Latest particle board shutter Tenders | Government particle board shutter Tenders

State Government

CTN :45482296

13 Jun, 2026 49.9 Thousand

Nadia - West Bengal

Tender For notice for the vbgram materials supply - supply of first aid box including medicines (specified by pia) at, model citizen information board for ibs( specification-made of, with a height of 3ft, width 2ft and thickness of 4 inch & 30 degree, head with pentagonal shape including fixing the mgnrega, biswa bangla logo in upper side of the board and supply in, mgnrega worksite anywhere., model citizen information board for community (specification-, of brick structure with plastering and colour ( back colour, and black for writting) with a height of 4ft, width 3ft and thickness, 4 inch & 30 degree in head with pentagonal shape including fixing, the mgnrega and biswa bangla logo in upper side of the board, supply in the mgnrega worksite anywhere., g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size, mmx47 mm with a wall thickness of 5 mm, made out of extruded, mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated, factory made solid panel pvc door shutter consisting of outer, made out of m.s. tubes of 19 gauge thickness and size 19 mmx19, mm for styles, top and bottom rails, m.s. frame shall have cost, steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame, made of flat bent bar, end bifurcated with necessary screws etc., cement concrete(1:2:4) as per direction. (cost of concrete will be, paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured, from extruded section conforming to i.s. specification (i.s. 205/66), and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x, 4.0mm, anodised aluminium barrel / tower / socket bolt (full covered) of, approved manufactured from extruded section conforming to i.s., 204/74 fitted and fixed with cadmium plated screws: (vi) 200mm, long x 10mm dia. bolt., anodised aliminium d-type handle of approved quality, manufactured from extruded section conforming to i.s. specification, (i.s. 230/72) fitted and fixed complete: (a) with continuous plate, base (hexagonal/ round rod) (iii) 100 mm grip x 12 mm dia rod., (c) supplying 6 levers 'godrej' crystal satine mortice lock with keys, including fitting & fixing complete., i) iron hasp bolt of approved quality fitted and fixed complete, (oxidised) with 16mm dia rod with centre bolt and round fitting. (, 200mm long, door stopper.(brass), red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings, conforming to is-13592-1992 (a) (i) single socketed 3 meter length, (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings, conforming tois:13592-1992 with all necessary clamps nails,, including making holes inwalls, floor etc. cutting trenches in any soil, through masonry concrete, structures etc if necessary and mending good damages including, joining withjointing materails (spun yarn, valamoid/bitumen/m-seal, etc) complete. a) upvc pipes: (ii) 110 mm. dia., s, d) shoe (ii) 110 mm. dia, qgs seed(10 variety), g.i. hollow pipe squre or

CTN :45507212

17 Jun, 2026 28.51 Lacs

Delhi - Delhi

Tender For upgradation of mps bungalows at north/south avenue under sub-div.-i of pawd-iii, new delhi, dg. 2026-27. (sh: replacement of driveway tiles, wire gauge shutter works, red sand stone flooring work, cc tile work, boundary wall work, gypsum ceiling work & other miscellaneous civil work at bungalow no. 6 md road, 3 pp marg, 7 pp marg and 1 tk lane).subwork/packages:civil work

State Government

CTN :45447017

11 Jun, 2026 NA

Nadia - West Bengal

Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol

Central Government/Public Sector

CTN :45458953

19 Jun, 2026 NA

Ajmer - Rajasthan

Tender For auction sale of others - quarter no :- 1441 ,2045 ,373 ab,l-94 & 95 , 288 422 ,1279 ab 1286 ab 1287 ab 1746 ab 1749 ab 1752 ab 1836 ab 1837 (23 unit) released rr masonary=2310.42 cum, released stone roof=1640.20 sqm, released ac sheet=559.80 sqm, released iron gate (off size) compund wall=765.30 kg, =, released wooden door (off size) =142 no, w/gauge wire shutter door without chokhat=31 no released wood veintilation=8 no released wooden window (off size) =76 no released iron door (off size) =2280 kg = released section window (off size)=124 kg = released brick masonary=91.92 cum released iron jaffery with door )=4931 kg = released u/s rail (41r)=392.82 kg = released u/s rail (50r)=8196.40 kg , released u/s rail (75r)=1037.88 kg, =, released beam (ismb 150 )=1122 kg, =, released beam (ismb 250 )=1063.05 kg, =, released g.i.pipe (dia 2 inch)=516.12 kg = released angle (65x65x6)=1679.74 kg = released angle 50x50x6mm=162 kg = released angle 45x45x6mm=241 kg = released angle (25x25x4)=1352.40 kg = released flat (50x6 )=415.50 kg = released iron gril (off size)=241.96 kg

Central Government/Public Sector

CTN :45446787

12 Jun, 2026 NA

Raigad - Maharashtra

Tender For providing and fixing of doors shutter and fly proof wire gauge to windows at academic building 3 and canteen of girls hostel at plot no.20 at nift, kharghar, navi mumbai

CTN :45296154

09 Jun, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of gun pit with ohp - tmt bar fe 550 grade 8mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 16mm dia , binding wire of 0.9mm dia , plywood 8 feet x 4 feet x 18mm bwr grade , plywood for roof shuttering 8mm waterproof , plywood for wall shuttering 14mm , scaffolding pole adjustable 7 feet long , nails 2 inch, 3 inch and 4 inch 10 kg each , pre-fabricated mild steel door of size 5300mm x 3500mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , pre- fabricated mild steel door of size 1300mm x 6000mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg per sqm , deck sheet curved shape 1.20mm tr-50 including all necessary clamps fittings and fixtures , quick setting compound , water proofing compound in 1 kg packing , fire resistance paint for internal surface , fire resistance primer for internal wall surfaces , synthetic enamel painting to steel surfaces , red oxide primer. , bitumen 80 oblique 20 grade , hdpe pipe 75mm dia best quality , fire extinguisher a and b and c type portable net 2 kg capactiy cylindrical isi marked , supply solar lantern model no ms122 solar lantern contains battery, solar panel, led bulbs , lighting conductors set complete with all accessories as per details given , prefab steel ms plate of size 1000x1000x4mm to frame of size 1050x1050mm , hdpe hose pipe 25mm dia corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set , pcc solid block 400x200x200mm , 100mm thick interlocking tiles machine pressed precast concrete paver block , cement ppc oblique opc 53 grade in poly bag of 50 kg each , sand coarse conforming to is-383 , stone aggregate coarse 20 mm conforming to is-383 , stone aggregate coarse 40 mm conforming to is-383 , hesco basket , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle isi marked , fish line best quality , wood cutting blades , iron cutter blades 14 inch , plumb bob iron best quality , galvanised iron pan mortar 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle , picks axes with chiesel and point ends , showel square nose 14 gauge tata high carbon steel , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft , multipurpose non-slip rubber reusable gloves , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage , portable ms body needle vibrator machine with power 3 hp to 5 hp

State Government

CTN :45403999

22 Jun, 2026 NA

Chatarpur - Madhya Pradesh

Tender For building material-doors (wooden membrane door): 1. made of pinewood and finished with wood paint. 2. isi certified. 3. minimum door thickness: 30 mm. doors (wpc – wood plastic composite) solid: 1. made of wpc material. 2. isi certified. 3. door thickness: up to 30 mm. 4. density: 50. wooden door frames – sal wood (sawn timber). aluminum section complete door/window (isi marked): rounded profile, 20-22 gauge, 4 mm thickness. 1. sliding window with aluminum frame and pebbled glass, complete with stainless steel mesh. 2. bearings and locks made of aluminum. 3. frame in silver finish. 4. rubber gasket: 4 mm. iron gate/frame, iron board. insecticide – chlorpyrifos 20% ec. urea fertilizer. nails (3-inch). black japan bitumen paint. g.i. wire. topsoil. growth hormones. copper wire for electrical fittings (2.5 mm). copper wire for electrical fittings (1.5 mm). electrical wiring cables (10 amp, 16 amp, 20 amp, 25 amp, 32 amp); orient ceiling fans; iron grills for windows; painting materials; wall putty; white cement (for whitewashing); paints; emulsion; distemper; laminated flush doors (shutter thickness: 30 mm); ceramic glazed bathroom floor tiles (30x30 cm, isi-marked, thickness: 6–7 mm, with a premium quality certification/label on the packaging); vitrified floor tiles (60x60 cm, isi-marked, thickness: 9–10 mm, double-charged/layered, with a premium quality certification/label on the packaging); ceramic glazed bathroom wall tiles (30x45 cm, isi-marked, thickness: 6–7 mm, with a premium quality certification/label on the packaging); granite stone (thickness: 10–15 mm, premium quality); cow dung manure (2 years old, well-decomposed, with a moisture content of less than 15%, and free from pebbles, stones, and plastic); steel railings; kota stone (thickness: 15–20 mm). premium quality submersible pumps (cri) — 1 hp, 2 hp; cement (opc 43 grade, isi marked, weight: 50 kg); bricks (9" x 4" x 3") — fully kiln-fired and compliant with pwd sor standards; river sand — free from impurities such as soil, dust, gravel, or stones; crushed stone aggregate (10 mm, granite/black basalt); crushed stone aggregate (20 mm, granite/black basalt); crushed stone aggregate (40 mm, granite/black basalt); murrum (laterite gravel) & boulders — free from contamination by soil or black cotton soil; steel reinforcement bars (isi marked, thermo-mechanically treated/tmt) — 12 mm; steel reinforcement bars (isi marked, tmt) — 10 mm; steel reinforcement bars (isi marked, tmt) — 8 mm; steel reinforcement bars (isi marked, tmt) — 6 mm; binding wire; iron angles; paver blocks (60 mm) — colored and polished; profile sheets (corrugated/roofing tiles pattern); plastic profile sheets; g.i. (galvanized iron) profile sheets; stone dust.

CTN :45252818

04 Jun, 2026 NA

Sonitpur - Assam

Tender For bid to ras supply of reducer t 32 to 20 to 32 mm dia , ppr union 32 mm , tank connector 32 mm , pvc wall clamp 32 mm , pvc wall clamp 20 mm dia , float valve 25 mm , gate valve 32 mm , m seal 150 gm pkt , taplon tape roll , solvent cement 150 gm tube , pvc waste pipe 32 mm and 1m long , chromium plated waste coupling 32 mm dia , non skid ceramic tiles of size 300mmx300mm on the floor , cp grating 100 mm dia , pvc pipe 110 mm dia 3 mtr long , pvc socket 110 mm dia , pvc bend 110 mm dia , p trap , s trap , pvc air pipe 25 mm dia comma length 3 mtr , white cement , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size , ppr reducer elbow 32mm x 20mm dia , electric geyser 25 ltr , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm , brass chromium plated shower rose 100 mm dia with bend , urinal pot vitreous china bowl urinal pot flat back , pvc t 110 mm dia , brass cp jet water spray with 1 point 2m long flexible tube for ewc , ppr reducer socket 32 to 25mm , ppr plain socket 20 mm dia , ppr elbow 20 mm dia , distribution box 6 way spn comma 240 volts copper bus bar and neutral link , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty copper conductor of size 1 point 5 sqmm single core , pvc casing capping of size 1 inch medium grade snow white , switch piano 5 amp 230 volts flush type one way snow white , led tube light fittings 20w 230v box type 4 feets with crca body pre coated white and prewired for led tube complete , led mirror lights 1 feet 5 watts , steel screw full thread with rawl plug of 1 1 oblique2 inch size isi marked 100 nos per pkt , pvc switch board snow white size 7 inch x 4 inch for sockets and switches , pvc switch board snow white size 8 inch x 10 inch for main switches db , pvc l bend and t junction joint for pvc casing and capping , service bracket 40mm dia gi tubing medium grade 1 point 5 mtr long , cable pvc insulated electric cables heavy duty aluminum conductor of size 6 sqmm twin core , ceiling rose three terminal snow white , led bulk head fitting high with led lamp 10 watts , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round oblique square block , plastic body fresh air fan with louvers shutter of 200mm sweep , cable pvc insulated elecric cables heavy duty 1100 volts copper conductor of size 4 point 0 sqmm single core , switch socket combination snow white multipurpose 2 in 1 comma 15 amp 230 volts , monoblock pump set single phase capcity 2hp , distribution box 2 way with mcb spn 240 volts 10 amp , pvc flexible suction hose pipe 25mm dia , non return valve nrv metal 25mm dia , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm comma 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp //bid details 2 / 76 nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg w

corporations/Associations/Others

CTN :45346453

09 Jun, 2026 29.95 Lacs

Coimbatore - Tamil Nadu

Tender For improvement works and supplying of kitchen accessories to the amma unavagam at poo market , mettupalayam road in ward no.72 of west zone. - earth work excavation of building in kind of soilsand sup soilsand full depth as may be directed by the departmental officers with initial lift and leads and cleaning and leveling the site., cement concrete 1:4:8(one cement,four sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, supplying and erection shuttering,including necessary supports for plain in all floors using mild steel sheets of size 90x 60 cms and bg 10 stiffed with surfacewelded mild steel angles for boarding supported by casuarina props at suitable intervals etc. completecomplying with standard specifications as directed, for plinth beam, for lintel beam slab, for vertical walls, cement concrete 1:1.5:3 (one cement,one and half sand and three aggregate)using 20mm gauge hard broken granite stone jelly for all rcc items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in rcc works wherever necessary as per the direction of departmental officers complete, cement concrete 1:2:4 (one cement, two sand and four aggregate ) using 20mm hard broken granite stone jelly for all pcc items of work etc., complete fixturas directed by departmental officer ., supplying,fixing and placing in position mild steel /ribbed torsteel rods for all rcc works including cost of steel and binding wire also in all floors,complete complying with standard specifications(upto 16mmdia rods), fly ash brick work in cm 1:4 (one cement & four sand) using size 9"x4 3/8"x2 3/4" including finishing,curing,etc., complete complyingwith standard specification., plastering with cement mortar 1:3 (one cement and three sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, plastering with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, finishing the floor with 20mm cement concrete ( ellis pattern rst sort - no sand to be used) etc complete as directed., supplying, fabricating, erecting structural steel work for roofing welded or bolted type using ms channels, angles, plates and roundbars etc. conforming to is specification including primer coating and enamal painting as per design given by the departmental officers etc, complete as per standard specification., supplying and roofing with pplg sheet of selected colour fixed to required profile inclusive of brackets and screw arrangements etc.,complete, supplying and erecting pull and push type rolling shutter with i.s.i. make of approved size and section using 18 gauge g.i.sheet with manually operated type. the shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification., supply of man hole cover and frame is 12592 including fixing etc. extra heavy duty circular (228kg) 600 mm dia, supplying and fixing in position cement based hydrualically pressed anti skid tiles (pattern design) 20mm thick in cement mortar 1:3 (one part of cement and three part of plastering sand (p-sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification, dadooing the walls with first quality approved coloured glazed tiles of size 150x150x6mm laid in cement motar 1:2 mix to 10mm thick and pointing with white cement using 0.40kg per sqm including finiching the joints and surface etc., complete, flooring finishing with first quality ceramic tiles of all colours of size 305cm x 305cm x 6mm laid in cement motar1:3 mix to 20mm thick and painting with cement paint using 0.3kg 1m2 including finishing the joi

Central Government/Public Sector

CTN :45343096

03 Jun, 2026 NA

Ajmer - Rajasthan

Tender For auction sale of others - uarter no:- 441 ab,308 ab ,2129, 1314 ab & 1315 ab ,1316 ab , 1317 ab & 1318 ab,1512 abcd,1510ab, 2022 & 2070. total - 23 nos. quarters , abandoned quarter released rr masonary=1463.02 cum, released brick masonary=7.11 cum, released stone roof=1361.11 sqm , rcc slab=61.59 cum, released ac sheet=453.01 sqm, released wooden door with gouge door =22 no, released wooden door (off size) =109 no released gauge wire shutter door without chokhat=6 no released wood veintilation=22 no released wooden window (off size) =130 no released wooden jaffery =21.6 sqm released c.g.i sheet=450.36 kg released iron gate (off size) no compund wall=1962.1 kg released iron jaffery with door =200.25 kg released iron gril (off size)=2132 kg released iron door (off size) =2340 kg released section window (off size)=520 kg released flat (50x6 )=33.84 kg released u/s rail (50r)=5725.2 kg re-leased u/s rail (60r)=226.176 kg released beam (ismb 250 )=1428.59 kg released g.i.pipe (dia 2 inch)=820.579 kg released angle (65x65x6)=273.064kg released angle 50x50x6mm=381.6 kg released angle 40x40x6mm=154 kg rld. steel bar=311.21 kg

Particle Board Shutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector