Latest panel door Tenders | Government panel door Tenders

corporations/Associations/Others

CTN :42063030

06 Oct, 2025 1.00 Crore

Kashipur - Uttarakhand

Tender For supply of electric slaughterhouse (for animals) - primary & secondary chamber primary chamber* single chmber furnace of size 4270 mm x 1980 mm x 1820 mm.* plate thickness- 5 to 8 mm.* lining of interior of furnace- 400 mm wall cermaic blanketk, high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006* operation temperature- 800o c to 1000o c.* top smoke discharge for secondary chamber.* ash removal doors to be provided for ash collection after combustion.* ingtion- automatic.* temperature control- automatic* material loading- front gate- automaticsecondary chamber* operating temperature - 1050o c to 1250o c.* material of construction- mild steel with high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006.* made from is 2062 grade mild steel materials (or better) duty lined with insulation bricks, refractory bricks, hysil boards.* burner mounting arrangement with refractory burner block.furnace door:furnace door charging & discharging side fabricated from 5mm to 6 mm thickness door opening & closing automatic.ash door:* ash door (with casted cement lining) to remove nonhazardous ash from the chamber.* top inlet bottom smoke discharge for longer gas residence time.* furnace door charging & discharging side fabricated from 5mm to 6 mm thickness.* door opening & closing automatic/manual.refractory:{complete set of refractory shaped bricks for construction electric cremation of i.s. 8 bricks (approx. 1007nos bricks,insulation 4000 nos. refractory slid for construction of flue duct , as required, refractory heat resistant fire clay , ceramic blanket hysil board, asbestos ropes etc. as required for outer side of the furnace shall be constructed by red bricks by sand and cement as mortars and construction of chimney from basement of roof level including painting i.e. bricks portion shall be painted by two coats of red oxide as primer and to coats of synthetic enamel. (a) complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of heating elements, resting of dead body with sufficient opening for falling of ashes to the ash chamber & sufficient ventilation for fresh air spraying. (b) complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out aces from the rear side and sufficient ventilation for fresh air injection. complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air}. osspl make, thermocouple heat sensor supply & fixing the thermocouple of heat sensing range 0 - 1200 c (cr.-al) sensor housed in s.s 304 casing of dimension 1200 mm long 22 mm od complete encased to and fitted terminal on other and for connection of compensating of 2 cores 0.5 aq. mm cr- al for heat sensing from thermocouple to temperature controller covered with asbestos embedded rope about 50 m length as per direction of eic., f.d. fan/centrifugal air blower with electric motor * supply and delivery at site, installation, testing and commissioing.* of fresh air injection system forced draft fan mild steel.* type: centrifugal.* capacity:- 500 cmh.* pressure:- 220 mmwg.* motor rating:- 2hp (kirloskar/crompton), burner assembly * total 2 nos. of lpg/cng/png fired automatic burner required.* the burner should be provided with comprising diffuser plate/ burner plate, photo cell housing electrodes with holding brackets, solenoid valve, electrodes caps, flexible hose pipes, spary nozzles, oil filter, blower, etc. connected with electric motor (each burner) & in built air regulator.* burners will work on auto on/off as per the set temperature for the combustion chambers.* the in-built bolwer will provide continuous air flow to the burners to prevent demages due to high temperature., supply and fixing of manifold with a p

corporations/Associations/Others

CTN :42135792

22 Oct, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply of 150nb ss316gr gate valves for suction and discharge pipe lines of chlorine booster pumps sea water booster pumps and gland cooling pumps of cooling water pump house 2

CTN :42021067

09 Oct, 2025 NA

Umaria - Madhya Pradesh

Tender For item supply for forestry item - white paint (asian, berger, nerolac brand)_(premium quality), green paint (asian, berger, nerolac brand)_(premium quality), aluminum paint (asian, berger, nerolac brand)_(premium quality), black japan paint_(premium quality), measuring tape 2 metre_(freemans brand), measuring tape 5 metre_(freemans brand), measuring tape 10 metre_(freemans brand), measuring tape 30 metre_(freemans brand), paint brush small (2" inch)_(premium quality), paint brush big (4" inch)_(premium quality), paint brush big (6" inch)_(premium quality), oil chalk_(premium quality), writing brush (plate no.-1)_(premium quality), writing brush (plate no.-2)_(premium quality), tupentine oil_(premium quality), coal tar_(premium quality), joga rassa_(premium quality), nylon rope_(premium quality), zed pen nipul_(premium quality), cross cut saw_(premium quality), chapras_(premium quality), kanasi_(premium quality), marker pen_(premium quality), power chain saw machine_(petrol with 16 inch bar and chain ), cement ppc grade 53 (birla, acc, utratech)_(premium quality cement. the compresive strength must be 53 mpa after 28 days of curing. weight of bag is 50 kg. ), cement opc grade 43 (birla, acc, utratech)_(premium quality cement. the compresive strength must be 43 mpa after 28 days of curing. weight of bag is 50 kg.), sand (river) _(sand must be free from silt and other organic impurities. ), sand (balu) _(sand must be free from silt, stones and other organic impurities.), murrum (red)_(well graded, free from vegetation), coarse aggregate 10 mm _(cubical and angular shape without dust and organic matters), coarse aggregate 20 mm _(cubical and angular shape without dust and organic matters), coarse aggregate 40 mm _(cubical and angular shape without dust and organic matters), boulder stone (60-100 mm)_(round shape ), stone dust_(without soil and stone ), tmt bar 6 mm_(isi mark thermo mechanically treated bars), tmt bar 8 mm_(isi mark thermo mechanically treated bars), tmt bar 10 mm_(isi mark thermo mechanically treated bars), tmt bar 12 mm_(isi mark thermo mechanically treated bars), binding wire _(corrosion resistance, galvanized iron coating ), brick (fly ash) _(modular size 190x90x90 mm), brick (open bhatta)_(well brunt 9x4x3 inch size, uniform copper-red color and free from cracks, flaws), brick (chimney)_(well brunt 9x4x3 inch size, uniform copper-red color and free from cracks, flaws), kota stone_(25 mm thick), granite stone (kitchen)_(premium quality), vitrified tiles 2x2 feet_(glossy double charge), vitrified tiles 2x2 feet_(glossy double charge), vitrified tiles 2x4 feet_(glossy double charge), vitrified tiles 4x4 feet_(glossy double charge), bathroom tiles 12x12 inch _(premium quality ceremic tiles), wall tiles 18x12 inch_(premium quality ceremic tiles), border tiles 8x3 inch_(premium quality ceremic tiles), paver block_(dumble shape 200x160x80mm premium quality), paver block_(hexagon shape premium quality), wood primer_(premium quality), wood paint_(premium quality), wooden door frame 7.0" x 3.6"_(good quality timber), wooden door frame 7.0" x 2.9"_(good quality timber), window frame 5.0" x 4.6"_(good quality timber), window frame 4.0" x 4.6"_(good quality timber), window frame 3.0" x 4.6"_(good quality timber), ventilation frame 2.0" x 1.6"_(good quality timber), wpc door & window frame _(premium quality), iron door with making & fitting charge_(premium quality), aluminium door_(premium quality), panel door_(premium quality), doors & window panel prelaminated board with decorative lamination_(premium quality), plywood 18mm _(premium quality), plywood 9mm _(premium quality), mica 0.8 mm_(premium quality), colour mica sheet _(premium quality), fevicol_(premium quality), sand paper_(premium quality), mosquito mesh steel_(premium quality), window grill with making charge_(premium quality), aluminum window frame 3 track sliding (2 glass + 1 mosquito shutter)_(5 feet x 4 feet premium quality), aluminum window frame 3

CTN :42109926

15 Oct, 2025 NA

Sundergarh - Odisha

Tender For tender for supply of vcb spares for bhel breakers d d - closing unit assembly 35211001919 v00 , tripping unit assembly 35211001918 v00 , motor cutoff limit switch assembly 25211 , lead screw assembly 35211001904 v00 , set of clips 25211001588 001 to 006 , truck nylon wheels 35212001837 001 , nylon rollers for shutter lifting 450950 , manual push button red green 4521100159 , dumping rubber pad 45211001597 001 , auxiliary rod 35212001517 003 , swing bolt 35212001519 001 , bhel 6point6 kv plunger 35211001846 001 , bhel 6point6 kv plunger pin 35212001512 001 , door lock assy 35215001713 005 , shutter arrgtpoint 35215001834 v01 , limit switch test service 15095001531 v , busbar joint pvc shroud point25215001810 v00 , bhel 6point6 kv dc diode plate , instrument panel door lock bhel drg nopoint3 , inst pnl door lock steel rod catcher bhe , polyamide support instrument panel lock

CTN :42111002

20 Oct, 2025 13.00 Lacs

Kangra - Himachal Pradesh

Tender For supply of excavation of levelling on ground , construction of slab , construction of plinth beam , laying of floor with pcc , installation oblique erection of ms sq pipe , fabrication of super structure on beam of square pipe , provn of cgi sheet 0.5mm thick , installation of doble charge vitrified non skid tiles , provn of false celling of size , provn of roof drainage as per directions , provn of 12mm thick toughen glass with two doble panel doors , provn of steps on suggested entrances with tiles , provn of exost fan , provn of celling led light , provn of electrical points for acs fans sockets and switches

CTN :42086624

04 Oct, 2025 NA

Multi City - Multi State

Tender For supply of perspex sheet for t.k panel door

CTN :42087044

21 Oct, 2025 NA

Lucknow - Uttar Pradesh

Tender For repairing of various electrical equipments of lhb tl/ac coaches- transformers, mono block pump, rebc/ebc, battery charger, bldc fan, ael, night light, fabrication and installation of sbc panel doors, repair of hinges/locks and shifting of smoke detector in power cars of ljn and gkp depot of ljn division.

corporations/Associations/Others

CTN :41859541

06 Oct, 2025 1.79 Crore

Ahmedabad - Gujarat

Tender For providing gate operation for regulating discharge/ water level, removing floating debris near gates, security of gates including jungle cutting near structures and vigilant inspection for vallabhipur branch canal between ch. 62.975 km to ch. 118.751 km for two years (year 2025-27).

CTN :41923834

08 Oct, 2025 NA

Multi City - Multi State

Tender For supply of perspex sheet for t.k.panel door

Central Government/Public Sector

CTN :41914741

27 Oct, 2025 NA

Lucknow - Uttar Pradesh

Tender For set of door glass consist of 3 item each [set of door glass consist of 3 item each qty 01 no/set. 1) tk panel door glass size 630x142x6 mm as per drg no. dsl/amv/sk no. 649/25. 2) tk panel door glass size 685x184x6 mm as per drg no. dsl/amv/sk no. 649/25. 3) dor glass for 24 series locos 590x478x6 mm as per drg no. dsl/amv/sk no. 650/25. warranty period 30 months from the date of supply.]

Panel Door Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector