Latest painting materials Tenders | Government painting materials Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45301374

29 May, 2026 NA

Barasat - West Bengal

Tender For repairing of 1 no. of 315 kva dtr ( indoor type ) with supply of materials and testing at rabindra bhawan, barasat under north 24 parganas zilla parishad. - hv bus hing 12 kv 630a , lv bus hing 1.1 kv 630a, , 1.1kv 630a stud-bolt with fittings - brass, , 34kv 250a stud-bolt with fittings - brass, , arcing horn, , insulating materials raman make, , insulating materials senapati 0.75mm, , cotton tape 315 kva, , gasket sheet 6 mm, , ms nuts, bolts & washers, , oil seal hvside, , oil seal lyside, , silica gel breather with silica gel of 500gm, , hv coil copper dpc, , loss 5% allowed, , transformer oil (ehv grade), , labour charges, , final survey with repairing charge 315 kva, , re-assembly & boxing up of 315 kva including testing, , external painting 315 kva, , preparation & fitting of new coil - dpc (for hv cu coil), , preparation & fitting of new coil - dpc (for lv coil), , re winding of existing coil - dpc (for lv cu coil), , dismantling & re-installation of 315 kva transformer with necessary connection of terminals, earthing etc. at site, , transportation of transformer and oil barrels from site to workshop and vice versa

Central Government/Public Sector

CTN :45123739

01 Jun, 2026 NA

Korba - Chhattisgarh

Tender For corrigendum : name of job: package - a : erection, testing, commissioning, trial operation & handing over of boiler and its auxiliaries including pressure part, non-pressure parts, duct dampers and its support structure, rotating equipment’s, air pre-heaters, id/fd/pa fans, mills, refractory, fdps piping and system in boiler & bunker area from nearest fire water line header, handling of materials at bhel / clients stores / storage yard and transportation to site, preparation of foundation, fixing of hangers & supports, application of lining, insulation, supply & painting, stenciling & labelling and common system of unit#1 at 2x660 mw cspgcl korba west tps, district korba, chhattisgarh.

CTN :45288199

06 Jun, 2026 10.00 Lacs

Satna - Madhya Pradesh

Tender For supply of lok nirman samagri for f.y. 2026-27 - opc cement, ppc cement, khajuraho sand, son sand, local potter-made bricks, allahabad chimney bricks, chimney bricks (20x10x20 cm), stone blocks (20x20x10 cm), 40mm crushed gravel, 20mm crushed gravel, 10mm crushed gravel, 6mm crushed gravel, crushed stone dust, hard kankar (nodular lime), soil, stone slabs (20mm), stone slabs (30mm), stone slabs (40mm), stone dasas (100mm), shuttering (columns/beams, etc. – iron/plywood), shuttering (roof – iron/plywood), shuttering (roof – wood), tensile steel rebar (10mm dia), tensile steel rebar (12mm dia), tensile steel rebar (16mm dia), tensile steel rebar (20mm dia), binding wire, mesh netting (size: 25x25mm), chain link fencing, fencing wire (6mm bar / g.i. barbed wire), m.s. grills and meshwork, lime, white cement, distemper (for wall painting/finishing), red oxide (for painting iron/metal materials), varnish (for painting/finishing wood materials), paint (emulsion/iss/ssd/asian deluxe), turpentine oil, concrete pole (0.1 x 0.1 x 1.5m), concrete pole (0.1 x 0.1 x 0.6m), 300mm. 450 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 900 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 1200 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 600 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 300 mm cement concrete pipe np3 (2.50 kg/cm²), 450 mm cement concrete pipe np3 (2.50 kg/cm²), 600 mm cement concrete pipe np3 (2.50 kg/cm²), painting brush 2-inch, painting brush 4-inch, high-quality plastic bucket 5-liter, translucent acrylic plastic sheet (3 mm thick), paver block (80 mm x 100 mm), wall putty.

CTN :45289871

06 Jun, 2026 40.00 Lacs

Awantipora - Jammu And Kashmir

Tender For stage contract for carrying out various electrical maintenance works including sitc, itc of various line materials and distribution substations and dismantling of existing deteriorated out lived electrical infrastructure for the year 2026-27 under th - supply, installation, testing and commissioning of 3-phase 25 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 63 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 100 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 200 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 250 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, sitc of 11 mtr long st poles 410, sp-56 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 9 mtr long st poles 410, sp-33 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 8 mtr long st poles 410, sp-15 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 8 mtr long pcc poles including manual, mechanical carriage, excavation of pole pits with inscription of permenent marking on each pole "name of scheme-2019-20/xx" (xxx mean pole numbers say 01,02...) in white paint in backgound of green paint at conspicious place, providing & fixing of pole earthing as per rec standard as per j-1 (spiral earthing) drawing, supply,fixing of spike earthing rod 20mm 2,5 mtr long with gi strip (25x3)mm, supply and painting of each pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint), providing, errection, testing & commissioning of channel cross arms, v-cross arms, sub-station channels & angle iron braces, transformer beltings, including back clamps for fixing cross arms etc fabricated out of galvanized iron of different sizes (rec standard) & to be fixed with gi nuts & bolts and washers., providing, errection, testing & commissioning of channel cross arms, v-cross arms, sub-station channels & angle iron braces, transformer beltings, including back clamps for fixing cross arms etc fabricated out of mild steel of different sizes (rec standard) & to be fixed with gi nuts & bolts and washers., providing & and fixing of 11 kv pin insulators (polymer) with pins ( 5 kn), providing & fixing of 11 kv, g.o ab switch , 3-phase, 200a (09 insulator post type) with arragement for pad locks & operating rod . the operating rod should be g.i pipe (b-class) of 25 mm dia of requisite length., providing & fixing of 11 kv horn, gap fuse 3-phase 100a, providing & fixing of 11kv link set 3-phase, 200 a (station type), sitc of 11kv isolator double break, 3-pole, 630 amps, horizontal mounting type , with earth switch, providing & fixing supply and installation of gapless surge arrestor,9 kv,10 ka, la with (polymer) housing, station type, providing & fixing of lt fuse set of suitable capacity for 63kva,100kva,200kva (as per tender drawing attached), providing & fixing of 11 kv disc insulators (polymer) complete with fitting( 45 kn), providi

CTN :45250319

26 May, 2026 21.33 Lacs

Kohima - Nagaland

Tender For comprehensive maintenance of gpra, lower ag colony, kohima, nagaland during year 2026-27 for 12 months. sh: labour for day to day maintenance works, supply of materials for day to day maintenance works, distempering and synthetic enamel painting works during re-allotment of quarters, painting of gs sheet roofing, providing and laying pcc 1:5:10, 1:2:4, cleaning of overhead tank, underground sump, septic tank, manhole and drain.

CTN :45157163

08 Jun, 2026 30.00 Lacs

Jhabua - Madhya Pradesh

Tender For supply of pwd material others as per list for financial year 2026-27 - financial rates per unit for the financial year 2026-27: sand, gravel (10 mm), stone chips (6 mm), gravel (20 mm), gravel (40 mm), isi-grade cement (major brands), black sand, hard murram, banda, black soil, brown soil, corrugated sheets, coated sheets, iron reinforcement bars (6 mm isi), iron bars (8 mm), iron bars (10 mm), iron bars (12 mm), iron bars (16 mm), iron flat bars, wire mesh, lime wash, ochre wash, asian distemper, asian oil paint, bricks (class 1, 2, 4), cement sheets, ready-mix asphalt, turpentine, clay bricks, jcb machine, poclain machine, centering materials (rental), vibrator (rental), concrete mixer, lorry/truck, white cement, formwork, tiles, marble stone, 9-inch bricks, 12-inch bricks, 18-inch bricks, [pipe sizes] 1/2", 1", 3/2", 3/4", 2", 3", 4", pop (plaster of paris), granite, water tanker (3000 liters), water tanker (4000 liters), water tanker (6000 liters).,hume pipe np2 -100 mm, hume pipe np3-100 mm, hume pipe np4-100 mm, hume pipe np2-125 mm, hume pipe np3 np4-125 mm, hume pipe np4-125 mm, hume pipe np2 -150 mm, hume pipe np3 -150 mm, hume pipe np4-150 mm, hume pipe np2-300 mm, hume pipe np3 -300 mm, hume pipe np4-300 mm, hume pipe np2 -350 mm, hume pipe np3 -350 mm, hume pipe np4-350 mm, hume pipe np2 -400 mm, hume pipe np3 -400 mm, hume pipe np4-400 mm, hume pipe np2 -450 mm, hume pipe np3 -450 mm, hume pipe np4-450 mm, hume pipe np2 -500 mm, hume pipe np3-500 mm, hume pipe np4-500 mm, hume pipe np2-600 mm, hume pipe np3 -600 mm, hume pipe np4-600 mm, hume pipe np2-900 mm, hume pipe np3 -900 mm, hume pipe np4-900 mm, hume pipe np2 -1000 mm, hume pipe np3 -1000 mm, hume pipe np4-1000 mm, hume pipe np2-1200 mm, hume pipe np3 -1200 mm, hume pipe np4 -1200 mm, hume pipe np2-1400 mm, hume pipe np3 -1400 mm, hume pipe np4 -1400 mm, rcc 3 seater color cement bench, rcc 3 seater garden bench, multicolor wall painting work with primer & scrapping comlete as directed by eng. encharge, multicolor wall writing work, multicolor wall art work 3d/graphity/realistic with primer & scrapping comlete as directed by eng. encharge, multicolor wall art work traditional with primer & scrapping comlete as directed by eng. encharge, hige altittude wall painting work, murals 2d with material,painting and fixation as directed by eng. encharge, murals 3d with material,painting and fixation as directed by eng. encharge

State Government

CTN :45127233

03 Jun, 2026 50.00 Lacs

Rewa - Madhya Pradesh

Tender For block-a cleaning materials supply in central jail rewa m.p.2nd call - mustard oil , laundry soap , washing powder , bathing soap , quicklime / velvet lime , wall-painting brush (all sizes) , painting brushes (all sizes) , paints (all colors) , toothpaste , aftershave lotion (dettol) , shaving blades (pack of 10) , alum , straight razor , shaving brush , scissors (new) , scissor repair service , shaving cream (100g pack) , distemper paint (all colors) , emulsion paint (all colors) , bathroom cleaner , scented phenyl , toothbrush , turpentine oil , date palm leaf broom , bamboo broom , twine / jute string , colored clay (red/yellow/white) , clay water pot (15-liter capacity) , bleaching powder , plastic comb , plastic bucket (15-liter capacity) , plastic mug (1-liter capacity) , raincoat / rain sheet (yellow plastic) , umbrellas , green mat

State Government

CTN :45279132

04 Jun, 2026 1.66 Crore

Udhamsign Nagar - Uttarakhand

Tender For work of construction of a new 11 kv feeder for bifurcation of overloaded 11 kv chakarpur feeder under edd khatima in capital s.i. head, including supply of decentralized materials, as per tender specification. - annexure-a (supply of following material as per upcl norms.), bracing clamp for sp-55 with nut and bolt., pp & clamp with nut and bolt st pole sp-55., stay clamp for sp-55 with nut and bolt., pp & clamp with n&b st pole sp-72., pp & clamp with n&b pcc pole, 8.5 mtr., stay clamp for pcc pole., ht stay insulator., 33 kv suspension ties on every pin insutlator., ipc with aluminium bail for earthing., 11 kv ipc for covered to covered cond., 11 kv ipc for covered to bare conductor., 11 kv mid span jointing kit., 11 kv aaac covered cond. al-59, 99 sq.mm., 11 kv tension clamp with bail & ipc., annexure-b (following work as per upcl norms), chemical earthing., fabrication of steel., excavation of pit for stay set., erection of 11 kv stay set,, grouting of stay set., excavation of pit for pole., erection of single pcc pole., erectin of single sp-55 pole., erection of single sp-72 pole., erection of pcc double pole., erection of sp-55 double pole., grouting of pole., muffing of pole., painting of sp-55 pole., lopping and choppong of tree branchases., cartage of pcc pole, 51-70 k, cartage of sp-55 pole, 51-70 km., cartage of sp-72 pole, 51-70 km., cartage of petty material, 51-70 km., headload cartage of pcc pole, 0-1 km., headload cartage of sp-55 pole, 0-1 km., headload cartage o sp-72 pole, 0-1 km., headload cartage of material, 0-1 km., fixing of 33 kv suspension ties., fixing of ipc with al, bail for earting., jumpering of d/p tpmo, fuse set and t/f., jumper section pole., fixing of 11 kv 90 kn tension clamp b&ipc., fixing of 11 kv ipc for cc to cc cond., fixing of 11 kv ipc for cc to bare cond., fixing of 11 kv mid span jointing kit., laying spreading, stringing aac conductor

corporations/Associations/Others

CTN :45263412

05 Jun, 2026 NA

Pudukkottai - Tamil Nadu

Tender For supply of 4500 sets of stay set complete - supply of silicagel blue, 0.6kva ups, stay set complete( quote price for single unit only), silicagel blue 10 to 12mm, pole pit for 9.0m and 9.14 m psc/rcc / all metal poles (each pit) 1.25 x 0.6 x 1.83 mtr, ordinary soil, semi rocky soil, heavy rocky soil where blasting/ cheseling required [specific approval should be obtained from concerned ee], stay pit, in ordinary soil [0.95 x 0.6 x 1.2m], semi rocky soil, stay pit in heavy rocky soil where blasting/ cheseling reqiured [specific approval should be obtained from concerned ee], erection of poles & stays (including refilling of excavated earth), erection of 7.5m / 8.0m poles [rcc / psc], erection of 9.00m / 9.14m rcc / psc/rail pole, tubular pole and all metal poles, stay set, erection stay set complete, stay erection without rod and pit, replacement of stay rod only. (including stay pit excavation & refilling & erection), replacement of guy shackle only in existing stay, erection of line materials, fixing of lt 1 ph "x" arm, fixing of lt/ht ti fitting, fixing of lt 3 ph "x" arm, fixing of 3[1/2] v ` x arm, fixing of 4[1/2] v ` x arm, fixing of 5 v x arm, fixing of tapping channel / guarding "x" arm, providing of line spacers in lt lines 1 phase, providing of line spacers in lt lines 3 phase, erection of ab switch with pt insulator & jumpering complete, erection of centre rotating switch ab switch complete, fixing of ht pin insulator / strain disc, 11 kv pin insulator with pin, 11 kv strain disc / polymer disc with hardware, 22 kv pin insulator with pin, 22 kv strain disc / polymer disc with hardware, 33 kv pin insulator with pin, 33 kv pin strain disc/polymer disc with hardware, fixing of lt pin insulator with pin, lt shakle with hardware, fixing of aluminium knob, paving stringing and sagging of conductor including binding of pin and proper tight [including transport of condutor from road side to work spot] per run, upto 7/2.59 mm acsr, 7/2.50 aaac including pvc cable upto 25 sqmm, acsr 7/3.35mm & 7/ 3.15 aaac including pvc cable above 25 sqmm, acsr 7/4.09 mm, above 7/4.09 mm acsr & dog conductor, earthing wiring and connection including transporting of earth pipe and excavation of pit], transformer structure earthing 10ft depth - 3 nos of pipe through tubes, dp earthing including all works [double side earthing], erection of 4th earth pipe including earthing, earthing of poles, earth pit masonary work 3 nos earth pits or using 3 nos concrete tub., replacement of detoriated earth pipe per location, concreting with mixture 1:3:6 [including all materials]., mass concreting for centre support for 2 feet including all materials, mass concreting for pole0.6x0.6x1.25m.with coping, sleeve concreting for pole 0.6 m x 0.6m x 0.3 m with coping, sleeve concreting for stay set 0.3 m & 0.75 long, erection of distribution transformer structure complete, excavation of structure pole pits 0.9 x 0.9 x 1.83 mtr, transporting of pole to pit location 2 nos., erection of poles 2 nos, excavation of stay pit 4 nos, erection of stay set (4 sets), mass concreting (cement:sand:jelly supplied by the contractor) 2 nos., erection of 22 kv ab switch, ttransformer structure earthing 10ft depth - 3 nos of pipe through earth tubes, erection of top channel, bed channel [2 nos channel] erection, cross with stud for bed channel erection, erection of belting angle / hg fuse angle, erection of hg fuse set, erection of ht las with jumpering and earthing, erection of lt las with jumbering and earthing, erection of jumpering [ht side], transformer wiring in lt side including jumpering bus bar etc., erection lt open type fuse unit arrangement single, erection lt open type fuse unit arrangement double, painting of stru. complete excluding dt [two coat of red oxide] all metal parts(excluding cost of paint)., painting of stru. complete excluding dt [one coat alu paint, excluding cost of paint), colour washing of 2 numbers structure pole [excluding

Painting Materials Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others