Web Analytics Made Easy - StatCounter

Pantograph Scrap Tenders

Get complete information related to latest Pantograph Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pantograph Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pantograph Scrap Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government / Public Sector

CTN :40027059 Due date: 28 Apr, 202528 Apr, 2025 NA
Tender For supply of stretcher bar insulation complete set as per spec. no. irs:s 23 & 40/84 or latest. one set co nsisting material of (1) insulating plate as per rdso drg. no. t-10367 =01 no. (2) insulation bush as per r dso drg. no. t-1036 8 = 02 nos. (3) insulated washer as per rdso drg. no. t-10371 =04 nos [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40025676 Due date: 25 Apr, 202525 Apr, 2025 NA
Tender For supply of 9900301655 vindhyachal procurement of spares or consumables - vindhyachal procurement of spares or consumables - m5121526930 - cone bush 91350801002 00 118 bhel gen , m5121526931 - cone bush 9135080100200119 bhel gen , m5121526952 - cone bush 91350801002 00 120 bhel gen , m5121526933 - spacer block 91350801002 00 121 bhel gen , m5121526934 - spacer block 91350801002 00 122 bhel gen , m5121517074 - o- ring 91350801002 123 bhel thdf 115 59 , m5121526935 - filling strip 91350801002 00 127 bhel , m5121526936 - thrd pin 9135080100200128 bhel gen 500mw , m5121526937 - glue 91350801002 00 130 bhel gen 500mw , m5121016713 - curing agent z 91350801002 00 132 bhel , m5121526938 - araldite 91350801002 00 134 bhel gen , m5121526939 - hardener 91350801002 00 135 bhel gen , m5121526940 - araldite 91350801002 00 138 bhel gen , m5121526941 - hr hv998 91350801002 00 139 bhel gen , m5121526942 - ins.enamel lck indct 91350801002 00 140 , m5121526953 - contact grease 91350801002 00 141 bhel , m4321503324 - silicon paste 01350801035sh3 142 bhel , m5121526954 - becktol varnish 91350801002 00 146 bhel , m5121526955 - epoxy resin cy205 91350801002 00 147 b , m5121526956 - calcite 91350801002 00 148 bhel , m5121526957 - powder.aerocil 380 91350801002 00 149 , m5121526958 - chr oxide grn 91350801002 00 150 bhel , m5121526959 - hardner hy840 91350801002 00 151 bhel , m5121526960 - chalk powder 91350801002 00 152 bhel gen , m5121526961 - epoxy lam.fab.sheet 91350801002 00 153 , m5121526962 - adhsiv pattex 91350801002 00 154 bhel , m5121526963 - loctite 222 01350801035 00 143 bhel gen , m5021256138 - fine mica glass tape 1350801003var 00 90 , m5121526964 - conductive varnish 91350701000 00 56 , m5121526965 - semi conducting varn 913507010000059 , m5121526966 - grph powder 91350701000 00 60 bhel gen , m5121526967 - resin e8702 9135070100000 61 bhel , m5121526969 - curing agent z 9135070100000 62 bhel , m5121526970 - insulating tape 9135070100000 67 bhel , m5121526971 - slot wrapper 9135070100000 68 bhel , m5121526972 - cr cotton tape emtmisc00 46 bhel , m5021266247 - toluene industrial tgemis1 00 402 bhel , m5121016658 - resin cy-205 bhel generator-500 mw , m5121526973 - orthoxylene emtmisc00 71 bhel , m5021500081 - wtrprf adhesive tape emtmisc00 67 bhel , m5121526974 - poly adhesive tape tgemis00 930 bhel , m5121526975 - barrier cream emtmisc00 410 bhel , m4121041016 - water emery paper bhel thri 108 44 , m5121526920 - trichloroethylene emtmisc00 127 bhel , m5121526976 - cap emtmisc00 138 bhel , m5021026128 - methyl ethyl ketone emtmisc var-00 , m5121036120 - araldite cy 205 turbo generator , m5021266114 - hardener hy840 tgemis 1 0076 bhel , m5021026080 - micaflakes micanite stator core repair , m5021266045 - enamel red ie-82 tgemis1 00 341 bhel , m5121517027 - insulation cover 91350801002 76 bhel , m5121517029 - end plate 91350801002 78 bhel , m5121517008 - spacer 91350801002 57 bhel , m5121517030 - side plate 91350801002 79 bhel , m5121517031 - middle plate 91350801002 80 bhel , m5121517043 - locking shoe 91350801002 92 bhel , m5121016714 - generator assy 91350801002 131 bhel , m5121517062 - bolt 91350801002 111 bhel thdf 115 59 , m5021266106 - ep bid details/ 2 / 73 lam sheet tgemis 1 00 499 bhel 210mw , m5121016715 - fine mica powder 91350801002 133 , m5121526968 - glass tape 91350701 20 0 08 20 bhel , m5121516978 - packing strip 91350801002 27 bhel , m5121516979 - spacer 91350801002 28 bhel thdf 115 59 , m5121516980 - packing strip 91350801002 29 bhel , m5121516981 - packing strip 91350801002 30 bhel , m5121516982 - packing strip 91350801002 31 bhel , m5121516983 - top ripple spring 91350801002 32 bhel , m5121516984 - wedge 91350801002 33 bhel thdf 115 59 , m5121516985 - end wedge 91350801002 34 bhel , m5121516987 - slot ripple spring 91350801002 36 bhel , m5121516986n - slot ripple spring bhel , m5121026443 - tension disc 9135080100200110 bhel , m5121517068 - washer 91350801002 117 bhel thdf 115 59 , m8228490036 - poltester resin rope 9135

CTN :40000284 Due date: 05 May, 202505 May, 2025 50.00 Lacs
Tender For annual rate contract for supply of line materials and material for repairs of distribution transformers at electric division handwara for the year 2025-26 - supply of dpc aluminium wire (round) in sizes 12 to 20 swg conforming to ie 7404, supply of dpc aluminium strip of sizes for lv winding of distribution transformers 25 kva to 400 kva, supply of se aluminium winding wire ( round) in sizes 12 to 20 swg, supply of dpc aluminium wire (round) in sizes 12 to 20 swg (in exchange of one kg of srap of salvaged conductor), supply of dpc aluminium strip of sizes for lv winding of distribution transformers 25 kva to 400 kva (in exchange of one kg of srap of salvaged conductor), supply of se aluminium winding wire ( round) in sizes 12 to 20 swg (in exchange of one kg of srap of salvaged conductor), supply of lv brass bush rods 12 mm2 complete with bush collars, bush washers,nuts and bolts of identical matter, rubber oil seals and ring washers., supply of lv brass bush rods 19 mm2 complete with bush collars, bush washers,nuts and bolts of identical matter, rubber oil seals and ring washers., supply of ht brass bush rods 12 mm2 complete with bush collars, bush washers,nuts and bolts of identical matter, rubber oil seals and ring washers., supply of press card board sheet (4x4) soft calendared solid 1mm/2mm/3mm (raman make), supply of ht insulating gum, supply of glass sleeves of size 1m long,4 to 14 mm, supply of lethoride paper 8 to 12 mil, supply of ht paper 1.5/2/2.5 mil, supply of lv bushes 250 amp, supply of lv bushes 650 amp, supply of cotton tape 1 wide vector brand, supply of rubberized cork sheet oil resistant of size 4mm thick, 2ft x 3ft long (nucork/televrass make), supply of lv cork washers of size 12 mm dia, supply of lv cork washers of size 20/25/30/40 mm dia, supply of hv cork washers 110mm od, supply of oil seal ring (o-ring) for lv/hv bush rods 12 mm dia, supply of oil seal ring (o-ring) for lv/hv bush rods 20 mm dia, supply of transformer oil as per is-335 of 1993 with latest ammendents uptodate. (servo/power oil/apara etc), supply of aluminium thimbles of size 185 sqmm as per relevant is, supply of aluminium thimbles of size 300 sqmm as per relevant is, supply of backlite tube 1m long,16/20 mm dia, supply of spanners sets of all sorts and screw drives of all sorts, supply of oven heating rods, supply of old saries /cotton waste/dhoti cloth, supply of fabricated galvanized v-cross arm channel iron (75*40*40*6) mm for 11kv inluding back clamps of flat iron 50*6 mm for fixing of v-cross arm and gi angle iron pole top bracket 50*50*6 mm (400mm long) with galvanized welded plate of flat iron 50*6 mm along with double clamps complete assembly as per rec specification., supply of fabricated galvanized iron channels for sub-stations as per rec specification., supply of 11 kv disc insulators polymer type with fitting 45kn as per rec standard., supply of 11 kv pin insulators polymer type with gi pins 5kn as per rec standard., supply of 11 kv pin insulators porclein type with gi pins 5kn as per rec standard., supply of mukhi clamps as per rec standard., supply of lt shackle insulators 16kn as per rec standard., supply of fabricated galvanized nuts and bolts as per rec standard.

CTN :39948783 Due date: 14 Apr, 202514 Apr, 2025 NA
Tender For supply of insulating bush for cgr of n32 tap chang etc.

Central Government/Public Sector

CTN :39915601 Due date: 22 Apr, 202522 Apr, 2025 NA
Tender For supply of set of insulating bush 08x10.00 high insulation hard epoxy fibre for temperature sensor asse mbly of traction motor type 6fra6068. as per clw drg. no- 4twd.096.163, alt-4 or latest ref.-03. each se t consisting of 01 item 02 nos only. [ warranty period: 30 months after the date of delivery ]

CTN :39899301 Due date: 18 Apr, 202518 Apr, 2025 2.00 Lacs
Tender For supply of line workshop material item wise as and when required during the financial year 2025-26. - electrical store/workshop items/: as per is standards, bush rods 12mm(lt) of standard make, bush rods 19mm(lt) of standard make, bush rods 25mm(lt) of standard make, bush rods 30mm(lt) of standard make, ht bush for dts of standard make, lt bush set for 250kva dt of standard make, lt bush set for 63kva dt of standard make, lt bush set for 100kva of standard make, pp rope of sizes, aluminum thimbles 95/120sqmm of standard make, aluminum thimbles 185sqmm of standard make, aluminum thimbles 240sqmm of standard make, aluminum thimbles 300sqmm of standard make, plastic meter seals, soldress clamp for 400kva of standard make, soldress clamp for 250kva of standard make, soldress clamp for 100kva & 63kva, gi channel/angle/flat of sizes including clamps, gi v cross-arm with top bracket including clamp(2 nos), 11 kv gapless surge arrestor,9 kv ,10 ka ,la with polymer housing, stn. type, 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, 11 kv horn gap fuse set 3 phase 200a, 11 kv heavy duty link set (polymer) line type with 6mm copper blade and 02 no. 8ft. gi channel, clamps and nuts and bolts, 11 kv pin insulators (polymer/porcelain) with pins(5kn), 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, lt shackle with mukhi clamps including gi nuts & bolts, rechargeable 5w emergency search light, high power with 3000mah lithium battery, and an ergonomic design, gi nuts & bolts of sizes with full thread, manilla rope, gi wire 8swg, suspension/tension clamp with eye hook, insulating piercing connector (10-95sqmm), straight through cable jointing kit for 50sqmm ltab, straight through cable jointing kit for 120sqmm ltab, heat shrinkable outdoor cable termination kit, 50sqmm ltab cable (3x50+1x16+1x35) sqmm xlpe (1.1kv, 3+1c, al), 35 mm ab (ht) cable (3x35+1x35 mm ) xlpe, led fancy decoration mala light (12m long) (orange+white+green), dpc aluminium of sizes 13/14/16/18swg of standard make, super enamelled(se) of sizes 13/14/16/18/21swg of standard make, lathoride paper 10 mil of standard make, exchange of 1kg fresh al dpc by scrap dpc, exchane of 1 kg fresh bush rods by scrap bush rods, lathoride paper 20 mil of standard make, ht paper 3 mil of standard make, hard card board 1/1.5/2/3mm of standard make, fiber tubes of standard make, cotton tape/ nawar of standard make, cork washers (32x12)5mm, cork washers (50x28)5mm, cork washers (110x74)5mm, cork washers (45x20)5mm, cork washers (60x32)5mm, cork washers (70x45)5mm, cork washers (90x50)5mm, cork sheets(24x36) 3 mm, cork sheets(24x36) 4mm, cork sheets(24x36) 5mm, cork strip(40x3) mm, cork strip(40x5) mm, oil seals for 250kva of standard make, oil seals for 100kva & 63kva of standard make, m seal, cotton tap 1" size (length 35 meter), nawar tap 1 size 35 meter long, tap roll pvc, old saree/doti cloth, insulating gum of standard make, aluminum strip of sizes (3/6, 3/7, 4/8, 4/10 mm etc ) of standard make, rubberized cork sheet 4mm thick, 2 feet *3 feet, rubberized cork sheet 3mm thick, 2 feet *3 feet, ht brown paper 3.0/2.5 mil, packing sheet (1mm)press card board 1/2/3mm, synthetic enamel paint grey colour, varnish dr.beck/empire, glass wool sleeves of sizes, fevicol, backlite tubes 1/2 inch,(1mtr length), packing gutties, electrical grade kraft paper,4mil, rubber washers ( m-12 ht oil seal),, rubber washers ( m-12 lt oil seal),, rubber washers ( m-16 lt oil seal),, rubber washers ( m-20 lt oil seal),, rubber washers ( m-25 lt oil seal),, rubber washers ( m-30 lt oil seal),, fiber glass sleeves 2mm, fiber glass sleeves 3mm, fiber glass sleeves 4mm, fiber glass sleeves 5mm, fiber glass sleeves 6mm, fiber glass sleeves 8mm, fiber glass sleeves 10mm, fiber glass sleeves 12mm, fiber glass sleeves 15mm, oxygen cylinder for welding with water capacity of 47 ltrs and gas capacity of 7 c

CTN :39907896 Due date: 24 Apr, 202524 Apr, 2025 10.00 Lacs
Tender For rate contract for supply of materials for repair of distribution transformers at electrical workshop for the year 2025-26 - supply of :, dpc copper winding wire (round) in sizes 11 to 22 swg-fresh, dpc copper strip of sizes for lv winding of distribution transformers 25 kva to 630 kva-fresh, se copper winding wire (round) in sizes 11 to 22 swg-fresh, dpc aluminium winding wire (round) in sizes from 12 to 20 swg-fresh, dpc aluminium strip of sizes for lv winding of distribution transformers 25 kva to 630 kva - fresh, se aluminium winding wire (round) in sizes 12 to 20 swg-fresh, dpc copper winding wire (round) in sizes 12 to 20 swg ( in exchange of one kg of scrap of salvaged conductor), dpc copper strip of sizes for lv winding of distribution transformers 25 kva to 630 kva( in exchange of one kg of scrap of salvaged conductor), se copper winding wire (round) in sizes 11 to 22 swg ( in exchange of one kg of scrap of salvaged conductor), dpc aluminium winding wire (round) in sizes from 12 to 20 swg ( in exchange of one kg of scrap of salvaged conductor), dpc aluminium strip of sizes for lv winding of distribution transformers 25 kva to 630 kva ( in exchange of one kg of scrap of salvaged conductor), se aluminium winding wire (round) in sizes 12 to 20 swg ( in exchange of one kg of scrap of salvaged conductor), lv brass bush rods 12 mm, lv brass bush rods 20 mm, lv brass bush rods 25 mm, lv brass bush rods 32 mm, press card board soft calendared solid 1mm/2mm/3mm(as per sample), press card board pre compressed solid 1mm/2mm/3mm., press card board gatti, ht insulating gum, glass wool sleeves of sizes, aluminium brazing rod ( standard length), copper brazing rod (standard length), flexible copper strip (shim) 75mm x 0.5 mm, pvc sheets 1 mm thick, empire tape 1, electrical grade kraft paper, 4 mil, lethoride paper 20 mil., hv bushing, lv bushes 250 amp, lv bushes 630 amp, lv bushes 1000 amp, cotton tape 1 (size) 35 m long., nawara tape 1 (size) 35 m long., rubberized cork sheet 4 mm thick 2ftx3ft, rubberized cork sheet 3mm thick 2ftx3ft, bakelite tubes 12mm dia ( 1 mtr long), hv bush clamps (ms), aluminium clamping member (shoes) for hv bushing, lv cork washers 12 mm dia for 100 kva bush with cup, lv cork washers 20mm dia 250 kva bush with cup, lv cork washers 25 mm/30 mm dia 630 kva bush with cup, nuts & bolts (m.s) of sizes., m.s flat washers., hv cork washers 110 mm o.d, aluminium welding flux, aluminium flat 4/6/8/10 mm thick of required, copper flat 4/6/8/10 mm thick of required width., ms plug & caps 1/2 ; 3/4; /1; 1.1/4; 1.1/2, oil seal rings (o-rings) for lv/hvbush rods 12 mm dia., oil seal rings (o.rings) for lv/hv bush rods 20 mm dia, oil seal rings (o.rings) for lv/hv bush rods 25 mm dia, creep tape 1, cotton cloth, m4 grade crgo silicon steel core laminations/stampings duly insulation coated. of required size as per sample, empire sleeves of sizes, synthetic enamel paint smoke grey colour, paint thinner, steel primer, silica gel, transformer oil(servo/power oil), welding rods 3.15 mm/4mm., refilling of oxygen gas for breezing, meggar 500 v 200 mega ohms, 9 v battery, drill bit of sizes, hook on meter, plair 6", wire cutter, refilling of lpg gas for breezing

CTN :39897054 Due date: 23 Apr, 202523 Apr, 2025 NA
Tender For supply of wiring harness ca no 3 - qbraiding single core _0_5 sq mm , electrical cable _copper multi conductor tin coated_ptfe insulated with screened single core_0_5 sq mm , electrical cable _copper multi conductor tin coated _film and pvc insulated flexible hookup wire single core_0_5 sq mm_specn_437 , electrical cable copper conductor cotton and pvc insulated_single core scd 6sq mm 911 , electrical cable copper conductor fibrous and pvc insulated _single core scd 0_75sq mm 911 , electrical cable copper conductor fibrous and pvc insulated _single core scd 1_5sq mm 911 , electrical cable copper conductor fibrous and pvc insulated flexible hookup wire_single core , electrical cable copper conductor fibrous and pvc insulated flexible hookup wire_single core scd , electrical cable copper conductor cotton pvc insulated _single core 0_5sq mm 911 , electrical cable_ copper multi conductor tin coated_ plasticized pc v , electrical cable_ copper multi conductor tin coated_ plasticized single core_1_5sq mm 911 scd , electrical cable_ copper multi conductor tin coated_ plasticized pc v core_2_5 sq mm_ spec_ 911_scd , insulating p v c sleeve black__6 mm dia , insulating p v c sleeve white_20 mm dia , insulating p v c sleeve white_10 mm dia , insulating p v c sleeve white_2 mm dia , insulating p v c sleeve white_3 mm dia , insulating p v c sleeve white_3_5 mm dia , insulating pvc sleeve white _5mm dia , insulating pvc sleeve white_14 mm dia , insulating pvc sleeve white_2_5mm dia , insulating pvc sleeve white_20mm dia , insulating pvc sleeve white_28mm dia , insulating pvc sleeve white_6mm dia , insulating pvc sleeve white_8mm dia , insulation tape pvc black _18mm width , iso prophyl alcohol __ ipa_ , locking wire _0_5mm dia , nylon thread white _0_5mm dia , nylon thread white_1 mm dia , palstic cover 80 microns _18_x24_ , permanent marker pen black _fabe rcastle 1523 , potting compound _ana bond 900 , protective conical spring braid_as per drg no a4 _51568 , protective spring braid _as per drg no a__ 51569 , protective spring braid _as per drg no a4 51570 , rubber tube 0_650 mm long _30mm id x 4mm thick , rubber tube 750 mm long black_25 mm id x3_5mm thick , rubber tube black 0_65 long _0_5mm idx1_4mm thick , solder flux _ , solder soft 16 swg _gde _f_ , solider soft 16s w g_sn_63 percent _pb_37 percent , surgical tape _20mm width aluminium alloy connecter with olive drab chromate over cadmium plate with copper bush,and protective cap_s h 16 u 2esh5,jss-50860,asper sample, aluminium alloy connecter with olive drab chromate over cadmium plate with copper bush,and protective cap_shr 16 p2 esh5 jss;50860,as per sample, aluminium alloy connecter with olive drab chromate over cadmium plate with copper bush,and protective cap_shr 32p 12esh1jss:50860 as persample, aluminium alloy connecter with olive drab chromate over cadmium plate with copper bush,and protective cap_shr 36p15 esh5,jss:50860, as persample, aluminium alloy connecter with olive drab chromate over cadmium plate with copper bush,and protective cap_2rm22 kpe 4g3v1. jss:50860, as persample, aluminium alloy connector with olive drab chromate over cadmium plate with copper bush and protective cap _2rm 27kpe 24g1v1 jss:50813 as per sample& drg, aluminium alloy connector with olive drab chromate over cadmium plate with copper bush and protective cap _shr 16 pk 2esh5 jss: 50813 as per sample & drg, aluminium alloy connector with olive drab chromate over cadmium plate with copper bush and protective cap _shr 20p 2eg6 bid details/ 2 / 59

Central Government / Public Sector

CTN :39860949 Due date: 17 Apr, 202517 Apr, 2025 NA
Tender For supply of set of items for axle box brush holder primary return current. set consists of 3 items. 1) spring clip (pressure device) for axle box carbon brush of 3 phase locos as per ref.2 of sheet no. 8 of clw spec. no.clw/es/3/0017, alt-d or latest qty-12 nos. 2) insulating bush small for earth return brus h with brush holder assly., as per clw spec. no. clw/es/3/0017 alt-d or latest ref. item no. 03 of she et no.08, qty - 40 nos. 3) insulating bush large for earth return brush with brush holder assly., clw sp ec. no. clw/es/3/0017 alt-d or latest ref. item. no.04 of sheet no. 08, qty-40 nos. [ warranty perio d: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39837448 Due date: 15 Apr, 202515 Apr, 2025 NA
Tender For supply of insulating bush for cgr as per anantashree part no: g2502 or repl part no : s2502.
 Loading, Please wait...

Connect us via What's Up