Latest passivation machine Tenders | Government passivation machine Tenders

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

CTN :45468623

19 Jun, 2026 66.1 Thousand

Bathinda - Punjab

Tender For supply of carburator assy , air filter element , spark plug , rope starter , hose coller , stud , abrasive paper emery , thinner ailkil , electrod welding rod , nails steel wire1.2 , nails steel wire2 , fevicol sr 998 , insullation tape elect , plywood general purpose 11 , chain sprocket kit re , brake shoe assy rear re , air dryer assy tata , ac regulator switch mg , cover assy disc mg , clutch relese bearing mg , oil filter assy scorpio , mc top re , ac gas

Central Government/Public Sector

CTN :45406359

23 Jun, 2026 NA

East Singhbhum - Jharkhand

Tender For supply of welding electrodes b b - m.s.welding electrodes. 3.15 mm x 450 mm long , ferro speed m.s. welding electrode 4 mm dia , cast iron welding electrode size 4 mm x 350 mm long cinod160 e 119 , esab weld.electrod bronzoid 1 4mm , ador welding electrode lh 710- 4mmador welding electrode lh 710- 4mm , ss welding electrode 4mm esab

CTN :45360027

04 Jun, 2026 NA

Parganas - West Bengal

Tender For supply of spare parts for bd 80 veh - anabond red (175 gm)part no nk, araldite 175 gmpart no nk, cloth emery - 120part no nk, cloth emery - 180part no nk, cloth emery - 60part no nk, cloth malmalpart no nk, cloth white muslinpart no h28305000243, cotton wastepart no nk, electrod (e 900) 4 mmpart no 3439000147, electrodes welding ms gp 2.50 mmpart no g23439000016, female pinpart no nk, feviquickpart no nk, franch chalk powderpart no nk, halide sheet 0.5 mmpart no nk, halide sheet 1 mmpart no nk, hingespart no nk, hollow pipe 12 mmpart no nk, insulation tapepart no nk, iron rod 8 mmpart no nk, lt wire 2.5 sq mmpart no nk, m sealpart no h18010000084, male pinpart no nk, muskin tape 2 "/3" inchpart no nk, paint aluminium (silver) 1/2 ltrpart no h18010000114, paint red oxidepart no h18010000110, paint rfu ogpart no hi8010007499, paint syn enamel blackpart no h18010007482, paint syn enamel bluepart no nk, paint syn enamel whitepart no h18010000014, plastic tagpart no nk, ps greenpart no nk, puttypart no nk, ring snappart no 116mc11526, rust cleaner(zorrik 180 gm)part no nk, sodium hydroxide(caustic soda)part no h18040000019, solder soft 40-60(200grm=1pkt)part no nk, steel 40c8 r/bar dia 20 mm to is : 1570part no nk, stop push bottonpart no nk, strap 2"part no nk, thermal sleeve 8 mmpart no nk, thinnerpart no nk, thread tapepart no nk, welding electrode cast iron 3.15mm e 115part no nk, welding electrode ms dia 3.15 mmpart no nk

CTN :45363593

04 Jun, 2026 NA

Parganas - West Bengal

Tender For supply of spare parts for bd 80 veh - anabond red (175 gm) part no nk, araldite 175 gm part no nk, cloth emery - 120 part no nk, cloth emery - 180 part no nk, cloth emery - 60 part no nk, cloth white muslin part no h28305000243, cotton waste part no nk, electrod (e 900) 4 mm part no 3439000147, electrod ms 4 mm part no nk, electrodes welding ms gp 2.50 mm part no g23439000016, female pin part no nk, feviquick (20gm) part no nk, france chalk powder part no nk, halide sheet 0.5 mm part no nk, halide sheet 1 mm part no nk, hasp and staple shed latch lock (aps) part no nk, hinges part no nk, hollow pipe 12 mm part no nk, insulation tape part no nk, iron rod 8 mm part no nk, lt wire 2.5 sq mm part no nk, m seal part no h18010000084, male pin part no nk, muskin tape 2 "/3" inch part no nk, paint aluminium (silver) 1/2 ltr part no h18010000114, paint red oxide part no h18010000110, paint rfu og part no hi8010007499, paint syn enamel black part no h18010007482, paint syn enamel blue part no nk, paint syn enamel white part no h18010000014, plastic tag part no nk, ps green part no nk, putty part no nk, rust cleaner(zorrik 180 gm) part no nk, sodium hydroxide(caustic soda) part no h18040000019, solder soft 40-60(200grm=1pkt) part no nk, steel 40c8 r/bar dia 20 mm to is : 1570 part no nk, strap 2" part no nk, thermal sleeve 8 mm part no nk, thinner part no nk, thread tape part no nk, welding electrode cast iron 3.15mm e 115 part no nk, welding electrode ms dia 3.15 mm part no nk, dummy switch part no nk

CTN :45213958

28 May, 2026 NA

Allahabad - Uttar Pradesh

Tender For corrigendum : supply of sleeving elect pvc white 07 type id 0.65 mm , terminal lug pull and push type , lt wire black 5 mm , lt wire red 5 mm , lt wire white 1 mm , lt wire white 5 mm , plastic steel sleeve 16 mm , plastic steel sleeve 95 mm , wed cotton og 19 mm web thick og 19mm , screw self tapping parker no 06 x 3 by 4 inch , screw met hex hd coarse pitch precision steel 8.8 m 6 x 25mm , nuts bws prec a steel 8.8 hex zine plated 3 by 16 , nut met prec a steel 8.8 hex m 14 , nut met prec a steel 8.8 hex m 10 , bolt bsw prec a steel hex hd zinc plated 5 by 16 x 32 mm long , washer plain steel zinc plated 9mm , washer plain steel 4mm , pins cotter split steel 6.3mm x 40mm , pins cotter split steel 5.5mm x 63mm , pins taper solid steel 5 mm x 50mm , bolts met b oblique s hex hd um with hex hut faced on one side m 8x40 mm , washer spring single coil type b steel zinc plated nominal size 10 mm , gas welding steel mild 3.15 mm rod welding steel mild 3.15 mm , pins cotter split steel 2.5mm x 63mm , pin deep cotter split steel 4.0 mm x 40 mm , welding flux breezing bronze 450 gms container , nut plain hexagon 6.35 mm 1 by 4 bsw bs 1083 inlet pipe silencer , screws met hex hd cromium plate prec steel 8.8 m 6 x 20 mm long , screw matric hex hd hex hd cromium plate prec steel 8.8 m 8 x 20 mm long , nut met brass hexagon lock black 8.8 m 8 , washer spring single coil type b steel n size 16 mm , washer spring single coil type b type steel nominal m6 , twin jute , stockinette mk ii , cloth hessian light 100 cm wide , pin cotter split 3x32 mm , welding electrod cast iron 3.15 mm , sleeving plastic 3 mm black ) /bid number : gem/2026/b/7541696 * /dated: 15-05-2026 & & / bid document 1 / 33

Central Government/Public Sector

CTN :45284512

01 Jun, 2026 NA

Kota - Rajasthan

Tender For pvc flooring (vinyl) width 1620 mm minimum length 14 meters of thickness 2mm roll with pvc welding electrods. the length of electrod shall be 1.5 times of the pvc sheet length. confirming to rdso spec. no.rdso/2006/cg-12,rev.2. sample code for ac coaches ac-flg-01 (colour as per photo attached). accepted make-responsive/similar. (01 roll = 22.68 square meter total 06 rolls required) (warranty period : upto 72 months from the date of delivery.) sample must be approved by sse/rm/kota before bulk supply. [ warranty period: 72 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45091315

27 May, 2026 NA

Ajmer - Rajasthan

Tender For supply of pvc flooring (vinyl) width 1620 mm minimum length 14 meters of thickness 2mmroll with pvc welding electrods. the length of electrod shall be 1.5 times of the pvc sheet length. confirming to rdso spec. no.rdso/2006/cg-12,rev.2 . sample code for ac coaches ac-flg-01 [ warranty period: 72 months after the date of delivery ]

CTN :45107744

13 May, 2026 NA

Parganas - West Bengal

Tender For supply of spare parts for bd 80 veh - anabond red (175 gm) part no nk, araldite 175 gm part no nk, cloth emery - 120 part no nk, cloth emery - 180 part no nk, cloth emery - 60 part no nk, cloth white muslin part no h28305000243, cotton waste part no nk, electrod (e 900) 4 mm part no 3439000147, electrod ms 4 mm part no nk, electrodes welding ms gp 2.50 mm part no g23439000016, female pin part no nk, feviquick (20gm) part no nk, france chalk powder part no nk, halide sheet 0.5 mm part no nk, halide sheet 1 mm part no nk, hasp and staple shed latch lock (aps) part no nk, hinges part no nk, hollow pipe 12 mm part no nk, insulation tape part no nk, iron rod 8 mm part no nk, lt wire 2.5 sq mm part no nk, m seal part no h18010000084, male pin part no nk, muskin tape 2 "/3" inch part no nk, paint aluminium (silver) 1/2 ltr part no h18010000114, paint red oxide part no h18010000110, paint rfu og part no hi8010007499, paint syn enamel black part no h18010007482, paint syn enamel blue part no nk, paint syn enamel white part no h18010000014, plastic tag part no nk, ps green part no nk, putty part no nk, rust cleaner(zorrik 180 gm) part no nk, sodium hydroxide(caustic soda) part no h18040000019, solder soft 40-60(200grm=1pkt) part no nk, steel 40c8 r/bar dia 20 mm to is : 1570 part no nk, strap 2" part no nk, thermal sleeve 8 mm part no nk, thinner part no nk, thread tape part no nk, welding electrode cast iron 3.15mm e 115 part no nk, welding electrode ms dia 3.15 mm part no nk, dummy switch part no nk

Central Government/Public Sector

CTN :45147276

22 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of s.s.to s.s welding electrod 4.00 m. e308l , gmaw welding wire - er70s-6, dia-1.2mm. , gtaw welding wire - er309l, dia-2.4mm , gtaw welding wire - er70s- 2, dia-2.4mm , tungsten electrode for gtaw, dia-3.2

Passivation Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector