Latest parting blade Tenders | Government parting blade Tenders

CTN :43206566

29 Dec, 2025 NA

Ferozepur - Punjab

Tender For material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting

CTN :43207872

06 Jan, 2026 NA

Raebareli - Uttar Pradesh

Tender For supply of single cylinder four stroke petrol engine test rig , single cylinder diesel engine test rig , hydraulic brake unit , transmission system gear box and clutch , firing order in si engine , universal milling machine , grinding machine , shaper machine , foundry shop , soldering and brazing experiment , bomb calorimeter calorific value of fuel , vapor compression refrigeration test rig , vapor absorption refrigeration test rig , cut section of rotary and reciprocating compressor , vortex tube colling apparatus , thermoelectric refrigeration test rig , support beam reaction apparatus , mild steel bending test on simply supported beam , spring deflection testing machine , whirling of shaft apparatus , inertia of a flywheel app , slider crank mechanism , universal vibration apparatus , cam analysis machine , motorized gyroscope three axis , journal bearing apparatus , universal governor apparatus , static and dynamic balancing apparatus , slip and creep measurement apparatus

State Government

CTN :42975278

29 Dec, 2025 3.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For corrigendum : purchase of furniture items - officer table :- providing and supplying table of size 5 x2 6 x2 6 with c-frame leg 200 mm wide made of aluminum profile and crca formed section having provision for wire management. top made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminate, wooden edge banding of edges. dotted embossed cable duct and with single drawer (w-350 mm, h-165 mm, d-475 mm) with branded telecopic channel. all steel components are epoxy powder coated after seven tanks. anti-corrosion., officer chair :- supply and placing high back revolving chair size total height 1030-1115 mm, depth 685 mm width 590 mm seat hight 425-510 mm, 5- prong nilony base for stability twin wheel heavy duty caster for easy mobility under load hot pressed plywood with steel t-nuts for rigid fasting seat and back are covered with pp cover, sturdy steel colum gas lift for center support and seat height adjustment, telescopic abs cover over steel colum low cable center tilt mechanism and with single piece integral center tilt mechanism and with single piece integral skin pu arm rest, quality tapestry high density molded pu cushion., staff chair :- supply and placing staff chair size total height 850 mm depth 570 mm, width 550 mm seat hi=eight 440 mm, uinder structure cantilever type ms crca tube 1.6 mm thick. hot pressed plywood with steel t-nuts for rigid fastening. single piece integarl skin pu arm rest. quality tapestry. high density pu molded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface., waiting chair :- supply and placing waiting three seater fixed chair, size ; total length 1800 mm, total height 750 mm, total depth 630 mm and seat height 410 mm, made of ms crca press formed seat components duly seamless welded to get proper finish chrome plated handles & base. steel perforated ms moulded one piece seat and back fitted in moulded chrome plated side strips, three individual seat fitted on ms tube support of 75 mm x 35 mm, seat and bottom support are powder coated., computer table :- supply and fixing in position computer table (work station) having size length 900 mm, width 600 mm, height 760 mm, c-frame & tubular crca steel structure, fabrication involves only mig/tig & spot welding. top & shelf made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminated, wooden edge banding of edge, shelf adjustable on steel brackets. removable tubular cpu stand and an embossed modesty panel below table top provided. provision for wire management, drum type leveler. all steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface., plastic chair:- plastic arm chair for office, godrej almira :- godrej interio almira slim size 2 door steel almira, 4 shedves, size length 1828 mm, width 914 mm, water cooler :-cooling capacity- 5 ltr./hr.number of taps- 2color- whiteweight- 10 kg., cash counter:-office reception table & cash counter desk of woodenproduct dimensionslength 48 , width 24 , height 36 approx., record rack :-material- mild steelno. of shelves- 5 shelvesmount type- finish type color- greyusage/application- officerack type- open rackappearance- modernproduct type- pre standing unitassembly required- no, bench :- product dimensions12d x 48w x 18h centimetersmaterial- stainless steekframe material- stainless steelcolour- silverstyle- antiquesize- 48"l x 12.3"w x 18"h overall size: 48"l x 12.3"w x 18"h, digital electronic safe locker for office with auto lock function, anti-theft alarm and led displays size length 500 mm width 350 mm

CTN :43164759

22 Dec, 2025 NA

Gurdaspur - Punjab

Tender For supply of stainless steel wire shelving rack or pot rack,pvc cabinet looking mirror of size 600 x 450 mm,pvc water tank 1000 ltr capacity,pvc water tank 500 ltr capacity,plate rack stainless steel of size 600mm x 600mm of thickness 1 mm,sink made of stainless steel 1mm thick kitchen with plugs washers,synthetic enamel paint white of 1 ltr pack,synthetic enamel paint green of 1 ltr pack,mild steel wire nails with head for wiremesh,paint enamel red of 1 ltrs pack,synthetic enamel paint yellow of 1 ltr pack,m-seal liquid,aluminium anodised barrel tower bolts of extruded section 200 mm long,mild steel wire nails with head for wiremesh door bid,mild steel wire nails with head for size not exc 50mm 10 nos,mild steel wire nails with head for size not exc 25mm 14 nos,mild steel wire nails with head for size not exc 100mm 10 nos,mild steel wire nails with head for door repairs size not,white cement

State Government

CTN :43117877

22 Dec, 2025 3.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For purchase of furniture items - officer table :- providing and supplying table of size 5 x2 6 x2 6 with c-frame leg 200 mm wide made of aluminum profile and crca formed section having provision for wire management. top made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminate, wooden edge banding of edges. dotted embossed cable duct and with single drawer (w-350 mm, h-165 mm, d-475 mm) with branded telecopic channel. all steel components are epoxy powder coated after seven tanks. anti-corrosion., officer chair :- supply and placing high back revolving chair size total height 1030-1115 mm, depth 685 mm width 590 mm seat hight 425-510 mm, 5- prong nilony base for stability twin wheel heavy duty caster for easy mobility under load hot pressed plywood with steel t-nuts for rigid fasting seat and back are covered with pp cover, sturdy steel colum gas lift for center support and seat height adjustment, telescopic abs cover over steel colum low cable center tilt mechanism and with single piece integral center tilt mechanism and with single piece integral skin pu arm rest, quality tapestry high density molded pu cushion., staff chair :- supply and placing staff chair size total height 850 mm depth 570 mm, width 550 mm seat hi=eight 440 mm, uinder structure cantilever type ms crca tube 1.6 mm thick. hot pressed plywood with steel t-nuts for rigid fastening. single piece integarl skin pu arm rest. quality tapestry. high density pu molded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface., waiting chair :- supply and placing waiting three seater fixed chair, size ; total length 1800 mm, total height 750 mm, total depth 630 mm and seat height 410 mm, made of ms crca press formed seat components duly seamless welded to get proper finish chrome plated handles & base. steel perforated ms moulded one piece seat and back fitted in moulded chrome plated side strips, three individual seat fitted on ms tube support of 75 mm x 35 mm, seat and bottom support are powder coated., computer table :- supply and fixing in position computer table (work station) having size length 900 mm, width 600 mm, height 760 mm, c-frame & tubular crca steel structure, fabrication involves only mig/tig & spot welding. top & shelf made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminated, wooden edge banding of edge, shelf adjustable on steel brackets. removable tubular cpu stand and an embossed modesty panel below table top provided. provision for wire management, drum type leveler. all steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface., plastic chair:- plastic arm chair for office, godrej almira :- godrej interio almira slim size 2 door steel almira, 4 shedves, size length 1828 mm, width 914 mm, water cooler :-cooling capacity- 5 ltr./hr.number of taps- 2color- whiteweight- 10 kg., cash counter:-office reception table & cash counter desk of woodenproduct dimensionslength 48 , width 24 , height 36 approx., record rack :-material- mild steelno. of shelves- 5 shelvesmount type- finish type color- greyusage/application- officerack type- open rackappearance- modernproduct type- pre standing unitassembly required- no, bench :- product dimensions12d x 48w x 18h centimetersmaterial- stainless steekframe material- stainless steelcolour- silverstyle- antiquesize- 48"l x 12.3"w x 18"h overall size: 48"l x 12.3"w x 18"h, digital electronic safe locker for office with auto lock function, anti-theft alarm and led displays size length 500 mm width 350 mm

corporations/Associations/Others

CTN :42827043

19 Dec, 2025 NA

Kolkata - West Bengal

Tender For supply of cnma 120408-2 2nu-cnga120408 insert , turninig insert cnga 120412-e-4sc pbc40s , dnma 150612-2 2nu- dnga150412 insert , vbmw160404 dbn250 vbmw160404- 2 wcb50 , turning insert dnmg 150612 nm9 wap 30 , sp300 pc5300 fx 3.1 e310n020 ce6 parti , parting holder- dia-42mm,make-wnt,e25 l00 , parting blade xlcfn 2603j31-fx 3.1mm , turning insert cnmg 120408- nm4wpp20 , turning inserts snmg 120412- nm4 wpp20 , parting insert-3mm,make-wnt,spec-gx24-2e , turning insert no.vcmt160404-hmp pc9030 , turning holder svjcl 2525 m 16 , dclnr2525 m12 turning holder , dssnr2525 m12 turning holder

Parting Blade Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others