Latest painting items Tenders | Government painting items Tenders

CTN :45688402

07 Jul, 2026 NA

Ambala - Haryana

Tender For supply of painting items -industrial paint ,aluminium paint with medium ,anti-sulphuric off white paint ,z.c redoxide primer ,thinner ,black paint ,bus green paint ,firozi blue paint ,golden yellow paint ,p.o. red paint ,smoke grey paint ,ultra white paint ,primer zinc chromate red oxide ,paiting brush ,wire brush (with wooden handle) ,painting brush 1 ,painting brush 2 ,painting brush 3 ,painting brush 4 ,painting brush 5

CTN :45407521

26 Jun, 2026 NA

Siang - Arunachal Pradesh

Tender For bid to ras supply of hard ware and carpenter items of buildings 44 brtf as appx a in specification document , electrical items of buildings 44 brtf as appx b in specification document , electrical items for generator room and electrical distribution system 92 rcc as appx c in specification document , plumbing and sanitary items of buildings 44 brtf as appx d in specification document , painting items of buildings 44 brtf as appx e in specification document , hard ware and carpenter items of buildings dett pandu 1342 transit camp as appx f in specification document , electrical items of buildings dett pandu 1342 transit camp as appx g in specification document , painting items of buildings dett pandu 1342 transit camp as appx h in specification document , other misc items of buildings dett pandu 1342 transit camp as appx j in specification document

CTN :45459805

15 Jun, 2026 NA

Bhaderwah - Jammu And Kashmir

Tender For fixing of rates for supply of workshop material for the fy 2026 27 - super enamel aluminium wire (13 to 22 swg) with scrap , super enamel aluminium wire (13 to 22 swg) with out scrap, , dpc aluminium wire (13 to 22 swg) with scrap, , dpc aluminium wire (13 to 22 swg) with out scrap, , super enamel copper wire (13 to22 swg) with scrap, , super enamel copper wire (13 to22 swg) with out scrap, , dpc copper wire (13 to 22 swg) with scrap, , dpc copper wire (13 to 22 swg) with out scrap, , lt bush rods (m-12), , lt bush rods (m-20), , lt bush rods (m-30), , ht bush rods, , lv bushing (12 mm), , lv bushing (20mm), , lv bushing (32/30 mm), , ht bushing, , butter paper (2 to 3 mil), , lethroide paper (2 to 6 mm), , press boards (5 to 10 mm), , gutties, , rubber washers of sizes, , ltiht washers, , cork sheet (3,5 & 8 mm), , bakelite tubes, , cotton tape, , bovin tape, , insulating varnish, , m.seal, , fevicol, , glass sleeves, , packing sheet, , craft paper, , gum shoes, , aluminium strip of sizes, , pg clamps for 25 kva to 250 kva, , oil seals, , cork sheet, , old sarees, , nut & bolts 2" (16 & 18 no), , bush clamp ht, , cork washers of sizes, , pallet trolley 2.5 mt capacity, , oil testing machine (automatic motorised), , multimeter (waco make), , meggar 2500 mega ohm (waco make), , meggar 5000 mega ohm (waco make), , turn ratin meter (conforming isi standardel

State Government

CTN :45364223

05 Jun, 2026 7.50 Lacs

Alappuzha - Kerala

Tender For purchase of painting items - purchase of painting items, enamel white make: asian / jotun/ growel sample required, enamel p.o red make: asian / jotun/ growel sample required, enamel black make: asian / jotun/ growel, epoxy phirozha grey make: asian / jotun/ growel, rough roller brush ( cotton) reusable type make: asian / jotun/ growel 4", brush (flat type ) make: asian / jotun/ growel 3", water paper make: asian, grade 80,23 cm*28 cm, epoxy grey primer make: asian / jotun/ growel, epoxy thinner make: asian / jotun/ growel, banian waste, red oxide metal primer make: asian / jotun/ growel, turpentine (enamel) make: asian / jotun/ growel, putty blade 4" square, water paper make: asian, grade 120,23 cm*28 cm, rough roller brush ( cotton) reusable type 7", flat brush 4", marking black pencil apsara, chemical protection gloves ultra nitrile , length above 30cm thickness : above 3mm, total face shield material : acylic provision for head band adjustment, respiratory mask with catridge size : medium, model : 3m 6200, catridge for the above mask 3 m, fuel transfer pump material plastic , manually operating, stencil cutter with blade model ; m9, length : 5.5", antiskid epoxy paint with hardner green make : asian / jotun/ growel, epoxy black make : asian / jotun/ growel, safety ear cuf (protector) for noice reduction over the ear noice cancellation type , material : soft cusion pad with plastic cover

CTN :45329379

16 Jun, 2026 NA

Bandipora - Jammu And Kashmir

Tender For stage contract for supply of workshop/line material as and when required during financial year 2026-27 or till next contract gets finalised - electrical store/workshop items/: as per is standards and kpdcl approved vendors only wherever applicable, bush rods 12mm(lt) of standard make, bush rods 19mm(lt) of standard make, bush rods 25mm(lt) of standard make, bush rods 30mm(lt) of standard make, ht bush for dts of standard make(33/11kv as per requirement and relevant is), lt bush set for 250kva dt of standard make, lt bush set for 63kva dt of standard make, lt bush set for 100kva of standard make, aluminum thimbles 95sqmm of standard make, aluminum thimbles 120sqmm of standard make, aluminum thimbles 185sqmm of standard make, aluminum thimbles 240sqmm of standard make, aluminum thimbles 300sqmm of standard make, soldress clamp for 630kva, soldress clamp for 400kva of standard make, soldress clamp for 250kva of standard make, soldress clamp for 100kva & 63kva, gi channel/angle/flat/clamps of sizes (as per requirement), gi v cross-arm with top bracket including clamp(2 nos), 11 kv gapless surge arrestor,9 kv ,10 ka ,la with polymer housing, stn. type, 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, 11 kv horn gap fuse set 3 phase 200a, 11 kv heavy duty link set (polymer) line type with 6mm copper blade and 02 no. 8ft. gi channel, clamps and nuts and bolts, 11 kv pin insulators (polymer/porcelain) with pins(5kn), 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, lt shackle with mukhi clamps including gi nuts & bolts, gi nuts & bolts of sizes with full thread, manilla rope, gi wire 8 swg, suspension/tension clamp with eye hook as per kpdcl standards, insulating piercing connector (10-95sqmm), straight through cable jointing kit for 35/50sqmm ltab, straight through cable jointing kit for 75/95/120sqmm ltab, heat shrinkable outdoor cable termination kit, 50sqmm lt ab cable (3x50+1x16+1x35) sqmm xlpe (1.1kv, 3+1c, al), 35 mm ab (ht) cable (3x35+1x35 mm ) xlpe, dpc aluminium of sizes 13/14/16/18swg of standard make, super enamelled(se) of sizes 13/14/16/18/21swg of standard make, lathoride paper 10 mil of standard make, exchange of 1kg fresh al dpc by scrap dpc, exchanege of 1 kg fresh bush rods by scrap bush rods, lathoride paper 20 mil of standard make, ht paper 3 mil of standard make, hard card board 1/1.5/2/3mm of standard make, fiber tubes of standard make, cotton tape/ nawar of standard make, cork washers (32x12)5mm, cork washers (50x28)5mm, cork washers (110x74)5mm, cork washers (45x20)5mm, cork washers (60x32)5mm, cork washers (70x45)5mm, cork washers (90x50)5mm, cork sheets(24x36) 3 mm, cork sheets(24x36) 4mm, cork sheets(24x36) 5mm, cork strip(40x3) mm, cork strip(40x5) mm, oil seals for 250kva of standard make, oil seals for 100kva & 63kva of standard make, m seal, cotton tap 1" size (length 35 meter), nawar tap 1 size 35 meter long, tape roll pvc, old saree/doti cloth, insulating gum of standard make, aluminum strip of sizes (3/6, 3/7, 4/8, 4/10 mm etc ) of standard make, rubberized cork sheet 4mm thick, 2 feet *3 feet, rubberized cork sheet 3mm thick, 2 feet *3 feet, ht brown paper 3.0/2.5 mil, packing sheet (1mm)press card board 1/2/3mm, synthetic enamel paint grey colour, varnish dr.beck/empire, glass wool sleeves of sizes, fevicol, backlite tubes 1/2 inch,(1mtr length), packing gutties, electrical grade kraft paper,4mil, rubber washers ( m-12 ht oil seal),, rubber washers ( m-12 lt oil seal),, rubber washers ( m-16 lt oil seal),, rubber washers ( m-20 lt oil seal),, rubber washers ( m-25 lt oil seal),, rubber washers ( m-30 lt oil seal),, fiber glass sleeves 2mm, fiber glass sleeves 3mm, fiber glass sleeves 4mm, fiber glass sleeves 5mm, fiber glass sleeves 6mm, fiber glass sleeves 8mm, fiber glass sleeves 10mm, fiber glass sleeves 12mm, fiber glass sleeves 15mm, oxygen cylinder for welding with water c

State Government

CTN :45314379

05 Jun, 2026 7.50 Lacs

Alappuzha - Kerala

Tender For purchase of painting items - purchase of painting items, enamel white make: asian / jotun/ growel sample required, enamel p.o red make: asian / jotun/ growel sample required, enamel black make: asian / jotun/ growel, epoxy phirozha grey make: asian / jotun/ growel, rough roller brush ( cotton) reusable type make: asian / jotun/ growel, brush (flat type ) make: asian / jotun/ growel, water paper make: asian, grade 80,23 cm*28 cm, epoxy grey primer make: asian / jotun/ growel, epoxy thinner make: asian / jotun/ growel, banian waste, red oxide metal primer make: asian / jotun/ growel, turpentine (enamel) make: asian / jotun/ growel, putty blade 4" square, water paper make: asian, grade 120,23 cm*28 cm, rough roller brush ( cotton) reusable type 7", flat brush 4", marking black pencil, chemical protection gloves ultra nitrile , length above 30cm thickness : above 3mm, total face shield material : acylic provision for head band adjustment, respiratory mask with catridge size : medium, model : 3m 6200, catridge for the above mask 3 m, fuel transfer pump material plastic , manually operating, stencil cutter with blade model ; m9, length : 5.5", antiskid epoxy paint with hardner green make : asian / jotun/ growel, epoxy black make : asian / jotun/ growel, safety ear cuf (protector) for noice reduction

State Government

CTN :45308064

03 Jun, 2026 85.00 Lacs

Ajmer - Rajasthan

Tender For supply of f construction materials (such as grail, quarry, ravish, brick first class, stone, sand/gabri, saffron, broken, gitti, cement, lime, pattiya, winding wire, masonry scrap stone, iron doors and windows, enamel paint etc. materials, water tanker supply and cement concrete mixer, road roller, cement concrete interlocking block etc. on rent)

Central Government/Public Sector

CTN :45037375

26 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of pallets to the attached drawing number icf/j&t/misc-3088, for storage of scrap sheet off cuts. painting condition as mentioned below. (this painting condition supersedes painting condition mentioned in the drawing) pallet to be painted with a) two pack epoxy primer, b) pu primer/undercoat and c) pu enamel topcoat. before application of the primer a good surface preparation like degreasing is to becarried out by washing or wiping with suitable solvent. thoroughly sand the surface with emery paper 180, so as to remove loose rust and wipe clean. apply 2 pack epoxy primer. before applying pu primer/under coat sand the primer with emery paper no. 400. wipe clean and ensure that the surface is free of particles. apply pu primer/under coat. before applying top coat, sand the pu primer/under coat with emery paper no. 400. wipe clean and ensure that the surface is free of particles. apply pu enamel topcoat (brands : asian or berger or indigo or dulux or nerolac). colour: ral 2004 (pure orange) shade. note: topcoat to be applied only after getting confirmation of the exact colour shade of the respective brand from the consignee. allocation: p 4175 4000 5000 j 004 000 [ warranty period: 30 months after the date of delivery ]

CTN :45264861

29 Jun, 2026 NA

Kanchrapara - West Bengal

Tender For supply of set of pu paints and painting items for wag7 loco. one set consists of items and quantity as per annexure attached. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45220335

25 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond & u/s pressed/ corroded/dinged/damaged / paint drums and pressed enamel/adhesive cans with/without sediments in top open/closed condition in as is where is basis.note:1. cpcb certificate to be produced at the time of bidding and delivery. 2.segregation and removal of any available sediments from drum not permitted. 3.loading must be effected from one end to the other end. pl no: 98981535

Painting Items Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector