Latest panel scrap Tenders | Government panel scrap Tenders

State Government

CTN :45319932

08 Jun, 2026 5.30 Lacs

Hanumangarh - Rajasthan

Tender For repair of electrical starter and cubical panel board of various rural water supply scheme under sub division tibbi

State Government

CTN :45319934

08 Jun, 2026 2.50 Lacs

Hanumangarh - Rajasthan

Tender For repair of electrical starter and cubical panel board of urban water supply scheme under sub division tibbi

corporations/Associations/Others

CTN :45205777

30 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For etender cum auction for sale of non moving and obsolete items ferrous and non ferrous scraps etc in available at central store gcc trichy and substores virudhachalam - lot - 1 ( items -2) 1.ct 110 kv 150-75-50/1a (metering ct ) 0.2 s accurasy -15 nos. 2.copper cable scrap (thennur yard ) - 9354 kg the details are given in the specifications., lot - 2. ( items -2 ) 1. miscellaneous iron scrap-16432kg 2.gi scrap ( thennur yard)-6276 kg the details are given in the specifications., lot-3 (items-1) 1.miscellaneous iron scrap (thennur yard)-12352 kg the details are given in the specifications., lot-4 (items-7) 1. miscellaneous iron scrap (collectorate yard) -8230 kg 2.bolt and nut gi 70 x 20 mm-500 kg 3.bolt and nut gi 40 x 20 mm-500 kg 4.bolt and nut gi 45 x 20 mm - 550 kg 5.bolt and nut gi 65 x 20 mm-459 kg 6.bolt and nut gi 65 x 18 mm-100 kg 7.bolt and nut gi 60 x 20 mm-300 kg the details are given in the specifications., lot-5 (items-1) 1. gi scrap (collectorate yard)-18666 kg the details are given in the specifications., lot-6 (items-1) 1. acsr scrap (thennur yard)-30937 kg the details are given in the specifications., lot-7 (items-1) 1. acsr scrap (thennur yard)-30110 kg the details are given in the specifications., lot-8 (items-1) 1.gi wire scrap (thennur yard)-13300 kg the details are given in the specifications., lot-9 (items-1 ) 1. gi / ms tower angle scrap (thennur yard)-53023 kg the details are given in the specifications., lot- 10 (items- 1) 1.gi / ms tower angle scrap (collectorate yard)-50000kg the details are given in the specifications., lot-11 (items-1 ) 1. gi / ms tower angle scrap (collectorate yard) - 53439 kg the details are given in the specifications., lot-12 (items-1 ) 1.empty steel drum 3 to 6 dia (thennur-82 & collectorate-19) -101 no. the details are given in the specifications., lot-13 (items-2) 1.empty barrel 40/45 gl capacity leaky- 194 no 2.empty barrel 40/45 gl capacity sh- 173 no. the details are given in the specifications., lot-14 (items-17) 1. condemned gas cylinder various size-29 no. 2.condemned fire extingushers various size-13 no. 3.alu . incl .aac cutbits scrap-1993 kg 4.scrap alu lug cable -775 kg 5. scrap gi with porcelin-659 kg 6. condemned dc panel scrap-5 no 7. machinary parts scrap- 1588 kg 8.scrap teak wood-6 kg 9.scrap meters/meter parts-33 kg 10. scrap aluminium with insulation-535 kg 11.cond petrol chain saw machine 22"- 1 no. 12. cond window type a/c 1.5 ton-4 no 13. cond battery charger-1 no 14. cond walkie talkie (set of 2 nos)-1 no. 15.cond split ac various capacity-6 no. 16.cond binoculars-1 no. 17. cond gas leakage detector-1 no. the details are given in the specifications., lot-15 (items-1 ) condemned lorry 10 ton capacity reg no tn 45- k 6734, ashoke leyland with stepney, jacky with lever & wheel spanner available at 230 kv auto ss campus perambalur - 1 no. the details are given in the specifications., lot-16 (items-4) 1. cond mini bus 1) reg.no:tn 49 f 3640, make:eicher mlv with stepney, jacky & lever.2.reg.no:tn 45 f 3689, make: ashoke leyland with stepney, jacky & lever. 3.reg.no:tn 45 k 5956, make: eicher lmv with stepney, jacky & lever. 2. cond van/ reg.no: tn 45 f 7571 make: bajaj tempo ltd., with stepney,jacky & lever available at 110 kv grid ss store campus.the details are given in the specifications., lot-17 (items-2) condemned lorry 10 ton capacity: 1.reg no tn 45 - p 8575, ashoke leyland with stepney, jacky with lever & wheel spanner avalable at 110 kv grid ss campus, m.c.road, thanjavur. 2.reg no tn 45/ q 6201, ashoke leylandwith out stepney, jacky with lever & wheel spanner avalable at 110 kv grid ss campus, m.c.road, thanjavur. the details are given in the specifications., lot-18 (item-2 nos.) condemned lorry 10 ton capacity: 1. reg no tn 45/ m 9769, ashoke leyland with stepney, jacky with lever & wheel spanner available at 110 kv grid ss campus/trichy store. 2.reg no tn 45/ f 8341, ashoke leyland with stepney, jacky with l

corporations/Associations/Others

CTN :45294072

08 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For etender cum auction for sale of non moving and obsolete items ferrous and non ferrous scraps etc in available at central store gcc trichy and substores virudhachalam - lot - 1 ( items -2) 1.ct 110 kv 150-75-50/1a (metering ct ) 0.2 s accurasy -15 nos. 2.copper cable scrap (thennur yard ) - 9354 kg the details are given in the specifications., lot - 2. ( items -2 ) 1. miscellaneous iron scrap-16432kg 2.gi scrap ( thennur yard)-6276 kg the details are given in the specifications., lot-3 (items-1) 1.miscellaneous iron scrap (thennur yard)-12352 kg the details are given in the specifications., lot-4 (items-7) 1. miscellaneous iron scrap (collectorate yard) -8230 kg 2.bolt and nut gi 70 x 20 mm-500 kg 3.bolt and nut gi 40 x 20 mm-500 kg 4.bolt and nut gi 45 x 20 mm - 550 kg 5.bolt and nut gi 65 x 20 mm-459 kg 6.bolt and nut gi 65 x 18 mm-100 kg 7.bolt and nut gi 60 x 20 mm-300 kg the details are given in the specifications., lot-5 (items-1) 1. gi scrap (collectorate yard)-18666 kg the details are given in the specifications., lot-6 (items-1) 1. acsr scrap (thennur yard)-30937 kg the details are given in the specifications., lot-7 (items-1) 1. acsr scrap (thennur yard)-30110 kg the details are given in the specifications., lot-8 (items-1) 1.gi wire scrap (thennur yard)-13300 kg the details are given in the specifications., lot-9 (items-1 ) 1. gi / ms tower angle scrap (thennur yard)-53023 kg the details are given in the specifications., lot- 10 (items- 1) 1.gi / ms tower angle scrap (collectorate yard)-50000kg the details are given in the specifications., lot-11 (items-1 ) 1. gi / ms tower angle scrap (collectorate yard) - 53439 kg the details are given in the specifications., lot-12 (items-1 ) 1.empty steel drum 3 to 6 dia (thennur-82 & collectorate-19) -101 no. the details are given in the specifications., lot-13 (items-2) 1.empty barrel 40/45 gl capacity leaky- 194 no 2.empty barrel 40/45 gl capacity sh- 173 no. the details are given in the specifications., lot-14 (items-17) 1. condemned gas cylinder various size-29 no. 2.condemned fire extingushers various size-13 no. 3.alu . incl .aac cutbits scrap-1993 kg 4.scrap alu lug cable -775 kg 5. scrap gi with porcelin-659 kg 6. condemned dc panel scrap-5 no 7. machinary parts scrap- 1588 kg 8.scrap teak wood-6 kg 9.scrap meters/meter parts-33 kg 10. scrap aluminium with insulation-535 kg 11.cond petrol chain saw machine 22"- 1 no. 12. cond window type a/c 1.5 ton-4 no 13. cond battery charger-1 no 14. cond walkie talkie (set of 2 nos)-1 no. 15.cond split ac various capacity-6 no. 16.cond binoculars-1 no. 17. cond gas leakage detector-1 no. the details are given in the specifications., lot-15 (items-1 ) condemned lorry 10 ton capacity reg no tn 45- k 6734, ashoke leyland with stepney, jacky with lever & wheel spanner available at 230 kv auto ss campus perambalur - 1 no. the details are given in the specifications., lot-16 (items-4) 1. cond mini bus 1) reg.no:tn 49 f 3640, make:eicher mlv with stepney, jacky & lever.2.reg.no:tn 45 f 3689, make: ashoke leyland with stepney, jacky & lever. 3.reg.no:tn 45 k 5956, make: eicher lmv with stepney, jacky & lever. 2. cond van/ reg.no: tn 45 f 7571 make: bajaj tempo ltd., with stepney,jacky & lever available at 110 kv grid ss store campus.the details are given in the specifications., lot-17 (items-2) condemned lorry 10 ton capacity: 1.reg no tn 45 - p 8575, ashoke leyland with stepney, jacky with lever & wheel spanner avalable at 110 kv grid ss campus, m.c.road, thanjavur. 2.reg no tn 45/ q 6201, ashoke leylandwith out stepney, jacky with lever & wheel spanner avalable at 110 kv grid ss campus, m.c.road, thanjavur. the details are given in the specifications., lot-18 (item-2 nos.) condemned lorry 10 ton capacity: 1. reg no tn 45/ m 9769, ashoke leyland with stepney, jacky with lever & wheel spanner available at 110 kv grid ss campus/trichy store. 2.reg no tn 45/ f 8341, ashoke leyland with stepney, jacky with l

Central Government/Public Sector

CTN :45287972

11 Jun, 2026 45.00 Lacs

Dibrugarh - Assam

Tender For repair and maint of overhead water tank, air compressor, irp, chemical dosing system, borewell, starter panel incl external pipeline network and connected items installed at various pump houses at af stn mohanbari

CTN :45063614

30 May, 2026 NA

Bankura - West Bengal

Tender For corrigendum : supply of 25vkoc001 c c - injector connection assly , injector holding flange assly. , pyrometric duct , expansion below , electronic governor-actuator , flex master con for dia 88.9-epdm , compensation sensor for exh.pyrometric duct , disc spring , piston ring , air valve , set of spare gasket & o rings , o ring dia 3 x dia 290 , o ring dia 3 x dia 260 , special seal , set of spares for abb vtc254 turbocharger , spare part kit for fw/sw heat exchanger , pt 100 converter with two threshold , ferquency preamplifier-engine speed , supply board , flash 64k card , communication module , pcmcia card , 16 analog input card , rtd input filed module , filed communication module , fuse 4a gg 10 38 , thermistor protection relay(aux415v ac) , injecting piping assly , set of seal for glacier filter , plug no4 , 25 cts , pyrometric duct bank b , expansion bellow , floating bush(te) , oil seal (190x160x15) , d/row sph rlr brg (100x165x52) , d/row sph rlr brg (120x180x46) , cap screw , portable temperature simulator 0-600 deg celcius , disc spring , release spring , gt2 coalescer filter panel , seal tape roll , barring gear assly - gali , type - gd , loctite 480 , crankcase pressure measurement assly , o ring , drilled cap plug - dn 12 , connecting straub metal grip d42 4 epdm , adjusting screw , injector tappet , gasket , injection pipe , o ring , p2-p4 by pass valve-gachot-dn125 , seal ring chord , expansion bellow , metallic gasket , cartridge , v band clamping , lub oil filling connection , rubber compensator , rubber compensator g0125 x 130 x 016 hks-g nbr gr deb , rubber compensator g0100 x 130 x 016 hks-g nbr gr deb , clamping collar , expansion bellows , metallic joint , o ring an 30 , 21a7 , gasket for lub oilcooler (nopv) , channel plate gasket , engine inlet thermostic valve , o ring , disc spring washer dia.56xdia.28.5x3 , disc spring washer dia.40xdia.21.5x2 , temperature sensor , silencer pads (fx4000) , lid seal for fx4000 , hex bolt , hex bolt , time delay relay(on delay) , elelctrical connnection laptop-engine controller , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , repair kit for gali starter , set of seal for gali starter , solenoid valve-24v , main bearing assly , gasket , gasket , o ring , gasket , seal , impeller , 2 lips oil seal , bearing , mechanical seal eagle , o ring , bearing , cap plug , injector sleeve , o rind- ms 29513/238 , v 75 e , o ring - kalrez , inlet valve guide , gasket exhaust manifod , valve seat metallic ring , inlet valve , exhaust valve , rocker arm bush , metallic joint , rocker cover screw , piston ring - top - chrome , ceramique , piston ring - compression-g3-chrome , piston , gasket , set of gasket for hyd. motor , connecting axiflex metal gripd168.3 , epdm , gasket , service tool kit for oil mist detector , exhaust temperature sensor , o ring - ms29513/230 , 60c7 , o ring an26 , 60c7 , nozzle assly -9 x 0.52 x 148 , helicoflex joint hn100 , d17.4 1.8mm , sea water pump , joint type c with limiter , metallic joint , tc speed sensor , gasket rc , o ring d54 , 50x3 v70d , o ring an29 , 21a7 , gasket , hose , metallic joint , set of spares for air valve and actuator , set of spares for p2/p4 bypass valve , actuator service kit , fresh water temp sensor (rtd) , coupling assly cw , connecting cable (unitel way) , analog input field module type 170aaio3000+slave 170fnt11001 , lamp , hooter (electronic) , power switch , fuse 10x38 2a gg , pt 100 converter with two threshold , solenoid valve-safety stop , power fuse , 32a , rsp bearing safety card , icm safety stop card (4 channel) , frequency preamplifier (engine speed) , human machine interface , main bearing temp probe , connecting rod bearing temp probe , washer bsf , ring for casing , bushing

CTN :45248283

22 Jun, 2026 5.00 Lacs

Dabra - Madhya Pradesh

Tender For purchase of moter starter panel repair all electricity material in nagar palika dabra

CTN :45142257

30 May, 2026 15.00 Lacs

Rewa - Madhya Pradesh

Tender For supply of jalpradya and pipe line material nagar prishad hanumana -isi gi pipes (surya/swastik/tata) – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi sockets – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi unions – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi tees – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi elbows – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi bends – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi nipples – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi reducer sockets – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi reducer elbows – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi reducer tees – 2 star rating: 50mm, 63mm 75mm, 90mm, 100mm flanges (2-hole pattern); 50mm, 63mm, 75mm, 90mm, 100mm pvc pipes (10 kg/cm² pressure rating); 3", 4", 6" c.i. bends; 3", 4", 6" c.i. reducer sockets; 3", 4", 6" c.i. reducer tees; 3", 4", 6" c.i. reducer bends; 3", 4", 6" c.i. air valves; 2", 3", 4", 6" c.i. non-return valves; gland packing cord, white lead (safeda), molten lead, jointing compound; heavy-duty plastic taps (1/2"); heavy-duty steel taps (1/2"); rubber rings (3", 4", 6", 8"); nuts & bolts (tvs company, all sizes); pvc tees (2", 2.5", 3", 4", 6"); pvc elbows (2", 2.5", 3", 4", 6"); pvc sockets (2", 2.5", 3", 4", 6"); pvc bends (2", 2.5", 3", 4", 6"); pvc reducer sockets (2", 2.5", 3", 4", 6"); pvc reducer tees (2", 2.5", 3", 4", 6"); pvc reducer bends (2"). 2.5, 3, 4, 6; clamps: 1-1/4, 1-1/2, 2, 2.5, 3, 4, 6; spindle rod (repair): 2, 2.5, 3, 4, 6; spindle rod with nut: 2, 2.5, 3, 4, 6, 8"; pipe wrench (taparia): 10, 12, 14, 18, 24; chain wrench (taparia): no. 36; spanner set (taparia): 4, 6, 8, 10, 12; t-wrench set (taparia); rubber packing; raw rubber; gate valve (isi brass): 1/2, 3/4, 1, 1.5, 2, 2.5, 3, 4; gate valve (c.i.): 1/2, 3/4, 1, 1.5, 2, 2.5, 3, 4; c.i. joint: 3, 4, 6, 8; c.i. sluice valve: 3, 4, 6, 8; c.i. tailpiece: 3, 4, 6, 8; c.i. bend (90 degrees): 3, 4, 6, 8; submersible pump (isi marked): 1 hp kirloskar/crompton (8-stage, 12-stage, 16-stage, 18-stage, 20-stage); 1.5 hp kirloskar/crompton (8-stage, 12-stage, 16-stage). stages: 18, 20 | 2 hp kirloskar/crompton | stages: 8, 12, 16, 18, 20 | 3 hp kirloskar/crompton (t6/t4) | stages: 12, 16, 18, 20 | 5 hp kirloskar/crompton (t6/t4) | stages: 8, 12, 16, 18, 20 | 6 hp kirloskar/crompton (t6/t4) | stages: 8, 12, 16, 18, 20 | 7.5 hp kirloskar/crompton (t6/t4) | stages: 8, 12, 16, 18, 20 | 10 hp kirloskar/crompton | stages: 8, 12, 16, 18, 20 | 15 hp kirloskar/crompton | stages: 8, 12, 16, 18, 20 | ltl panel board: 1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp bch starter ltl (1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); starter oil; sluice valve (2.5 inches, 3 inches, 4 inches, 6 inches, 8 inches, 10 inches); rubber packing; voltage meter (bch company: 1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); ammeter (bch company: 1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); c.i. d-joint (3", 4", 6", 8", 10"); heavy-duty chain pulley (5 ton); main switch ltl (3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); pvc. pipe wrap (tape) 1", 3/4"; elbows; couplers (sockets) for motor connection 1", 3/4"; vice (thin type) including nuts and bolts; rope 6mm, 8mm; saddle clamps for pipe connections: 315mm, 280mm, 250mm, 225mm, 200mm, 180mm, 160mm, 140mm, 125mm, 110mm; mdpe pipe 1/2"; ferrule 1/2"; nuts & bolts (size 13); tvs clamps 3", 4", 6", 8"; grinder machine; t-wrench 24x27; cutter machine; hammer drill machine; hammer; chisel; axe; hdpe pipe: 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 225mm, 250mm, 280mm, 315mm; hdpe tee: 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 225mm, 250mm, 280mm, 315mm; hdpe coupler (joint): 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 225mm, 250mm, 280mm, 315mm. reducers: 280/250 mm, 250/225 mm, 225/200 mm, 200/180 mm, 180/160 mm, 160/140 mm, 140/125 mm, 125/110 mm; bands: 110 mm, 125 mm, 140 mm, 160 mm, 180 mm, 200 mm, 225 mm, 250 mm, 280 mm, 315 mm;

CTN :45277811

11 Jun, 2026 49.14 Lacs

Ludhiana - Punjab

Tender For repair of sludge motor, purchase of generator sets, starter panel for basti jodhewal and bhagwan nagar disposals under sub zone b3.

CTN :45277816

11 Jun, 2026 46.80 Lacs

Ludhiana - Punjab

Tender For repair of sludge motor, purchase of generator sets, starter panel for mayapuri and shakti nagar disposals under sub zone b3.

Panel Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector