Get complete information related to latest Paddy Husker Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Paddy Husker Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Paddy Husker Tenders.
Tender For corrigendum : contract for supply of cane cutting knives - csm ajnala, make: zuper/imco/tfipl cane cutter knives as per drawing no. acsm 61 for cutter length 465 mm, make: zuper/imco/tfipl tips for cane cutter/cane chopper knives. size 8" x 25 mm approximate weight 1.52 kg, csm batala, make: zuper/imco/tfipl hardened up to 45-48 hrc double edge cane cutting knives duly hard faced to be done by n6006 moc: is-2062e 250 br size:- 25x525x160 mm as per drawing no. m126_0266e, csm bhogpur, make:- imco/tfipl cane cutting knives duly forged & tempered made from shock resistance ms plate 25mm thick confirming to is - 2062. hardness 56-58 hrc/550 bhn, tensile strength - 65kg/mm, yield strength 50 kgf/mm elongation 20 % min with proper heat treatment to avoid breaking the knives as per drawing no. mh-0303-r2 with hard facing., make:- imco/tfipl cane cutting knives dully forged & tempered made from shock resistance ms plate 25mm thick confirming to is-2062. hardness-56-58 hrc/550 bhn, tensile strenght-65 kg/mm, yield strength 50 kgf/mm elongation 20 % min with proper heat treatment to avoid breaking the knives as per drawing no. mh-0303-r3 with hard facing., csm budhewal, make:- zuper/imco/tfipl cane cutting knives for cane cutter as per drawing no. ce/87-12 (duly hard faced) made from 25 mm thick ms plate grade is-2062 make sail, csm fazilka, make:- zuper/imco/tfipl cane cutting knives without hard facing as per drawing no. 310r, csm gurdaspur, make:- zuper/imco/tfipl chopper knives material - is: 2062 e250 br, tip will be both side hardened upto 45-48 hrc as per is 8461 drawing no. m125-m0255a both side hard facing to be done by n6006 electrode, make:- zuper/imco/tfipl cane leveller knives material- is: 2062 e250 br, tip will be both side hardened upto 45-48 hrc as per is 8461 drawing no. m125-m0256a both side hard facing to be done by n6006 electrode, csm morinda, make zuper/imco swing knife type cane cutter knives with domite tips as per our existing size and design, csm nawanshahr, make:- zuper/imco/tfipl cane cutting knives as per drawing no. m-350 with hard facing, csm nakodar, make: zuper/imco/tfipl cane cutting knives (machine finished) without hard facing as per drawing no. sm89-336-3m, make: zuper/imco/tfipl cane cutting knives (machine finished) without hard facing as per drawing no. sm89-337-3m
Tender For supply of coil 5 ohm , resistance coil 10 ohm , reversing key , sonometer with weight , spherometer 1 mm pitch , viscosity apparatus , youngs modulus , vernier callipers ime type , metallic sphere with hook , zener diode characteristics apparatus , pn junction diode chartersics apparatus , transistor characterstics apparatus pnp and npn , study of logic gate apparatus , friction board apparatus , thermometer 220 f , fraction weight box , plier taparia , screw driver set multipurpose , transformer step up and step down , led 2 watt , inclined plane , milli ammeter , milli voltmeter , ohms law apparatus , retort stand with clamp and bose head , helical sprinf slinky , split cork , travelling microscope , spirit level small , overflow cane , one way key , two way key , four way key , jockey , constantan wire , magnesium wire , watch glass 3 inch , watch glass 2 inch , hanger with weight 50 gm , newton colour disc , spirit lamp , tornedo working model , archmedies principle working model , hand generator working model , solenoid engine working model , electric mlotor working model , magnetic induction working model , domestic circuit parallel working model , domestic circuit series working model , battery eliminator 2 amp , magnetic compass medium size , wire cutter stripper cutter , dry cell charger , rehostat 50 ohm , rehostat 100 ohm , telescope , battery 6 volt , 9 volt dry cell , battery 12 volt , galvanometer , voltmeter , ammeter , dc copper connection wire roll insulated , nicrome wire , simple torch , laser torch red , laser torch green , laboratory stop watch 60 sec timer , white screen for image formation , plane mirror mounted on wooden block 10 x 15 cm , compass magnet small , iron filling , thread roll , geomerical instrument box , paper pin box , thumb pin box , lens cleaner fluid , multimeter digital , ebonite rod , glass rod 20 to 25 cm , test tube , test tube stand , solar system model , soldering iron , solder flux , soder wire resin 100gm , paper tape , plain stickers or label pkt , electric apparatus chart , prism refraction chart , eye defect and correction chart , inertia of 3d body , reflection of convex mirror on different position , reflection of concave mirror on different position , human eye chart , symbols of components used in circuit diagram , flaming left and right hand rule , sound wave refraction and compression , carbon resistance band reading chart , dry cell part chart , solar system chart , albert einstein portrait , prafulla chandra roy portrait , chandrasekhara venkata raman portrait , homi jehangir bhabha portrait , jagadish chandra bose portrait , dr apj abdul kalam portrait , sir issac newton portrait , ammonium chloride 500 gm chemical , copper sulphate 500 gm chemical , zinc sulphate 500 gm chemical , zinc rod , spirit solution for spirit lamp 1 ltr , first aid kit , sitting stools , cupboard or almirah shelf , lab open rack
Tender For supply of pen pilot blue , pen red gel , refill gel pen , pen normal blue , pen normal black , correcting pen , pencil natraj , high lighter , permanent marker pen black , white board marker , poker steel , paper one hole , file flapper , transparent poly plastic bag , cd r , note pad estate manager , note pad normal , stapler , tag big nylon , paper ream , file folder cover , flag chit , fevi quick , fevi col tube , register , scissor medium , scissor small , duracell remote cell , duracell wall clock cell , stamp pad blue , stamp pad red , eraser , sharpner , scale stainless steel , crocodile clip , transparent tap , paper cutter small , paper cutter big , calculator , harpic super , dettol soap , dettol liquid soap , duster small cotton , pocha big , duster yellow , naphthalene ball , room freshner , phool jharu , washing powder , vim bar soap , phinyle cane , phinyle bottle , collin , toilet cleaner brush
Tender For corrigendum : supply of vaccum pump , pressure gauge , tube cutter , brazing rod , brazing torch , flammable gas , flaring tool , swagging tool , fin comb , calmp meter , pinch plier , non return valve , compressor , allen key set , tube bender , cane tape valve , car ac charging adapter , hand tool bag
Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory