Latest parking meter Tenders | Government parking meter Tenders

State Government

CTN :39996366

06 May, 2025 3.45 Crore

Kanchrapara - West Bengal

Tender For supply, storage, installation, commissioning and trial run of electro-mechanical equipment at raw water and clear water pumping station under kanchrapara municipality. - for rwps, supply, delivery , storage, installation, testing & commissioning of vertical turbine type centrifugal pump with cashion pipe ,column assembly, discharge head, sole plate, motor stool and all other accessories all complete of 750m /hr discharge at a head of 29 mtr at duty point as per technical specification . maximum allowable speed of pump shall be 1000 rpm., supply, delivery , storage, installation, testing & commissioning of vertical, scim ,tfec, 110 kw (minimum), 415 v 10% , 50hz 05%, speed 1000 rpm (syn) , to vertical pump duty motor to match with pump at sl no- (1) complete with coupling hub and all other accessories as per specification., supply, delivery , storage and installation at site of ms pipes, specials, joints, flanges as per specification and technical offer. (for both individual pump delivery pipe and extended part of common manifold if required) ., supply, delivery and installation and commissioning of valves complete at site with fixture as per specification and technical offer & as follows :-, di butterfly valve for delivery side of pump fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line. (350 mm minimum))(pn 16 type), di non-return valve for individual pump delivery pipe line. (350 mm. minimum))(pn 16 type), supply, delivery at site and storage of m.s. dismantling joint assembly for the individual pump delivery pipe line as per specification (350 mm minimum)., supply, delivery ,storage and installation at site of pressure gauges complete with fittings and fixture as per specification, pressure gauge for delivery side (0 10 kg / cm2), supply, delivery ,storage and installation at site of pressure transmitter complete with fitting and fixture as per specification as follows:-, pressure transmitter for delivery side ( 0 10 kg / cm2 ), supply, delivery at site and installation of m.s. structural materials for cable tray / rack, panel installation supports, pipes & valves supports, fabricated stairs & all other fabrication work., lt panel, modification / retrofitting/expansion/addition of the existing pmcc with supply , delivery & installation of a new additional motor starter feeder at rwph in order to accomodate the extra pump-motor feeder of requisite rating not less than 110 kw .the modification/addition should match/synchonise the existing panel and should ensure smooth operation of the complete panel as a single entity and should be fit to install at the existing pump house., retrofitting of existing control desk at site with supply,wiring, installation of additional items like temparature scanner , multifunction meter , microprocessor based position indicator, digital pressure indicator,tnc switch, push button switch, indication lamps etc .as required to complete for the new pump motor set., supply ,delivery, laying, installation of power cable of adequate size from motor feeder to motor .(min. 2 run x 3core , 185 sq mm xlpe armoured al. for each feeder), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to motor space heater . (min. 3 core 2.5sq mm. armoured cu for each motor), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to valve actuator etc. elsewhere required. (min . 4 core 2.5 sq mm. armoured cu), making end termination of all the power cables as stated in sl no 11,12,13 with all necessary equipments like termination kits(dry type), lugs , glands etc , installed for the modification job., supply ,delivery, laying, installation of control cables of different size as required for the purpose and length for completing the different control connections between control desk, motor feeders , lpbs, pmcc etc.to the satisfaction o

CTN :39997012

19 Apr, 2025 4.46 Lacs

Gauriganj - Uttar Pradesh

Tender For replacement of idf/mechanical/china/burned meter under jurisdiction electricity distribution division-tiloi, distt. aemthi.

CTN :39741420

21 Apr, 2025 NA

Betul - Madhya Pradesh

Tender For corrigendum : supply installation and commissioning lab equipments , etc - package1, anemo meter, binocular dissecting microscope, binocular microscope, cod analyser, digital colony counter, digital tds meter, dslr camera, farmel s photometer, ganongs photometer, ganongs respirometer, microscopic camera, moll.s half leaf apparatus, ph meter, slide cabinet with 12 showcase, slide reader, mirowave oven, compound micrscope, dissecting microscope, research microscope with digital photography, micropipette 10, micropipette 20, micropipette 100 l, herbarium cabinet, water and soil testing kit, dna isolation kit, colorimeter, auxanometer, noise level meter, ph electrode, water bath double wall, tissue culture rack, dissolved oxygen meter, slide box 50 slides, dissection kit, osmotic pressure appratus, micro tips 10 l, micro tips 200 l, d.o. meter, digital conductivity meter, ph meter, digital balance, magnetic stirrer, digital colorimeter, melting point apparatus, digital potentiometer, water bath rectangular, polarimeter, refrigerator, reflux condenser, chemical storage rack, h2s gas keep apparatus, vacuum pump, melting point/boiling point apparatus, sprayer with rubber bulb, exhaust fan, desiccator, chromatography jar, mortar and pestle, gas lighter, stop watch, laminar air flow/ laminar hood, electrophoresis unit (horizontal) with power supply, autoclave, gel documentation system, centrifuge, colony counter, homogenizer, incubator (orbital shaking), ph meter (microprocessor based), bod incubator, cod analyser, tds meter, digital thermometer, flame photometer (photo diode sodium, potassium,, soil and water analysis kit, mili-q water purifier, micropipette10 l, micropipette 20 l, micropipette100 l, micropipette1000 l, turbidity meter, stethoscope, sphygmomanomet er, cold box, glucometer, anatomy structure model stomach part (human torso complete), anatomy structure model ent part, anatomy structure model digestive system, anatomy structure model genital and pelvis, colorimeter, pcr tube (tarsons individual pcr tube 0.5 milliliter), micro tip box 10-200 l, micro tip box 100-1000 l, micro tip box 1-20 l, micro tips 200 l, micro tips 1000 l, pcr tube 0.5 l, pcr tube 0.2 l, reagent bottle 100 ml autoclavable, reagent bottle 500 ml autoclavable, eppendorf 15 ml, inoculating loop, petridish 75 mm, falcon tube 15ml, falcon tube 50ml, dna-isolation kit, refrigerated micro-centrifuge, centrifuge tube, thermo-mixer, mortar and pestle, petri dish, dissection kit, nanodrop (biored), conductivity meter, research microscope with digital photography, ultra low temperature lab deep freezer (-80c), analytical balance, ultra centrifuge, deep freezer (-20 degree c) blue star 401-500 liters, refrigerator (4 degree c) double door, electrophoresis unit (vertical) with power supply, thermocycler semi-quantitative, conical flask 100 ml autoclavable, conical flask 500 ml autoclavable, conical flask 1000 ml autoclavable, beaker 50ml, cover slip 10 box, petridish 75mm, beaker 50ml, beaker 250 ml, conical flask 250ml,500ml, water cooler with purifier, rydberg s constant using hydrogen discharge tube, frank hertz experiment, fabry- parot etalon, millikan s oil drop method, pn-junction diode, zener diode, pnp/npn transister(ce and cb mode), jfet, electricalkettle with variable voltages, platinum resistance thermometer, electromotive force of a thermocouple, clement- desorme s method, thermal conductivity using calorimeter, mechanical equivalent using joule calorimeter, critical constant of a gas/vapour, poiseuille s method, maxwell s needle appratus, determination of moment of inertia, determination of force constant of a spring, lcr circuit, determination of poisson s ratio of rubber, lissajous figures with the help of cro, melde s experiment, i- curve byspectrometer, prism using sodium light, newton s ring (plano-convex), liquid using newton s ring, sodium light using plane defferaction grating, polarimeter, resolving power of a telescope, charging and dischar

CTN :40001073

26 Jun, 2025 NA

Delhi - Delhi

Tender For procurement of spares for su-30 mki aircraft - battery assy (elm-0310h), launcher p-72 safety pin, shear element, mbd-3 safety pin mechanical, strap, ndb antenna, safety line, sear element of the start switch cover, shear element, protective apron, casing, special sarfind nato socket to 3.5 jack adopter lead, spectro photo meter, screened enclouser type sartech fc2, eps, shear element, presure pump with gauge, pcb, pcb, shear shaft, outlet union from rk, main processor unit, graphic controller unit, mode selector s/w, seat travel sensor (dkh470-1070), tester for air flow indicator, motor unit assembly

CTN :39983039

27 May, 2025 NA

Delhi - Delhi

Tender For procurement of spares for mirage aircraft - torque wrench tool kit, test adopter, flow meter gauge, adapter, drop tank transportation trolly, firing circuit test, cable test, oxy trolley, adapter mechanical test, wrench, oxy repleshnising adaptor, a/c harmonization, sherlock tool kit, set of pipe for pressure generator, adaptor test, case test, crane workshop, thread insert tool, screwing tool kit, contact checking tool kit, oscilloscope, p/s airtightness test set, valve releasing, hoisting assy

corporations/Associations/Others

CTN :40002496

29 Apr, 2025 NA

Indore - Madhya Pradesh

Tender For auction sale of iron steel scrap (field return),aluminum wire-transformer winding scrap,scrape of energy meter mechanical type,scrape of energy meter electronic/static type,fiber scrap,25 kva 11/0.4 kv bgp failed alu winding dist (u/e) transformer without oil,63 kva 11/0.4 kv bgp failed alu winding dist (u/e) transformer without oil,100 kva 11/0.4 kv bgp failed alu winding dist (u/e) transformer without oil,200 kva 11/0.4 kv bgp failed alu winding dist (u/e) transformer without

Central Government/Public Sector

CTN :39986285

01 May, 2025 NA

Sonbhadra - Uttar Pradesh

Tender For supply of w96716155937 drg: 31611770113 rev: 00 condenser air evacuation package (vacuum pump) spec: he57016 re , w96716155317 drg: - rev: 00 complete vacuum pump (bare shaft vacuum pump) spec: he57016 rev: 04 , w96716155325 main motor for vacuum pump spec: he57016 rev: 04 , w96716155465 heat exchanger for vacuum pump package. spec: he57016 rev: 04 , w97716155580 impeller & shaft assembly (complete) , suitable for 30 scfm vacuum pump. spec: he57016 r , w97716155253 coupling complete (for vacuum pump of 30 scfm) spec: he57016 rev: 04 size: to suit the , w97716155059 bearing for vacuum pump (30 scfm) (1set= 2 nos) spec: he57016 rev: 04 size: to suit origi , w96716155589 complete set of gaskets, o-rings for heat exchanger spec: he57016 rev: 04 , w97716152050 complete set of mechanical sealing assembly (de&nde) / gland packing assembly (as applic , w97716155431 seal water recirculaton pump asembly(along with motor etc. ) - for 30 scfm vacuum pump s , w97716155822 pressure transmitter for vacuum pump system: 0-1 bar abs spec: he57016 rev: 04 , w96716155813 level transmitter for vacuum pump spec: he57016 rev: 04 , w96716155210 drg: 31611770047 rev: 00 differential pressure switch for vacuum pump. spec: he57016 rev , w96716155490 flow indicator cum switch for vacuum pump spec: he57016 rev: 04 , w97716155547 level gauge for vacuum pump separator tank spec: he57016 rev: 04 size: to suit original , w97716155733 drg: to suit original supply rev: 00 pressure gauge (0 to -1 bar) , w97716155741 drg: to suit original supply rev: 00 pressure gauge (service water) , w97716155466 temperature gauge 0-100 deg c, for vacuum pump heat exchanger size: 0 to 100 deg c , w96716155457 differential pressure gauge for vacuum pump package duplex filter spec: he57016 rev: 04 , w97716155849 drg: to suit original supply rev: 00 air flow meter (rotameter) for vacuum pump system s , w96716155244 drg: 31611770051 rev: 00 temperature transmitter for vacuum pump spec: he57016 rev: 04 , w97716152033 temperature element for vacuum pump spec: he57016 rev: 04 , w97716152041 thermowell for temperature element spec: he57016 rev: 04 , supervision of commissioning lump sum per man day charges at site, including every expense at our si , supervision of commissioning lump sum per visit charges (to &fro) including travelling time & all ex

Central Government And Public Sector

CTN :39978436

01 May, 2025 34.81 Lacs

Kaiga - Karnataka

Tender For supply, fabrication, welding/joining, erection and testing of hdpe piping from kgs 3 and 4 to kaiga 5 and 6 area. - supply items (schedule-a), 100 nb equal tee sch 40 astm a 234 gr. wpb sml bw ansi b 16.9, 1oo nb sorf flange 150 # astm a 105 ansi b 16.5, 100 nb blind flange 150 # astm a 105 ansi b .16.5, 100 nb gate valve manual op. flange end 125/150 # sa 216 gr. wcb ansi b 16.34, 100 nb ball valve manual op. flange end 125 /150# hdpe, suit to 100 nb,sa 105, 150 # ansi b 16..5 back ring flange, flange end mechanical type flow totalizer 150# (range 150000 to 200000 cu. mtr.capacity) to suit to 100 nb sa 105 flange 150 #, ansi b 16.5. flow meter totaliser specification, dn-110 hdpe pipe is 4984 gr. pe 80 pn 6, dn-110 hdpe 90 degree elbow, is 4984 gr. pe 80 pn 6 as per is 8008, dn-110 pipe /stub end, 1s 4984 gr pe 80 pn 6 as per is 8008., 100 nb cs back ring flange astm a 105 as per ansi b 16.5 150#, dn-110 hdpe equal tee, is 4984 gr.pe 80 pn 6, as per is 8008, dn-50 hdpe cap, is 4984 gr. pe 80 pn 6, as per is 8008., hexagonal headed bolt, nut with washer 85 mm long is 1363 gr. 6.3 /is 3757 gr. 8.8, ismc 100 is 2062 , e 250 gr. a, 12 mm thick plate is 2062 , e 250 gr. br, 110 nb ms u clamp 25 mm wide x 3.5 mm thick, 100 nb m 12 u bolt is 2062 e 250 gr. a, m 10 x 100 hst/faz, 1.6 mm thk caf gasket 100 nb is 2712 gr. w/3, erection item (schedule-b), butt fusion welding / joining and laying of dn- 110 hdpe pipe, is 4984, grade pe 80, pn 6 both under ground and above ground., butt fusion welding / joining and erection of dn-110 90 degree elbow, hdpe, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of both end), butt fusion welding / joining and erection of dn-110 hdpe equal tee, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of three end), butt fusion welding / joining and erection of dn-110 hdpe pipe end /stub end is 4984, grade pe 80. pn 6, butt fusion welding/joining and erection of dn-50 hdpe cap is 4984 grade pe-80 pn-6, installation of 100 nb hdpe ball valve without welding., fabrication , erection , welding, inspection,surface cleaning & supply and application of hb chlorinated rubber zinc phospate primer paint in two coats to minimum 100 micron dft and supply and application of hb chlorinated rubber finish paint in two coats to 60 micron dft for cs structural steel support and components., installation of anchores m10 x 100 mm hst/faz including handling,scafolding,labour & tools., removing & reinstallation of precast concrete slab 0.3 m (l) x 1.350 m (w) x 0.1 m (t), excavation and backfilling of excavated trenches with the soil after completion of installation of pipe lines and testing including levelling/grading, compaction to the required level 1.5 m (d)x 0.8 m (w), sand bedding 50 mm depth x 400 mm width for underground hdpe piping including supply of sand., dismantling of existing dn-50 hdpe piping including breaking of existing cement concrete ( 0.7 cub.mtr) & pcc to be done after breaking and removing of existing cement concrete, including tools, labour & disposing of unservicable material as directed by eic, carefully removing the korean grass along with soil of 100 mm to 250 mm depth and 1500 mm width including replacing the same removed korean grass along with soil after laying hdpe line along with tools & tackles,watering of grass,dressing of area etc.in all complete as per direction of eic

CTN :39952770

22 Apr, 2025 8.20 Lacs

Shivpuri - Madhya Pradesh

Tender For boom barrier supply and installation work - barrier gate-model - sp bb 4006m4sled (electro mechanical, motorised with 6 meter boom (aluminum hollow section 100x44mm) open time 4 sec / right installed/ 2 nos remote/ 1200 times per day, steel housing box with led, support stand, control pcb)barrier dimension- 920 h x 285 d x 335 wboom length- 6000 mm

State Government

CTN :39928025

25 Apr, 2025 23.15 Lacs

Multi City - Karnataka

Tender For design ,manufacture , testing, inspection & supply of single phase, three phase & ht electronic portable reference meter- calibrators - to cesc with complete accessories, operation and maintenance manual & training on operation for calibration of electronic and electro mechanical meters at site as well as in the laboratory as per specifications.

Parking Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector

State Government