Latest par lamp Tenders | Government par lamp Tenders

Central Government / Public Sector

CTN :45736003

06 Jul, 2026 NA

Secunderabad - Telangana

Tender For industrial safety helmet with lamp of size 540mm, yellow colour, brand steopon or equivalent as per annexure-a. note: one sample to be got approved before bulk supply [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45702242

07 Jul, 2026 17.03 Lacs

Kota - Rajasthan

Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

State Government

CTN :45738086

10 Jul, 2026 NA

Azamgarh - Uttar Pradesh

Tender For providing of hiring of boats - quick response vehicle (qrv) boat; less than 5 years; without air-conditioning; 20-25; 60; inboard; fibre-reinforced plastic; repair kit, rescue life jackets, lifebuoys, fire extinguisher, first aid box, safety hand lamp; service pr..

CTN :45711090

03 Jul, 2026 NA

Parganas - West Bengal

Tender For spare parts of scania - connector 1/4" part no 140523, oil collector part no 257319, hand brake valve part no 249914, switch, foot dipper part no 159656, stop light switch part no 158717, t-connector part no 229020, air dryer part no 258985, charging valve part no 215619, elbow connector part no 146235, elbow connector part no 229704, pressure regul. valve part no 5360042991(230787), safety valve part no 293542, valve seat part no 229358, repair kit part no 263664, repair kit part no 263667, bumper part no 249727, stop part no 217280, contact holder part no 235650, sliding contact part no 130770, cap lower part part no 1102372, cap upper part part no 1102371, oil container part no 197804, hydraulic oil pump part no 259310, relay part no 371912, comp circuit part no 259240, relay part no 173554, block terminal part no 353489, socket part no 255080, starting socket part no 231631, battery main switch part no 197811, gear selector (gear box) part no 6695000734(393779), gear selector (transfer box) part no 5895022571(393777), tandom driving cable part no 1149732, bulb 2w/24v part no 258491, panel, switches part no 248821, panel, control lamps part no 248820, map reading lamp part no 218412, control lamp oil pressure part no 239170, control lamp full beam part no 239173, light filter part no 246680, control lamp (direct indicator i) part no 239174, control lamp (gear box oil temp) part no 255073, control lamp coolant temp part no 246856, control lamp (reversing light) part no 249300, plate, blackout lighting part no 391567, techometer part no 258660, comb instrument part no 268353, oil pressure gauge part no 259794, water temp gauge part no 249108, fuel gauge part no 249109

CTN :44978519

06 Jul, 2026 NA

Goindwal - Punjab

Tender For corrigendum : procurement of “building spares and outdoor supply source. - geyser assembly 6-hole, supply voltage-250v ac required for, 25 litre capacity geysersmake: crompton, geyser coil 2kw, geyser coil, 2 kw, 230 vac, 25 ltrs capacity, thermostat for geyser type-9-inch length, supply voltage-250v ac required for, 25 litre capacity geysersmake: crompton, electric geyser neon indicator light red, 240v ac red indicator light pilot lamp, neon bulb, electric geyser neon indicator light green, 240v ac green indicator light pilot lamp, neon bulb, gyser model: ap-25v, cap:25ltrs, racold,crompton arno neo 25-l 5 star rated storage water heater (geyser) with advanced 3 level safetybrand cromptoncapacity 25 litres power source corded electricproduct dimensions 337.5w x 54.2h cmspecial feature auto restart, fast heating, geyser safety valve, for, 25 litre capacity geysers, make: crompton., cut out relay for geyser- type 9-inch, supply voltage-250v ac required for, 25 litre capacity geysers, make: crompton, ceiling fan, with copper winding coilnumber of blades-3, power consumption-52w, motor speed-380 rpm, design type-economy, type-ceiling fan, bee star rating-1, body material-aluminium, colour-white, 2 years company warranty, make-havells, crompton, bajaj, usha., portable type extension cable reel, without cable, portable i.e. lift & carryextension cable reel, heavy gaugetubular frame, sheet steel roller and al. discs with 2nos. m/c outletsocket 20a 3pin. reel capable of loading 50mtrs. 3core x 2.5mm.sq.pvc/pvc round sheathed flexible cable. (without cable)., power extension board - rating -15 amp, single phase extension board with 4core 2.5 sq.mm pvc insulated flexible cable (30 meter)component to be included in the board as bellow:1. 25a 2-pole mcb and 25a 2-pole rccb at incoming.3. 01 no s 1 phase 15a industrial socket with plug top and individual switch circuit4. 03 no s 1 phase 15a socket with individual switch circuit, industrial type extension box, fabricated from 16swg crcasheet of size 350mm x 250mm x 250mm. tower type powdercoated in deep orange shade gasketed doors conforming toip 55 and with the following components duly wired: -incomer: mcb and indication lampoutgoing: 4 no s f 10a socket & plug top each individuallycontrolled by a 10a dp rotary switch.

CTN :45693900

10 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply and installation of automobile trainers and equipment at consignee locations. (tender ref no.26008/2026-27) - light motor vehicle driving simulator, injector -multi hole type, pintle type, petrol engine - 2 stroke, motor cycle/ scooter, injector cleaning unit, injector testing set (hand tester), fuel feed pump for diesel, fuel injection pump - diesel - inline, fuel injection pump - dismantling tool kit, fuel injection pump - distributor fuel rotary pump with standard accessories, fuel injection pump - ve pump with standard accessories, cylinder liner- dry & wet liner, cylinder liner - press fit & slide fit, steering assembly - rack and pinion, air brake trainer assembly, alternator assembly - lmv, engine bearing model set, piston model set, front axle assembly, rzeeppa joint with stand for dismantling and assembly, full floating axle and semi floating axle assembly, wiper motor assembly, cut section model - 4 cylinder diesel engine, cut section model - automatic transmission gear box, cut section model - centrifugal clutch assembly, cut section model - diaphragm clutch assembly, cut section model - radiator - cross flow, cut section model - radiator - down flow, cut section model - shock absorbers, cut section model - single plate clutch assembly, cut section model - turbocharger, demonstration board - anti theft device car, automotive safety air bag simulator, car air conditioner trainer, demonstration board - crdi system, demonstration board - electronic ignition system and ignition coil, disk brake trainer, drum brake trainer, working model - power windows, working model - torque converter, denting kit set, engine compression tester (diesel), two post car lift- capacity 4 ton, electric operated, radiator pressure tester, tyre changer machine, tyre air pressure gauge with holding nipple, wheel alignment machince computerized 3d, wheel balancing machine (for wheel balancing of lmv), air conditioning service unit - car, automotive battery charger, automotive battery tester/ analyser, battery terminal cleaner tool, air blow gun, air impact wrench with impact sockets, engineers stethoscope, grease gun - 500 grams, oil can 500 ml, oil filter wrench - upto 500 mm, piston ring compressor - 50 - 100 mm, piston ring expander and remover - 50 - 100 mm, piston ring groove cleaner, belt tensioner gauge, car jet washer with standard accessories, auto electrical work bench, gloves: rubber, gloves: cotton, industrial/ safety shoes, industrial helmet, blow lamp: 0.5 liter, magnifying glass: 75 mm, lifting tackle/ sling: 1 ton, 2 meters, laser distance measuring instrument, demonstration board: electric vehicle cooling system, engine and transmission system for electric vehicle, cut section of electric vehicle motors, hvac trainer, electric vehicle service equipment test adapter kit, battery tester with inbuilt printer, lighting and wiring system for electric vehicle, electric vehicle diagnostic scanner, solar based charging system, electric vehicle tool kit, electrically insulating blanket, clamps for insulating blanket, insulated rubber mats, gloves: electrically insulated, industrial/ safety shoes: electrically insulated, glove inflator kit, goggle: white glass, ac current digital clamp meter, digital continuity tester, soldering iron set: mechanic electric vehicle

State Government

CTN :45711999

07 Jul, 2026 NA

Banda - Uttar Pradesh

Tender For providing of hiring of boats - quick response vehicle (qrv) boat; less than 5 years; without air-conditioning; 10-20:30; 100; inboard; fibre-reinforced plastic; repair kit, rescue life jackets, first aid box, safety hand lamp; service provider

Central Government/Public Sector

CTN :45716158

09 Jul, 2026 1.86 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For supply of cleaner white toilet , duster cloth a , cloth sponge 18 cm x 20 cm , cotton waste , polish metal brass , feather broom , broom country , brush sweeping hand soft broom , super mop refills , super mop , glass cleaner 500ml , room freshener , dust bin with cover combined , rags cotton coloured , detergent powder in 1 kg pack isi mark , soap liquid toilet , hand wash liquid , disinfectant fluid white black phenoil , cleaning bar for utensils , cleaning bar for utensils vim 500 gm pack , refill for automatic air freshener 250 ml pack , rat sticking gel , spray hand liquid insecticide , nmcl solution teepol qty for 06 months , nmcl solution phosphoric acid qty for 06 months , nmcl solution oxlic acid qty for 06 months , nmcl solution thiourec qty for 06 months , distilled water , napthlene balls , plastic mugs , paint roller 9 inch , clip jubliee 3 5 to 4 8x7 8 , brown sheet laminated , paint roller 4 inch , paint roller 7 , distemper white isi mark , roller paint 6 inch , paint brush 4 inch , paint brush 2 inch , photocopier paper size 210 x 297 mm a4 80 gsm , tape transparent 2 inch , wonder tape 2 , wet surface putty , m seal , candle wax dia 19 mm , anti rust spray , tape transparent 1 inch , toilet paper , tape insulation 25 mm steel grip isi mark , xerox paper 80 gsm 420x297 mm a3 , brush with long handle , scrubber with handle , alkaline battery aa 1 5v lr- 6 , synthetic foot mat 3 x 2 feet , scrubber pad 3 x 4 , varnish , bag gunny 27 x 21 , aqua bond putty , cement rapid hardening quick dry cement , cfl lamp , fiber duster brush , hand towel , wiper long handle , steel cleaning liquid , envelope size 4 inch x 10 inch , photocopier paper size 210 x 325 mm f s , mosquito repellent machine with liquid , bags biodegradable for garbbage , deodoriser odonil , pest seal , paper napkin , dvd , envelope cloth coated size 12 x 16 inch , envelope cloth coated size 10 x 14 inch , envelope cloth coated size 9 x 12 inch , envelope cloth size 10 x 14 inch , envelope size 6 x 12 inch , tape roll seal teflon thread of 12 mtrs length , safety glasses goggles , anti cockroach gel , jerry can 20 ltrs , bio gradeable polythene film length 112 width 18 , can plastic 10 ltrs capacity , clip jumblee 3 5 to 41 by 8 , clip jumblee 2 , bucket plastic 20 ltrs capacity , bucket plastic 15 ltrs capacity , boric acid , bleaching powder stablised , lint free baniyan clothes , dry chemical powder 5kg pack , oil and grease remover , emery cloth abrasive 11x9 279 mm x 227 mm , cloth coated pvc , cloth calico grey 36 wide , cloth calico red 36 width , linseed oil boiled , gloves leather , emery cloth abrasive cloth grip 36 , twine sewing fine , thinner , rope polypropylene 08 mm isi mark , rope polypropylene 06 mm isi mark , rope polypropylene 04 mm isi mark , rope polypropylene 20 mm isi mark , soap har yellow , paint brush 3 , paint brush 1 2 , paint brush 1 , automatic air freshener , chain ni silver for call boatwains , call boatswain , fender coitr turk head , tray paint roller //bid details 2 / 77

Central Government/Public Sector

CTN :45712962

08 Jul, 2026 1.40 Lacs

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of jerry can 20 ltrs , hand sanitizer , air freshener or air pocket 10 in no pkt , tube florescent or led or cfl , lamp cfl or led 20 watt , corrosion inhibitor 750 ml , can plastic 10 ltr capacity , varnish , polythene film length 112 width 18 thk 0.007 , bag gunny 27 x 21 , paint finishing for inter deck white , paint rfu priming red lead , paint coal tar epoxy black , paint remover non-inflammable , rope polypropylene 16 mm isi mark , emery cloth abrasive 11 x 9 is grit 36 , cloth terry flex cotton 36 width , cloth flanet 4 by 2 , cloth coated pvc 102cm wide , roller paint 6 inch , gloves leather v , emery cloth abrasive cloth is grit 36 , detergent solution , bleaching powder stabilised , dry chemical powder 05 kg pack , battery charger with connecting lead ma4234 for sse , grease lg 200 , aluminium telescopic baton size 3 mtr , clip jubilee 3.5 , jubilee clip 1 and half inch , twine sewing plastic , super mop , sand paper , safety glasses or goggles , o ring cord 7mm , ear plugs , anti corrosive compound 750 ml pack , instant glue 1 ltr pack * /bid number : gem/2026/b/7717654 + /dated: 27-06-2026 ' ' / bid document 1 / 28

State Government

CTN :45705163

06 Jul, 2026 NA

Panipat - Haryana

Tender For supply of safety shoes - leather with pvc sole (q3) , thermal gloves as per defence specification (q3) , tool bag (q3) , welding electrode - covered arc welding electrode - basic type (beml) (q3) , rechargeable led head torch (head lamp) (q3)

Par Lamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government