once irrespective of duration of scaffolding., surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift, layer by ramming and watering, lead up to 50 and for all

Central Government / Public Sector

CTN :42119871

16 Oct, 2025 NA

Rampur-Up - Uttar Pradesh

Tender For supply of mechanical spares at pattikalan lpg bp c c - steel , sprocket 16 teeth, 65mm, cs, cast steel , shaft, dia 40, en 11, 40x355 key 25x6 , shaft, dia 40, en 11, 40x406 key 25x6 , shaft, dia 65, en 11, as per plant specification , lot adaptor brass , self closing sc adaptor brass , pin broken adapter with nrv , uhmw teflon strip for conveyer t 10mm w 40mm , tyre 3.50.08 , tube 3.50.08 , counter weights landr set , 18mm end bore , wt 24 2x400 diffuse sensor sick , wl24 2x430 reflective sensor sick , sensor cable 5 metre , crocodile clip for tld bay , gear box fan 35 mm bore snu 5 sr. no. 285693 , gear box fan 38 mm bore snu 6 sr. no. 285992 , gear box fan 40 mm bore snu 7 sr. no. 631886 , gear box fan cover sr. no. 285693 , gear box fan cover sr. no. 285992 , gear box fan cover sr. no. 631886 , gear box oil seal snu 5 sr. no. 285693 , gear box oil seal snu 6 sr. no. 285992 , gear box oil seal snu 7 sr. no. 631886 , fastner 10x100 , fastner 16x150 , allen bolt 6x20 ht, alloy steel , allen bolt 8x25mm ht, alloy steel , allen bolt 10x25mm ht, alloy steel , allen counter bolt 8 mmx12 mm , alloy steel , ms bolt 8x75 , ms bolt 10 mmx45 mm , ms bolt 12 mmx45 mm , ss lock nut 6mm , ss lock nut 8mm , ss lock nut 10mm , ss lock nut 12mm , lock nut 16x40mm with washer , pressure gauge 0 7 x 4 inch , pressure gauge 0 16 x 4 inch , pressure gauge 0 21 x 4 inch , pressure gauge 0 42 x 4 inch , pressure gauge 0 70 x 4 inch , pressure gauge 0 140 x 4 inch , pressure gauge 0 16 x 6 inch , pressure gauge 0 28 x 6 inch , pressure gauge 0 35 x 6 inch , temperature gauge 0 100 x 4 inch , ms c channel 100x50x6mm 6mtrs , ms c channel 75x40x6mm , gi sheet 4ft width ,22 gauge , ms iron sheet 8inch by 4 inch , ms strip 40 x 6mm 6 mtrs , ms strip 25x5mm , ms strip 20x5mm , gi earthing strip 50x6 , ms angle for conveyor 40mm x 40mmx6mm , ms angle for conveyor 50mm x 50mmx6mm , ball valve 0.5 inch class 800 sw , ball valve 0.75 inch class 800 sw , ball valve 1 inch class 800 sw , nrv 1 inch, class 800, sw , nrv 0.5 inch, class 800, sw , gate valve 3 inch, class 150, flanged , nrv 3 inch, class 150, flanged , metallic gasket 0.5 inch class 300 , metallic gasket 0.75 inch class 300 , metallic gasket 1 inch class 300 , metallic gasket 2 inch class 300 , metallic gasket 2.5 inch class 300 , metallic gasket 3 inch class 300 , metallic gasket 4 inch class 300 , metallic gasket 6 inch class 300 , metallic gasket 8 inch class 300 , thermal safety valve tsv 0.75 inch , welding rod bundle of 5 packets of grade e6013 8mm , cutting wheel 5 inch , cutting wheel 4 inch , cutting wheel 14 inch , grinding wheel 4 inch , hydraulic motor 105 1141 006 , anti static rubber mat 2000x1000x25 , straight stopper without piston , double stopper without piston , lead seal for 47.5 kg , lead wire for 47.5 kg , lot valve washer , lot valve o ring , safety cap for 47.5 kg lot , nylon thread for safety cap 310 mm , ss clips for safety cap , belt 255l, conti hi tech , antistatic v belt spb 2360 , antistatic v belt spc 4350 , antistatic v belt spc 4550 , bearing 30210 , bearing 6406

CTN :42144733

13 Oct, 2025 NA

Alwar - Rajasthan

Tender For supply of chapati maker , bubble roll , pad lock 50 mm , pad lock big , media converter 20 km

CTN :42119706

11 Oct, 2025 NA

Udhampur - Jammu And Kashmir

Tender For supply of cloth dryer , water pump , 200 liter plastic drum , water pipe 1 inch , motor fitting assy , meat cutter ss , omelette spoon , rice palta , ink blue , v5 pilot pen in refill , rubber stamp , white drawing sheet , scale 2 ft , permanent marker black , permanent marker blue , add gel pen black , insulation tape , tiffin box , kamei electric trimmer , moser trimmer , apron , shower spray bottle , powder puff , scissor large , scissor medium , hair brush , powder , comb , ustra , towel , umbrella , helmet , ammunition register , receipt voucher control register , demand progress register , file cover printed , printed register cover , butt register , rtc register , talc sheet , binder clip small , binder clip medium , binder clip large , compact disc rw , digital versatile disc rw , register 200 pages , register 300 pages , pad lock , curtains pipe 12 feet , bracket , funnel

CTN :42142587

14 Oct, 2025 NA

Rajauri - Jammu And Kashmir

Tender For supply of mat door 910x550mm , laundry press commercial tailor , scabard dah mk iii , dah mk iii , knife cook 230mm steel , uc 150ms degchie 650mm , potato peeler manual ss , uc 150 ms tawah mk 2 , bucket plastic 13 ltr , flask thermos 0 point 5 ltrs with plastic cap , pad lock ig 4 levers 75mm , pilers side cutting 200mm

CTN :42141029

23 Oct, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of basin wash aluminium , axes single bit felling head 2 kg , shirts cotton white for cooks size 1 , vices bench 75 mm without quick release , axes hand 1 kg , beaters fire mk3 , bars crow bar chisel and claw ends mmx380 , pliers side cutting 200 mm , pad lock ig4 lever 40 mm , stainless steel thermos 1 ltr , tub iron galvanised 85 ltr , stainless steel hamam dasta , pad lock ig4 lever 50 mm , phawrah complete , lantern hurricane tinned size 2 , knife veg ss 200 mm long blade 8 inch , rat trap cage type , scissors barber 175mm , apron cook , clock wall batter operating quartz , comb hair barber no 1 , comb hair barber no 2 , strap razor , cases tool barbers , brushes hair mk3 , sprayer hand anti insects

CTN :42125782

11 Oct, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of regulator assy rh , deleted brake system , tank coolant vehicular , tie rod end steering , gasket intake manifold , air compressor repair kit , cover air compressor , reverse light switch , door lock assy rh , clutch master cylinder 19 05 dia , ram hydraulic ram assy , regulator thermostatic temperature , bty cut off switch , input helical gear , sealing kit comp , fuse box , remover bearing and bushing

CTN :42119295

22 Oct, 2025 NA

Nagpur - Maharashtra

Tender For supply of throttle valve z2fs6-2-4x/2qv, make: -rexroth or its one to one base fitment equivalent make meeting , hydraulic lock z2s6a1-6x, make: -rexroth or its one to one base fittment equivalent meeting function , pressure relief valve zdb 10 vp2-4 x /200v make rexroth or its one to one base fittment equivalent , hyd d. c. valve 4we 6 e 6x/e w 230-n9kr of rexroth make or its one to one base fittment equivalent mak , in line check valve s20 a1.0 make rexroth or its one to one base fitment equivalent make meeting fun , directional control valve 4we6 j6x/ew230n9k4. make rexroth, or its one to one base fittment equivale , directional control valve 4we6 d6x/ew230n9k4. make: rexroth or its one to one base fitment equivalent

CTN :42125414

11 Oct, 2025 NA

Sonipat - Haryana

Tender For supply of pad lock various (as per defence specification) (q3)

CTN :41820363

07 Oct, 2025 NA

Sealdah - West Bengal

Tender For corrigendum : supply of mechanical cum hydraulic jack screw lifting and traversing capacity 50 ton. hydraulic special purpose screwed ram integral jack with safety lock nut. one no. hydraulic jack consisting of following (a) 01 no. hydraulic jack integral pump with screwed ram & safety lock nut mounted on traversing base-type- sp-sr-50/400+vtb capacity-50 tonnes closed height without vtb-575mm closed hight with vtb-720mm hydraulic lift-400mm total extd. hight without vtb 975mm total extd. hight with vtb 1120mm ram dia-100 mm body dia-198mm base size 240x300mm tested on 20% overload (b)01 no. traversing base type vtb-50/145/300 capacity 50 tonnes hight 145mm trvel 300mm. make: vankos, hy-tech, pascal hydraulics. accepted make: vankos or similar. [ warranty period: 30 months after the date of delivery ]

Pad Lock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government / Public Sector