Latest passenger reservation system Tenders | Government passenger reservation system Tenders

Central Government/Public Sector

CTN :45430539

06 Jul, 2026 NA

Chandigarh - Chandigarh

Tender For corrigendum : selection of bidder for implementation of online passenger reservation system and online reservation system in punbus/punjab roadways and prtc on design, develop, build, own, operate and transfer model

CTN :45594161

25 Jun, 2026 NA

Rourkela - Odisha

Tender For corrigendum : supply of 15watt, led recessed luminaire (ceiling light) clairr(clec15), led luminaire system efficacy (in lumen/watt): 90, shape of the fixture: round, size of the fixture: 150mm, type of mounting: recessed, led luminaire (recessed luminaire) with smd led chip, greater than equal to 120 degree beam angle, greater than equal to 85% led driver efficiency, greater than equal to 80 cri (colour rendering index), greater than equal to 0.90 power factor and rated voltage 220-240 volt, 50 hz, single-phase, minimum led chip efficacy (in lumen/watt): 130, led colour temperature: 6500k, diffuser material: polycarbonate (uv stabilized), input operating voltage range (ac, 50 hz): 90 volt to 300 volt, led life (in hours): 50,000, number of electronic control gear in the luminaire (power supplies): 1, total harmonics distortion: less than equal to 20% (for up to 20w) with ip20, conforming to is: 10322. [ warranty period: 30 months after the date of delivery ] ]

CTN :45644754

25 Jun, 2026 NA

Rourkela - Odisha

Tender For supply of 15watt, led recessed luminaire (ceiling light) clairr(clec15), led luminaire system efficacy (in lumen/watt): 90, shape of the fixture: round, size of the fixture: 150mm, type of mounting: recessed, led luminaire (recessed luminaire) with smd led chip, greater than equal to 120 degree beam angle, greater than equal to 85% led driver efficiency, greater than equal to 80 cri (colour rendering index), greater than equal to 0.90 power factor and rated voltage 220-240 volt, 50 hz, single-phase, minimum led chip efficacy (in lumen/watt): 130, led colour temperature: 6500k, diffuser material: polycarbonate (uv stabilized), input operating voltage range (ac, 50 hz): 90 volt to 300 volt, led life (in hours): 50,000, number of electronic control gear in the luminaire (power supplies): 1, total harmonics distortion: less than equal to 20% (for up to 20w) with ip20, conforming to is: 10322. [ warranty period: 30 months after the date of delivery ] ]

CTN :45454289

22 Jun, 2026 NA

Rourkela - Odisha

Tender For corrigendum : supply of 15watt, led recessed luminaire (ceiling light) clairr(clec15), led luminaire system efficacy (in lumen/watt): 90, shape of the fixture: round, size of the fixture: 150mm, type of mounting: recessed, led luminaire (recessed luminaire) with smd led chip, greater than equal to 120 degree beam angle, greater than equal to 85% led driver efficiency, greater than equal to 80 cri (colour rendering index), greater than equal to 0.90 power factor and rated voltage 220-240 volt, 50 hz, single-phase, minimum led chip efficacy (in lumen/watt): 130, led colour temperature: 6500k, diffuser material: polycarbonate (uv stabilized), input operating voltage range (ac, 50 hz): 90 volt to 300 volt, led life (in hours): 50,000, number of electronic control gear in the luminaire (power supplies): 1, total harmonics distortion: less than equal to 20% (for up to 20w) with ip20, conforming to is: 10322. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45331599

20 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For corrigendum : providing of custom bid for services - annual maintenance contract of existing online passenger reservation system oprs

State Government

CTN :45172672

13 May, 2026 NA

Multi City - Bihar

Tender For corrigendum : supply, installation, commissioning and maintenance of electronic weighing machines at fair price shops and bihar state food & civil supplies corporation limited godowns in the state of bihar

Central Government/Public Sector

CTN :45550700

30 Jun, 2026 NA

Uttara Kannada - Karnataka

Tender For supply of carbide tipped blade chain saw - conforming standards for the item - en/din/us/equivalent standards, type of engine- 2 stroke petrol driven air cooled, displacement-79 cc, output power - 5.5 hp, engine speed at no load - 10500 rpm, type of fuel - petrol, fuel tank capacity - 0.7l, ignition system should be electronic with preferably one button start up, fully automatic and adjustable chain lubrication system, automatic chain brake system for quick stoppage when required, air filteration system for petrol engine, type of blade - carbide tipped blade, length of guard bar- 16 inch (one piece construction), adjustable depth of cut ? 6 inch, full blade guard with adjustable depth limiter in inches - 8 (minimum 1 cm adjustment), chain speed- 25 meter per second, adjustable depth of cut - 06 inch, weight of carbide tipped chain saw- 6.3 kg, cutting chain detail- carbide tipped chain with 3/8 pitch with heavy duty tie straps and tempered rivets, protective carry case should be supplied with the machine, copies of test certificates and certifications as applicable to be furnished to buyer on demand at time of supplies, demonstration of equipment and training to be provided after completing supplies,make: makita-ea7900p45e/ hikoki/ dewalt, warranty- 03 years (oem). ]

CTN :45465678

19 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply, installation and testing of electronic equipments - supply -ece lab equipments, single output regulated dcvariable power supply- input voltage: 230v / 50hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply- input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator - frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, digital ic trainer kit with breadboard - +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie- points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulseper press)., dc voltmeter(digital) - dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc,accuracy: class 0.5( 0.5 % full-scale), dc ammeter - dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc,accuracy: class 0.5 ( 0.5 % full-scale), lvdttrainer kit - ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain gauge trainer kit - ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. instrumentation amplifiers with 3 digit display for strain / output voltage. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., ask modulation and demodulation kit - message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. supply voltage (board): +12 v, +5 v dc. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fpga trainer kit - must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb- uart bridge, usb cable. user manual., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

Central Government/Public Sector

CTN :45451905

22 Jun, 2026 NA

Delhi - Delhi

Tender For auction sale of - commercial advertisement rights through installation, operation and maintenance of dual display information system (ddis) at passenger reservation system (prs) counters over delhi division as per prs locations mentioned herein. the licensee shall install branded 22" to 32" led screens (measured diagonally end to end i.e. including frame/ border used for display) subject to availability of space on counters at each prs counters at stations and prs locations mentioned lot details. there are 165 prs counters operational over delhi division as per list attached with lot details.

Central Government/Public Sector

CTN :45422359

03 Jul, 2026 NA

Perambur - Tamil Nadu

Tender For supply of pre-printed pre-perforated journey cum reservation paper tickets in roll of 200 tickets each for computerized passenger reservation system (prs) on indian railway logo water mark, white security bond paper 115 gsm with plusor minus 5 percent tolerance in gsm conforming to is: 1848: 2018 (part-1), type of paper at serial no. (iii) (bond) of table 1requirements for writing and printing papers with specific requirements (para 4.8.2) of is:1848/2018 (part 1) as the paper manufactured out of pulp containing not less than 60 percent weight of pulp made from materials other than bamboo,hardwood, softwoods and reed. size of the tickets 180mm x 100 mm with sprocket holes on both sides and with perforation between the tickets. one unit is equal to 1000 tickets. detailed specification is enclosed in annexure prs 1 to 5. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Passenger Reservation System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector