Latest painting equipment Tenders | Government painting equipment Tenders

CTN :45722224

09 Jul, 2026 NA

Bhandara - Maharashtra

Tender For supply of spares of gas chromatography gc 2979 (analytical) - potentiometer for gc fid injection, gc gas tight syringe (20ml), gas linear for injector, graphite's for capillary column (1 pkt-5 nos.)

CTN :45683029

10 Jul, 2026 NA

Delhi - Delhi

Tender For supply of gas tight syringe of 1 ml capacity part no : 008102 1mdf-gt, 1ml syringe make: sge]

Central Government/Public Sector

CTN :45546948

02 Jul, 2026 NA

Mysore - Karnataka

Tender For corrigendum : supply of high pressure hose suitable for application of high viscous paints such as p u paints, high build epoxy paints, fluoropolymer (fluoroethylene) paints, enamel paints, primer paints, etc. material type: core polyamide reinforced cover polyurethane blue colour suitable for application of heavy duty airless spray painting equipment having 420 bar to 480 bar pressure. for chemical resistance to solvents and aggressivefluid along with suitable connector as per annexure-i in the make: - vr coatings or tiger or graco or kremlin or jaguar or pilot or wagner only.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45263804

01 Jul, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

Central Government/Public Sector

CTN :45604805

26 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of self-adhesive masking tape 25mm width x 30 meters length backed by special grade of crepe paper & coated with rubber thermoset adhesive with following qualities. 1) the thickness of the crepe paper tape should be 0.145 mm+/- 10% tolerance. 2) it shall peel off easily from the roll and not tear while doing so and at the same time, it shall be capable of being cut-off easily to the required length. 3) it shall hold the 80 gsm kraft masking paper of 700mm width in vertical position over the coach till it is removed from the surface. 4) adhesion property of the tape over bare metal, tape to tape and paper to tape shall be good enough to hold the paper during the spray painting operations. 5) during application of painting, it shall not allow the paint to penetrate through it to the substrate. 6) while removing the tape after drying, the tape shall not peel off the paint or leave any stain over the painted surface. 7) should hold the masking paper in place whilepaint applications inside the painting booth where automated spray painting operations are carried out using high pressurespray painting equipment. note: 1) the product shelf life should be 12months from the date of manufacture special condition 2) ten numbers shall be supplied as sample for conducting suitability tests. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45453454

30 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply, installation & commission of heavy duty airless spray painting equipment type rhino 70.150 or similar, suitable for marine paint application, high build epoxy paints, mio, zinc silicate, p.u. paints etc. consisting of the following items as mentioned in annexure-i and one set of maintenance spares required for pump rhino 70.150 or similar as mentioned in annexure-ii in the make: - vr coatings or tiger or graco or kremlin or jaguar or pilot or equivalent as per technical specification annexure-i and annexure-ii. [ warranty period: 30 months after the date of delivery ] ]

CTN :45454090

30 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply, installation & commission of heavy duty airless spray painting equipment type rhino 70.150 or similar, suitable for marine paint application, high build epoxy paints, mio, zinc silicate, p.u. paints etc. consisting of the following items as mentioned in annexure-i and one set of maintenance spares required for pump rhino 70.150 or similar as mentioned in annexure-ii in the make: - vr coatings or tiger or graco or kremlin or jaguar or pilot or equivalent as per technical specification annexure-i and annexure-ii. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45184191

15 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of self-adhesive masking tape 25mm width x 30 meters length backed by special grade of crepe paper & coated with rubber thermoset adhesive with following qualities. 1) the thickness of the crepe paper tape should be 0.145 mm+/- 10% tolerance. 2) it shall peel off easily from the roll and not tear while doing so and at the same time, it shall be capable of being cut-off easily to the required length. 3) it shall hold the 80 gsm kraft masking paper of 700mm width in vertical position over the coach till it is removed from the surface. 4) adhesion property of the tape over bare metal, tape to tape and paper to tape shall be good enough to hold the paper during the spray painting operations. 5) during application of painting, it shall not allow the paint to penetrate through it to the substrate. 6) while removing the tape after drying, the tape shall not peel off the paint or leave any stain over the painted surface. 7) should hold the masking paper in place whilepaint applications inside the painting booth where automated spray painting operations are carried out using high pressurespray painting equipment. note: 1) the product shelf life should be 12months from the date of manufacture special condition 2) ten numbers shall be supplied as sample for conducting suitability tests. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :44801036

16 Apr, 2026 NA

Delhi - Delhi

Tender For supply of one set consisting of following 09 items of spares for dissolved gas analyzer (dga), model cs-6100 make-centurion scientific, new delhi 1. calibration standard gas mixture in 0.5 ltr water cap. canister suitable for dga analysis (part no. cs016013) = 01no. 2. gas tight syringe of 1 ml capacity for sample injection (part no. cs016006) = 02nos. 3. glass syringe, 5ml (part no. cs016005) = 04nos. 4. septum for dga (pkt of 50 nos) = 02pkts. 5. end cap for valve of extraction syringe (part no. cs016003) (packet of 25 nos.) = 04nos. 6. plunger head seal for 60 ml (part no. cs016002) = 05nos. 7. septum ? calibration gas canister (pkt of 50 nos) (part no. cs016015) = 01no. 8. 10ml syringe for trapped air extraction= 05nos. 9. 3 way valve for extraction of gases (cs016001) = 04nos. [ warranty period: 30 months after the date of delivery ]

CTN :44751584

07 Apr, 2026 NA

Mysore - Karnataka

Tender For supply of painting equipment s and other consumable items at bnpm premises, mysore. heavy duty burnishing polishing machine with , non-woven for metal, wood, rust removing , electric surface polisher with accessories , angle grinding machine , handheld pneumatic belt sander , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 320, fine) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 220, fine) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 36, rough) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 60, rough) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 80, medium) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 120, medium) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 400, very fine) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 600, very fine) , wire tar brush set for drill 5 pcs brass steel , rotary brush wheels cup brush, wheel brush, end b , non-woven 6 x 2 inch (150mm x 50mm) abrasive flap wheel , non woven spindle mop wheel 50x50x6mm with 6 mm shaft 5pcs , non woven spindle mop wheel 50x25x6mm with 6 mm shaft 5pcs , non woven spindle mop wheel 25x25x6mm with , 6 mm shaft 5pcs , dry wall sander

Painting Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector