Get complete information related to latest Paddy Transplanter Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Paddy Transplanter Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Paddy Transplanter Tenders.
Tender For supplying of materials and supplying and spreading of materials at various places of vapi municipal area. annual rate 2026-2027 - supplying of yellow earth, garden soil at site as directed., supplying of hard murram at site as directed., supplying of coarse clean sharp sand at site as directed., supplying of crushed stone aggregates, chippings etc. of disintegrated pieces, eletatrious and organic matter (for bitumen surface dressing etc.) and grading as per i.r.c.code., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii) 40 mm to 90 mm size metal, (iv)9 thick rubble, supplying bricks., supplying of granular sub base by providing coarse graded material, mixing by mix in place method with rotavator at omc, with grading material of 53 mm to 26.5 mm size @35 percent,26.5mm to 4.75 mm @ 45 percent and 2.36mm below @ 20 percent at site as directed., providing wet mix base course maximum 200 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, including cost of materials labour plant and equipment etc complete, construction of granular sub-base by providing coarse graded material(metal), spreading in uniform layer on prepared surface mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, etc, complete as directed by engineer in charge., providing and laying wet mix base course maximum 150 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, spreading into grade and camber with mechanical paver and consolidation with vibratory road roller including cost of material labour plant and equipment etc complete as directed by engineer in charge., supplying and spreading of following materials at site as directed by engineer in charge including rolling and consolidation with vibratory roller as directed by enigineer in charge., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii)40 mm to 90 mm size metal, (iv)9 thick rubble, supplying and spreading hard murram including rolling and consolidation with vibratory roller as directed by enigineer in charge., note:- all rate are required compulsory
Tender For renovation and replacement of damaged and worn out spare parts with new ones for sludge pump-1 with ancillary works at wtp-iv, garden reach water works.- manufacturing, supply & delivery of pump - shaft made off ss-316 for 647 cum/hr., 15 mtrs head sludge , pump with necessary keys etc, as per sample at garden reach water treatment plant., , manufacturing, supply & delivery of shaft -sleeve, , made of ss-316 for 647 cum/hr., 15 mtrs head sludge, , pump as per sample at garden reach water, , manufacturing, supply &delivery of casing ring made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufacturing, supply &delivery of split gland made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufactering, supply delivery of baaring housing made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply delivery of lock nut of impeller made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply & delivery of lock nut of bearing made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , balancing of rotating assembly of 647 cum/hr., 15 mtrs head sludge pump including loading, unloading and transportation from and to at garden reach water treatment plant, , total rotating assembly & keep it at a suotable place after opening the top cover of pump unit. dismantling the bearing housing at both end & as per direction of eic., , manufacturing, supply & delivery of impeller made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing.. supply delivery of bearing housing cover (d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing, supply &delivery of bearing housing cover (n.d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at tp-1, grww. garden reach water treatment plant, , manufacturing, supply &delivery of supporting foot made of nici for 647 m?/hr., 15 mt head sludge pump as per sample at garden reach water treatment plant., , m.s plate as per is: 2062-2011/latest revision, make: sailitataijindal (b) above 2 mm upto 10 mm thickness, , fabricating m.s. specials of different diameter in shop out of 8 mm to 12 mm thick m.s plates supplied depart-mentally, cutting the plates to exact size & shape by gas cutting device and/or by adopting any other approved type of mechanical means, bending the same in true curvature by template and rolling machine of approved design including proper marking, levelling joints followed by electric arc welding - longitudinal and circumferential, as necessary, using standard electrodes as per i.s.specification including edge preparation, electricity charges and hydraulic testing of the fabricatedpiece all complete as per specification and direction of the engineer-in-charge. [the engineer-in-charge shall approve the electrodes for are welding before use. fabrication of m.s. flange to form m.s flanged tail piece shall not be considered as m.s. special], , cutting to requisite length or shape departmental r.s. joists, channels, angles, tees, plates etc. (payment to be made on area of cut surface), , welding in m.s. structural work with gas or electric: (a) tack weld, , welding in m.s. structural work with gas or electric: (b) continuous weld., , supply of m.s. flange (slipper type) as per is-6392 table 17 thickness 12mm nb diameter in mm 350, , flange joint to c.i./d.i/ms. pipes and specials including supply of rubber gasket, nuts, bolts, washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the engineer-in-charge. di
Tender For supply of pvc insulated aluminium cable single core and multi core circular sheathed with rigid conductor isi marked to is 694 (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , pvc insulated copper cable single core and multi core circular sheathed with flexible conductor (v2) isi marked to is 694 (q2) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , moulded case circuit breakers (mccb) conforming to is/iec 60947 (part 2) (q2) , cp pillar cock brass 15 mm , cp long body bib tap 15 mm , bathroom looking mirror 600 mm by 450 mm , cp bib tap cp 15 mm dia , cp bathroom water shower 125 mm dia , kitchen shelving plate rack 24 by 24 by 10 , curtain rod decorative type 25 mm dia , cp swan neck movable taps for sink wall mounted , health faucet with hook 1 point 5 mtr , cp bib tap 15 mm 2 in 1 , cp 2 in 1 angle valve 15 mm , pvc water tank cover lid 500 oblique1000 ltr , cp angle valve 15 mm , cp towel rail 450 mm , ewc seat cover plastic , cp soap dish , helical door spring , wall mixer 3 in 1 with hand shower , wire mesh galvanised steel , wash hand basin 550 mm by 400 mm , cp grating 100 mm with hole , cp stop cock 15 mm external thread , cp waste coupling 32 mm , ewc with s trap , door handle aluminium 125 mm , toilet paper holder , pvc bib tap 15 mm , sliding door bolt ss 150 mm long , ptmt pillar cock 15 mm , ptmt bib tap 15 mm , plain glass 1199 by 900 by 3 mm , curtain bracket 25 mm , glass pane frosted 3 mm thick of size 4 feet by 3 feet , kitchen sink coupling 4 inch , door handle aluminium 150 mm , float valve brass 20 mm , pvc waste pipe 32 mm , tower bolt aluminium 150 mm , glass oil putty , door stopper 200 mm long , gate valve 15 mm brass , cp stop cock 15 mm enternal thread , tower bolt ms 200 mm long , jet spray for e type wc , cp urinal spreader male 15 mm dia , cp 15 mm turbo washing machine cock , ss connection pipe 600 mm long , sink cock with cp flange with aerator spout faucet , led flood light 300 watts , led street light 70 oblique 72 watts , led lamp 11 oblique 12 watts , led flood light 350 watts , led flood light 150 watts , led street light 25 watts , mcb tpn 63 amp , led street light 30 watts , led flood light 240 oblique 250 watts , led flood light 120 watts , led lamp 9 oblique 10 watts , cable aluminum armoured xlpe pvc insulated 2 core into 10 sqmm , led garden light 25 watts , cable aluminum armoured xlpe pvc insulated 3 point 5 core into 35 sqmm , led lamp 7 watts , led lamp 5 watts , bollard light 9 w , mcb sp 16 amps , mcb spn 63 a , mccb 630 a 50 ka 3 p , mccb 100 a 35 ka tpn , led post top lantern 30 watts , cable almunium 2 core into 10 sqmm , led flood light 50 watt //bid details 2 / 67
Tender For removal of heavy blockage and desilting of sewer/sewer line by super sucker machine in vishnu garden, khyala, chaukhandi and chand nagar in rajouri garden ac-27 under ee(c)-19.
Tender For supply, testing, commissioning alongwith comprehensive operation andmaintenance contract for 5 (five) years of truck mounted tree transplanter(replanter) machine 01 no. for garden department as per annual maintenance contract tenderspecifications, scope of work & terms conditions.