Latest parallel key Tenders | Government parallel key Tenders

Central Government/Public Sector

CTN :45063266

12 May, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of parallel key (hw-277.01) -- fully m/cd item as per drg. 31050124007 rev. 01 with matl. hw10683 rev. 03 , fitted key l= 268 (hw-399.115) -- item as per drg. 41062556004 rev. 00 with matl. hw10683 rev. 03

Central Government / Public Sector

CTN :45057596

11 May, 2026 NA

Jagatsinghapur - Odisha

Tender For tender for supply of brng bracket p n 330 , gskt for imp. fixing p n 400.03 , gskt for imp. fixing p n 400.04 , gskt for brg.cover p n 400.01 , hex head screw p n 901.37 , brng end cover p n361 , socket head cap screw p n 914.01 , bearing cover p n 360.01 , oil level sight glass p n 642 , vent plug p n 913.03 , screw plug p n 903.46 , plug 45c8 p n 903.11 , impeller p n 230.01 , spacer sleeve p n 504.01 , parallel key p n 940.01 , parallel key p n 940.02 , parallel key p n 940.03 , parallel key p n 940.04 , parallel key p n 940.05 , shaft p n 210 , imp. full dia p n 230 , plug p n 903.11 , key coupling p n 940.02 , imp. full dia p n 230 , gskt for imp.fixing p n 400.02 , gskt for brg.cover p n 400.01 , o ring for brg.end cover p n 412.22 , shaft p n 210 , key coupling p n 940.02 , key impeller p n 940.01 , shaft 210 , impeller 2st 230.02 , spacer sleeve 525.01 , casing wrg ring 502.02 , imp wrg ring 503.01 , imp wrg ring 503.02 , brg cover 360.01 , brg cover 360.02 , brg end cover 361 , neck bush 456.01 , key 940.02 , lock nut 920.03 , locknut 920.05 , brg bracket 330.1 , brg bracket330.02 , lock washer 931.01 , oil level s g 626.01 , gskt 400.01

Central Government / Public Sector

CTN :44708477

19 May, 2026 NA

Digboi - Assam

Tender For corrigendum : procurement of spares of ipco steel belt system of wpu - sld bar wt gap,pn:36272,rotoform 4g,ipco, slide bar right,pn:8445,rotoform 4g,ipco, slide bar left,pn:8444,rotoform 4g,ipco, slide bar trans,pn:6468,rotoform 4g,ipco, slide bar tran,pn:64762,rotoform 4g,ipco, plgh bar lng,p/n:025989,rotoform 4g,ipco, plgh bar shrt,pn:025988,rotoform 4g,ipco, safety scrapr,pn:006533,rotoform 4g,ipco, scraper blade,pn:006535,rotoform 4g,ipco, drv ply clnr,p/n:048126,rotoform 4g,ipco, tnsn ply clnr,pn:055660,rotoform 4g,ipco, ply clnr blade,pn:60818,rotoform 4g,ipco, water squeege,pn:048295,rotoform 4g,ipco, lamella,p/n:006539,rotoform 4g,ipco, brush,p/n:009754,rotoform 4g,ipco, sprt rlr rng,pn:010027,rotoform 4g,ipco, snapholder,p/n:005034,rotoform 4g,ipco, pull spring right,p/n-g-bt-002882, tensionspring left,p/n-g-bt-002854, take up brng,p/n:028117,rotoform 4g,ipco, fxd brng drv,p/n:028812,rotoform 4g,ipco, spray nozzle,p/n:025983,rotoform 4g,ipco, mounting clip,pn:019435,rotoform 4g,ipco, discrg knife,p/n:027285,rotoform 4g,ipco, bolt,p/n-g-bt-004385, sealing ring,p/n-g-bt-004833, sckt cap scrw,pn:005495,rotoform 4g,ipco, parallel pin,p/n:039821,rotoform 4g,ipco, parallel key,p/n:008667,rotoform 4g,ipco, sliding pad,p/n-g-bt-002360, countersunk screw,p/n-g-dn-005322, o ring,p/n:053408,rotoform 4g,ipco, o-ring,p/n:010754,rotoform 4g,ipco, prdiv nzl asy,pn:045582,rotoform 4g,ipco, brng housing,p/n:023552,rotoform 4g,ipco, berng housing,pn:023553,rotoform 4g,ipco, mounting ring,pn:022668,rotoform 4g,ipco, chain wheel, pno:g-bt-022674, brng housing,p/n:023573,rotoform 4g,ipco, brng housing,p/n:023555,rotoform 4g,ipco, sealing strip,pn:004517,rotoform 4g,ipco, chain wheel,p/n:005560,rotoform 4g,ipco, chain wheel,p/n:063336,rotoform 4g,ipco, chain wheel,p/n:042739,rotoform 4g,ipco, roller chain,p/n:023015,rotoform 4g,ipco, chn cplr link,pn:023014,rotoform 4g,ipco, o-ring, part no. g-dn-0023565, o-ring part no. g-dn-011408, o-ring part no. g-dn-010773, o-ring part no. g-dn-010815, slotted screw part no. g-dn-003012, cup spring , part no. g-dn-022686, sealing ring, hardened p/n. g-bt-023884, o-ring,p/n-g-dn-002176, o-ring,p/n-g-dn-002220, o-ring,p/n-g-dn-002219, set screw, id: g-dn-002968

State Government

CTN :44977863

08 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

State Government

CTN :44953260

11 May, 2026 1.77 Lacs

Sarni - Madhya Pradesh

Tender For enquiry for work of machining of hp and ip control valve and parallel keys for aoh of 250 mw unit no.10, ph-iv, stps, sarni.

CTN :44959371

12 May, 2026 NA

Mumbai - Maharashtra

Tender For tender for supply of vibration damper set (motor side) , driving plate , schredder valve , gas equalising valve , protecting cap , spring washer , flange , gasket , gasket , spring washer , retaining ring , pressure ring , spring washer , oil pressure relief valve , connecting flange , vibration damper set , joint ring , gasket , hexagon head screw , hexagon head screw , hexagon head screw , washer , washer , spring washer , vibration damper set (motor side) , hexagon head screw , ref compressor oil bse 170 (10ltr) , cabel connector , bottom plate , thrust washer , shaft seal , hexagon head screw , hexagon nut , washer , give - head key for stator , set screw , thrust coller , spacer sleeve , fixing plate , mounting (crank case side) , gasket , head socket cheese head screw , sealing screw , piston pin , gasket , gasket , pressure relief valve , sealing screw , magnetic screw , gasket , protecting cap , washer , bearing bush (motor side) , thrust washer (motor side) , mounting (motor side) , gas equalising valve , shut off valve , oil filter , pipe connection , sealing plug , o ring , gasket , pressure bush , plate , heaxagon head screw , hexagon head screw , hexagon nut , parallel key , hex socket cheese head screw , parallel pin , gasket , washer , gasket , joint ring , hexagon head screw , hex socket cheese head screw , pipe connection , sight glass , suction gas filter , sealing plug , clamping plate , gasket , gasket , head socket cheese head screw , bearing bush (crank case side) , oil filter , pipe connection , sealing plug , sealing nut , o ring , gasket , hexagon head screw , sealing screw , head socket cheese head screw , joint ring , sealing plug , mounting (motor side) , pressure relief valve , half length taper grooved pin , joint ring

Central Government/Public Sector

CTN :44935756

30 Apr, 2026 NA

Haridwar - Uttarakhand

Tender For complete machining of miscellaneous st components with bhel materials - holder, adjusting piece, adjusting piece, adjusting piece, plate, shim carrier, holder, holder, flushing device, adjusting piece, aligner plate, adjusting piece, adjusting piece, adjusting piece, adjusting piece, holder, adjusting piece 56x200x210, adjusting piece, adjusting piece, flushing device, parallel key, parallel key, cover, cover 36x55x95, plate 40x80x180, adjusting piece, parallel key, angle, angle

CTN :44952907

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.ws/s-yd/10/04/26-27/bg/cond./8w/emu motor coach and trailer coach description- iron and steel scrap cutup parts of bg cond./8w/emu motor coaches and trailer coach with or without n.f attachment, without contents if any. 1) se 10633 emu-mc 2) se 10632 emu-mc 3) se 10635 emu-mc 4) se 10636/108636 emu-mc 5) se 10954/108954 emu- tc 6) se 10950/108950 emu-tc nb: [1] (a) 04 emu motor coaches are to be sold without : i) buffers. ii) screw coupling. iii) bearing bolt. iv) draw and buff gear. v) draw hook with collar. vi) semi permanent coupler end -a. vii)semi permanent coupler end -b. viii) draw and buffer gear. ix) centre pivit pin top bush. x) centre pivot pin bottom bush. xi) wearing piece. xii) compensating ring. xiii) wheel sets 16 nos. xiv) oil pump motor. xv) radiator motor. xvi) rectifier cooling motor. xvii) transformer. xviii) choke tank (sl, tl & dl). xix) traction motor complete with pinion. xx) suspension brass bearing. xxi) auxilary compressor. xxii) battery charger. (b) 08 nos.bogie frames(trolley) are to be sold with fittings without primary suspension against srl no.01 to 04 . nb:[2]: emu trailer coaches are to be sold without 08 nos wheel sets along with roller bearing against srl no 05 and 06 and 04 nos bogie frame with complete fittings against srl 05 and 06 and other excluded fitting list as per latest excluded fittings /coach 1271 dated 13.09.2018. nb: [3] special condition for rolling stock- a) all excluded materials including wheel sets and bogie's fittings are to be handed over by the purchaser at the nominated location for which they have to arrange labour /tools/ equipment for loading of the excluded items from cutting site and then transport to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28 trolley, coil spring, screw coupling, buffer sets etc. (ii) sse-19 wheel sets (iii) sse-30 ep unit (iv) sse-53 & 56 other emu items to be hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 parcent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 parcent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser has cleared all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:[4] 24 nos. wheel sets with complete fittings and with excluded fitting (released item) and 04 nos.bogie frame with complete fittings are to be handed over by the purchaser to concerned location as advised by concerned sse. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys. [custodian/stock holder - sse-emu-56 for motor coaches and sse-carraige-kgpw for tc coaches]

CTN :44952915

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/mn/21/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) sc 057422/c gs 2) se 058413 gs 3) se 058414 gs 4) sc 037231/c wgscn 5) se 058254 wgscn 6) se 058227 wgscn nb: [1]. (a) all coaches are to be sold without 24 nos. wheel sets complete alongwith roller bearing against srl no 01 to 06 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 05 nos. serviceable bogies against srl no: 01-01 (end-1), srl no.02-01 (end-2), srl no.04-01 ( end-1) and srl no. 06-02 (both bogies are serviceable) (c) the coaches are to be sold with 07 nos.unserviceable bogies without excluded fittings. against srl no. 01-01, srl no 02-01, srl no.03-02, srl no 04-01 and srl no 05-02nos. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 05 nos of bogies with complete fittings & 24 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

CTN :44952916

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/mn/22/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 058802 wgcb 2) cr 054534 wgscn 3)wr 052380 wgscn 4) er 022337 wgscn 5) ec 024283 gs 6) nr 05272 wgscn 7) se 048702 gslrd nb: [1]. (a) all coaches are to be sold without 28 nos. wheel sets complete alongwith roller bearing against srl no 01 to 07 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 02 nos. serviceable bogies against srl no: 04-02 (both bogies are serviceable) (c) the coaches are to be sold with 12 nos.unserviceable bogies without excluded fittings. against srl no. 01-02, srl no 02-02, srl no.03-02, srl no 05-02, srl no 06-02nos and srl no 07-02. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 02 nos of bogies with complete fittings & 28 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

Parallel Key Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

State Government

State Government

Central Government/Public Sector